1. Úvod
This manual provides detailed instructions for the safe and proper installation and operation of your RICOO S2544 Universal Full Motion TV Wall Mount. Please read all instructions carefully before beginning installation to ensure correct setup and to prevent damage or injury.
The RICOO S2544 wall mount is designed for televisions with screen sizes between 32 and 60 inches, supporting VESA mounting patterns from 200x200mm up to 400x400mm, and a maximum weight capacity of 45 kg (99 lbs). It offers full motion capabilities including swivel, tilt, and rotation for optimal viewing úhly.
Důležité: Před nákupemasing and installing, verify the VESA mounting pattern (distance between threaded holes) and weight of your television. The mount is compatible only if your TV's VESA pattern falls within the supported range and its weight does not exceed 45 kg.
2. Bezpečnostní informace
Failure to follow these safety instructions can result in property damage, serious injury, or death. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified professional.
- Nosnost: Do not exceed the maximum weight capacity of 45 kg (99 lbs). Overloading can cause instability and potential failure.
- Konstrukce stěny: Ensure the mounting surface can safely support the combined weight of the mount and your television. For concrete walls, use the provided concrete anchors. For wood stud walls, ensure the mount is secured into the center of the studs. Do not install on drywall alone.
- Nástroje: K instalaci používejte vhodné nářadí. Elektrické nářadí by mělo být používáno s opatrností.
- Shromáždění: Assemble the product according to the instructions. Incorrect assembly may result in accidents or damage.
- Děti: Keep children away from the assembly area. Small parts may be a choking hazard.
- Údržba: Pravidelně kontrolujte, zda je držák bezpečně upevněn a zda jsou všechny upevňovací prvky pevně utažené.
3. Obsah balení
Carefully unpack the box and ensure all parts are present and undamaged. If any parts are missing or defective, do not attempt to install. Contact customer service for assistance.
- Pre-assembled TV wall mount unit
- Concrete anchors (for concrete walls only)
- Various screws for TV attachment
- Wall mounting screws and accessories
- Integrovaná vodováha
Obrázek 3.1: Nadview of the RICOO S2544 TV wall mount and all included mounting hardware, including various screws, washers, spacers, and a spirit level.
4. Specifikace
| Funkce | Specifikace |
|---|---|
| Číslo modelu | S2544 |
| Značka | RICOO |
| Materiál | Legovaná ocel |
| Barva | Černý |
| Kompatibilní velikosti obrazovky | 32 - 60 palce (81 - 152 cm) |
| Maximální nosnost | 45 kg (99 lb) |
| Kompatibilita VESA | 200x200, 300x200, 300x300, 400x200, 400x400 mm |
| Úhel náklonu | +/- 15 stupňů |
| Úhel otočení | Up to 180 degrees (depending on TV width) |
| Otočení obrazovky | +/- 6 stupňů |
| Vzdálenost od zdi | 80 mm (min) - 500 mm (max) |
Obrázek 4.1: Compatible screen sizes (32-60 inches) and VESA mounting patterns supported by the S2544 mount.
Obrázek 4.2: The mount supports a maximum TV weight of 45 kg.
Obrázek 4.3: Detailed technical drawing illustrating the dimensions, wall distance, and angular adjustments of the S2544 mount.
5. Nastavení a instalace
Before installation, ensure you have all necessary tools (e.g., drill, stud finder, screwdriver, level) and that the wall structure is suitable for mounting. It is recommended to have two people for installation.
5.1. Připevnění držáků k televizoru
- Opatrně položte televizor displejem dolů na měkký, čistý povrch, abyste zabránili poškození obrazovky.
- Identifikujte montážní otvory VESA na zadní straně televizoru.
- Select the appropriate screws, washers, and spacers from the provided hardware kit that fit your TV's VESA holes.
- Attach the vertical TV brackets to the back of your TV using the selected hardware. Ensure they are securely fastened but do not overtighten.
