Návod k obsluze hliníkové stavebnice robotického ramene diymore ROT3U 6DOF

1. Úvod

This manual provides essential information for the assembly, operation, and maintenance of your diymore ROT3U 6DOF Aluminium Robotic Arm Kit. This kit is designed for enthusiasts and students interested in robotics and mechanical assembly. Please note that this kit includes the mechanical components only; servos, control boards (e.g., Arduino), and power supplies are sold separately and are required for full functionality.

2. Bezpečnostní informace

• Malé díly: Tato sada obsahuje malé části, které mohou představovat nebezpečí udušení. Uchovávejte mimo dosah malých dětí.
• Nástroje: Assembly requires basic tools such as screwdrivers. Exercise caution when using tools.
• Elektrické komponenty: When integrating servos and control electronics (not included), ensure proper wiring and power supply to prevent damage to components or personal injury. Always disconnect power before making or changing connections.
• Pohyblivé části: Once assembled and powered, the robotic arm has moving parts. Keep hands and loose clothing clear of the arm's movement path during operation.

3. Obsah balení

The diymore ROT3U kit includes the following mechanical components:

• Aluminium alloy brackets for the arm structure
• Mechanické třamp/claw assembly
• Various screws, nuts, and bearings for assembly

Note: Servos (e.g., MG996R, MG995), control board (e.g., Arduino), and power supply are NOT included in this kit and must be purchased separately.

Image: All unassembled components of the diymore ROT3U Robotic Arm Kit, including aluminum brackets, screws, nuts, and the mechanical claw.

4. Nastavení a montáž

Assembly of the diymore ROT3U Robotic Arm requires careful attention to detail. While detailed step-by-step instructions are typically provided with the product packaging or available online, the general process involves:

1. Sestava základny: Begin by assembling the base structure using the provided aluminum plates and fasteners.
2. Joint Construction: Attach the arm segments, ensuring proper alignment for each joint. Each joint will require a servo for movement.
3. Servo Integration: Mount the servos into their designated positions within the arm structure. It is recommended to use MG996R servos for joints that bear larger forces and MG995 servos for joints with relatively smaller force requirements.
4. Mechanismus drápů: Assemble the mechanical clamp/claw and attach it to the end of the arm.
5. Zapojení: Connect the servo wires to your chosen control board (e.g., Arduino). Ensure correct pin assignments and power connections.

Obrázek: Detail view of the robotic arm assembly, showing screws, nuts, and servo mounting points.

Image: Fully assembled diymore ROT3U 6DOF Robotic Arm with servos and wiring visible.

5. Návod k obsluze

The diymore ROT3U Robotic Arm is a 6-Degrees-of-Freedom (6DOF) system, meaning it can move and rotate in six different ways, allowing for complex movements and precise positioning. To operate the arm, you will need to:

1. Connect to a Control Board: Ensure all servos are correctly wired to a compatible microcontroller (e.g., Arduino, Raspberry Pi) and powered appropriately.
2. Programování: The arm requires custom programming to define its movements. This typically involves writing code (e.g., in Arduino IDE, Python) to control each servo's angle.
3. Kalibrace: Calibrate each servo to ensure its full range of motion is utilized correctly and to prevent mechanical stress.
4. Ovládání pohybu: Implement control logic for individual joint movements or inverse kinematics for end-effector positioning.

Image: Diagram illustrating the six degrees of freedom of the robotic arm, with numbered joints indicating each axis of movement.

6. Údržba

Regular maintenance ensures the longevity and optimal performance of your robotic arm kit:

• Zkontrolujte spojovací prvky: Periodically inspect all screws and nuts to ensure they are tight. Loose fasteners can affect stability and precision.
• Čistota: Keep the arm free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquids directly on electronic components.
• Mazání: If any joints feel stiff over time, a small amount of appropriate lubricant can be applied to moving metal parts, avoiding contact with servo gears.
• Správa kabelů: Ensure all wires are neatly routed and secured to prevent snagging or damage during movement.

7. Řešení problémů

If you encounter issues with your diymore ROT3U Robotic Arm, consider the following:

• Arm Not Moving:
  • Check power supply to the control board and servos.
  • Verify all servo connections are secure and correctly wired to the control board.
  • Review your code for any errors or incorrect servo commands.
• Jerky or Inaccurate Movement:
  • Ensure the power supply provides sufficient current for all servos, especially under load.
  • Check for any mechanical obstructions or loose joints.
  • Recalibrate servos if their range of motion seems off.
  • Consider using higher torque servos (e.g., MG996R) for joints experiencing significant load.
• Chybějící části: If you believe parts are missing from your kit, please contact diymore customer support immediately.

For programming assistance or complex issues, consult online robotics communities or the documentation for your specific control board and programming language.

8. Specifikace

Image: Diagram showing the key dimensions of the assembled robotic arm, including height, arm length, and claw width.

9. Záruka a podpora

For information regarding warranty coverage, returns, or technical support for your diymore ROT3U Robotic Arm Kit, please contact diymore customer service directly through their official channels or the platform where the product was purchased.