1. Úvod
The Behringer XENYX CONTROL2USB is a high-end studio control and communication center designed to provide comprehensive monitoring and communication solutions for professional recording environments. This device integrates VCA control for precise volume adjustments and a USB audio interface for seamless computer integration. It serves as a central hub for managing multiple audio sources, monitor speakers, and communication with artists.
This manual provides detailed instructions for the setup, operation, and maintenance of your CONTROL2USB unit. Please read it thoroughly to ensure proper use and to maximize the performance and longevity of your device.
2. Bezpečnostní pokyny
Always follow basic safety precautions when using electrical equipment to reduce the risk of fire, electric shock, and injury to persons. Keep these instructions for future reference.
- Zdroj napájení: Připojte jednotku pouze k síťovému napětítage uvedeno na zařízení.
- Základy: Ensure the power cord is properly grounded. Do not defeat the safety purpose of the polarized or grounding-type plug.
- Voda a vlhkost: Nevystavujte tento spotřebič dešti ani vlhkosti. Nepoužívejte jej v blízkosti vody.
- Větrání: Zajistěte dostatečné větrání. Neblokujte žádné větrací otvory.
- Teplo: Neinstalujte v blízkosti zdrojů tepla, jako jsou radiátory, tepelné regulátory, kamna nebo jiná zařízení (včetně amplifikátory), které produkují teplo.
- Kabely: Chraňte napájecí kabel před šlapáním nebo přiskřípnutím, zejména u zástrček, zásuvek a v místě, kde vychází z přístroje.
- Servis: Veškeré opravy svěřte kvalifikovanému servisnímu personálu. Servis je nutný, pokud bylo zařízení jakýmkoli způsobem poškozeno, například je poškozen napájecí kabel nebo zástrčka, pokud do zařízení vnikla tekutina nebo do něj spadly předměty, zařízení bylo vystaveno dešti nebo vlhkosti, nefunguje normálně. , nebo byla vypuštěna.
3. Funkce Overview
The CONTROL2USB offers a comprehensive set of features designed to streamline your studio workflow:
- Univerzální ovladač hlasitosti, volič zdroje, přepínač monitorů a talkback box.
- Premium, ultra-low noise, and high headroom studio control and communication center.
- Integrated VCA (Voltage Řízené Amplifier) control for precise level adjustments.
- Built-in Talkback microphone with level control for direct communication with musicians.
- Multiple input sources (3 stereo analog inputs, 1 USB input).
- Multiple monitor outputs (3 stereo monitor outputs).
- Dual headphone outputs with individual volume controls.
- USB audio interface for direct connection to a computer.
- Mono, Mute, and Dim functions for critical listening.
- High-precision dual 12-segment LED meters for input/output level monitoring.
Obrázek 3.1: Přední panel view of the Behringer XENYX CONTROL2USB, showing all controls and indicators.
4. Nastavení
4.1 Vybalení a kontrola
Carefully unpack your CONTROL2USB unit. Inspect the device for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately.
4.2 Fyzická připojení
The CONTROL2USB offers extensive connectivity options. Ensure all connections are made with high-quality, shielded cables to minimize noise and interference.
Figure 4.1: Rear panel connections of the CONTROL2USB, illustrating various input and output jacks.
- Vstupy: Connect your audio sources (e.g., audio interface, mixer, CD player) to the balanced XLR/TRS combo jacks or RCA inputs on the rear panel. The unit features three stereo analog inputs (Input 1, Input 2, Input 3/USB).
- Výstupy monitoru: Connect your active studio monitors to the balanced XLR outputs labeled 'Monitor A', 'Monitor B', and 'Monitor C'.
- Studio Out: Use the 'Studio Out' for sending a separate mix to a recording device or another monitoring system.
- Sluchátkové výstupy: Two 1/4" TRS headphone jacks are located on the front panel for convenient monitoring.
- Talkback Footswitch: An optional footswitch can be connected to the rear panel for hands-free talkback activation.
4.3 Připojení USB
Connect the CONTROL2USB to your computer using a standard USB cable. The unit will function as a 2-in/2-out USB audio interface. Drivers for Windows operating systems may be required and can be downloaded from the Behringer website. macOS typically provides native support.
Figure 4.2: Illustration of the USB interface and connection port.