5.2. Montáž nástěnné desky
- Determine the desired height and position for your TV on the wall.
- Use a stud finder to locate wood studs if mounting on a wood stud wall. Mark the center of the studs. If mounting on a concrete wall, mark the desired drill points.
- Hold the wall plate against the wall at the marked position and use the integrated spirit level to ensure it is perfectly horizontal. Mark the drill holes.
- Drill pilot holes at the marked locations. For wood studs, drill appropriate size holes. For concrete walls, drill holes and insert the provided concrete anchors flush with the wall surface.
- Attach the wall plate to the wall using the wall mounting screws. Tighten all screws firmly.
5.3. Zavěšení televizoru
- S pomocí opatrně zvedněte televizor pomocí připojených konzolí.
- Zavěste držáky televizoru na nástěnnou desku. Ujistěte se, že je televizor bezpečně upevněn na držáku.
- Engage any safety locking mechanisms on the brackets to prevent accidental dislodging.
Obrázek 5.1: Illustration of the TV being carefully lifted and attached to the wall mount's arm assembly.
6. Obsluha a seřízení
The RICOO S2544 mount offers various adjustments to achieve your desired viewúhel.
6.1. Nastavení otočení
The mount allows for a swivel of up to 180 degrees (90 degrees left and 90 degrees right), depending on the width of your television and its distance from the wall. Gently push or pull the TV to the desired angle.
Obrázek 6.1: The TV can be swiveled up to 90 degrees in either direction from the wall.
6.2. Nastavení sklonu
The TV can be tilted +/- 15 degrees (15 degrees up and 15 degrees down) to reduce glare or optimize viewing from different heights. Loosen the tilt adjustment knobs/screws, set the desired angle, and then re-tighten to secure the position.
Obrázek 6.2: The TV can be tilted up or down by 15 degrees for optimal viewIng.
6.3. Screen Rotation (Level Adjustment)
The front panel allows for a rotation of +/- 6 degrees, enabling you to fine-tune the TV's level after installation. Loosen the rotation screws, adjust the level, and then re-tighten.
Obrázek 6.3: The TV screen can be rotated by 6 degrees to correct for minor leveling issues.
6.4. Wall Distance Adjustment
The articulating arm allows the TV to be positioned at a distance of 80mm (minimum) to 500mm (maximum) from the wall. Extend or retract the arm as needed.
Obrázek 6.4: The mount allows for flexible adjustment of the TV's distance from the wall, ranging from 80mm to 500mm.
7. Údržba
- Čištění: Držák čistěte měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Pravidelné kontroly: Regularly check all screws and connections to ensure they remain tight and secure. Over time, vibrations or movement can cause fasteners to loosen.
- Pohyblivé části: The articulating arm and joints are designed for smooth movement. If movement becomes stiff, check for any obstructions or debris. Do not apply lubricants unless specifically instructed by the manufacturer.
8. Řešení problémů
- Televizor není vodorovně umístěn: Use the screen rotation adjustment (+/- 6 degrees) to fine-tune the level. Ensure all screws are tightened after adjustment.
- Obtíže s přemisťováním televizoru: Check if any cables are snagged or if the tilt/rotation screws are overtightened. Loosen slightly if necessary, adjust, then re-tighten.
- Držák se zdá být nestabilní: Immediately remove the TV from the mount. Re-check all wall mounting screws and TV attachment screws for tightness. Ensure the wall structure is appropriate and that the mount is properly secured into studs or concrete anchors. Do not re-mount the TV until stability is confirmed.
- Chybějící části: If any parts were missing upon unboxing, do not proceed with installation. Contact RICOO customer support for replacement parts.
9. Záruka a podpora
For warranty information, please refer to the documentation included with your product or visit the official RICOO website. If you require technical assistance or have questions regarding your RICOO S2544 TV wall mount, please contact RICOO customer support through their official channels.