4.4 Připojení napájení
Connect the supplied power adapter to the DC input on the rear panel of the CONTROL2USB, then plug it into a suitable AC outlet. Ensure the power switch is in the 'OFF' position before connecting the power adapter.
5. Návod k obsluze
5.1 Hlavní ovládání hlasitosti
The large 'Volume' knob on the front panel controls the overall output level to your selected monitor speakers. This knob utilizes VCA technology for precise and transparent level attenuation.
Figure 5.1: Detail of the main VCA volume control knob.
5.2 Výběr zdroje
Use the 'Source Select' buttons (1, 2, 3/USB) to choose which input source is routed to your monitor speakers and headphones. Only one source can be active at a time.
5.3 Výběr monitoru
The 'Monitor Select' buttons (A, B, C) allow you to switch between up to three pairs of studio monitors. This enables critical listening across different speaker types.
5.4 Headphone Outputs
The CONTROL2USB features two independent headphone outputs, each with its own volume control. The 'Phones / Studio' switch determines whether the headphones monitor the selected source or the 'Studio Out' signal.
Figure 5.2: A user monitoring audio through headphones connected to the CONTROL2USB.
5.5 Funkce zpětného hovoru
The built-in talkback microphone allows you to communicate with musicians in a separate recording booth. Adjust the talkback microphone level using the 'Talkback Mic' knob. The 'To 2-Track' and 'To Phones/Studio' buttons route the talkback signal to the respective outputs.
Obrázek 5.3: Detailní view of the talkback section, including the microphone and routing buttons.
5.6 Funkce Mono, Mute a Dim
- Mono: Engages mono summing for checking phase compatibility and mono playback.
- Ztlumit: Silences all monitor outputs.
- Ztlumit: Reduces the monitor output level by a fixed amount (typically 20dB) for temporary level reduction without losing the mix balance.
5.7 Měření
The dual 12-segment LED meters provide visual feedback on your audio levels. The 'Meter In/Out' button switches the metering display between input and output signals.
6. Údržba
The Behringer XENYX CONTROL2USB requires minimal maintenance. Follow these guidelines to ensure its longevity:
- Čištění: K čištění vnější strany jednotky používejte měkký, suchý hadřík. Nepoužívejte tekuté čisticí prostředky ani rozpouštědla.
- Prach: Keep the unit free from dust. Regular dusting can prevent internal component issues.
- Prostředí: Operate the unit in a clean, dry environment away from extreme temperatures and direct sunlight.
- Větrání: Ensure ventilation openings are not obstructed to prevent overheating.
7. Řešení problémů
If you encounter issues with your CONTROL2USB, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný audio výstup | Incorrect source selected, monitor speakers off, cables disconnected, volume too low. | Verify source selection, check monitor power and connections, increase volume. |
| Zkreslený zvuk | Input level too high, output level too high, faulty cables. | Reduce input/output levels, check cables for damage. |
| No USB audio | USB cable disconnected, incorrect driver installed, computer not recognizing device. | Reconnect USB cable, install correct drivers from Behringer website, check computer's audio settings. |
| Talkback not working | Talkback mic level too low, talkback not routed to desired output. | Increase talkback mic level, ensure 'To 2-Track' or 'To Phones/Studio' is engaged. |
Pokud problém přetrvává i po vyzkoušení těchto řešení, kontaktujte zákaznickou podporu Behringer nebo kvalifikovaného servisního technika.
8. Specifikace
The following are the technical specifications for the Behringer XENYX CONTROL2USB:
- Hmotnost položky: 5.29 libry (2.4 kg)
- Rozměry produktu: 7.8 x 15.31 x 3.43 palce (19.8 x 38.9 x 8.7 cm)
- Číslo modelu: CONTROL2USB
- Barva: Černý
- Kompatibilní zařízení: Osobní počítač
- Hardwarové rozhraní: USB
- Operační systém: Windows (macOS compatible)
- Wattage: 15 wattů
- Technologie připojení: USB
- Počet kanálů: 3 (stereo inputs)
9. Záruka a podpora
Behringer products are designed and manufactured to the highest quality standards. For detailed warranty information and support, please refer to the warranty card included with your product or visit the official Behringer website. Technical support and service centers are available globally to assist you with any product-related inquiries or issues.
For the latest drivers, software, and product documentation, please visit: www.behringer.com
