JBL CLUB704

JBL CLUB-704 4kanálový AmpNávod k použití lifikátoru

Model: CLUB704 Značka: JBL

Zavedení

The JBL CLUB-704 is a powerful 4-channel amplifier designed to enhance your car audio system. Delivering 1000W peak power and 400W RMS, this amplifier provides clear and dynamic sound for your speakers. Its slim chassis allows for flexible mounting options, making it suitable for various vehicle installations. This manual provides essential information for proper installation, operation, and maintenance of your ampživější.

Co je v krabici

  • JBL CLUB-704 4kanálový AmpLifikační jednotka
  • High-level input adapters
  • Mounting hardware (screws, zip ties)
  • Návod k obsluze

Nastavení a instalace

Správná instalace je klíčová pro optimální výkon a bezpečnost. Doporučuje se mít toto ampnainstalovaný kvalifikovaným odborníkem.

1. Montáž Ampdoživotní

Choose a mounting location that is dry, well-ventilated, and protected from direct sunlight or excessive heat. Ensure sufficient space around the amplifier for air circulation. Use the provided mounting hardware to secure the amppevně zatlačte na záchranář.

2. Připojení vodičů

Ensure the vehicle's battery is disconnected before making any electrical connections.

  • Připojení napájení (+12V): Connect a suitable gauge power cable from the vehicle's positive battery terminal to the +12V terminal on the amplifier. An in-line fuse (not supplied) should be installed within 18 inches (45 cm) of the battery.
  • Zemní připojení (GND): Connect a short, heavy-gauge ground cable from the GND terminal on the amplifier to a clean, unpainted metal surface on the vehicle's chassis.
  • Dálkové zapnutí (REM): Připojte kabel dálkového zapnutí z výstupu dálkového ovládání hlavní jednotky ke svorce REM na amplifier. If your head unit does not have a remote output, the amplifier features an auto-sense turn-on mode (DC offset or Audio Sense) which can be selected.
  • Připojení reproduktorů: Připojte reproduktory k amplifier's speaker output terminals. Observe correct polarity (+ to + and - to -). The amplifier supports 4-channel stereo or 2-channel bridged configurations.
  • Input Connections (RCA or High-Level): Připojte RCA výstupy vaší hlavní jednotky k amplifier's RCA input jacks. If your head unit lacks RCA outputs, use the supplied high-level input adapters to connect to your head unit's speaker outputs.
Zadní view of JBL CLUB-704 amplifier showing power, ground, remote, speaker, and RCA input terminals.

Obrázek 1: Zadní view of the JBL CLUB-704 amplifier, illustrating the power, ground, remote, speaker, and RCA input terminals. Note the dual 30A fuses for protection.

Provozní ovládací prvky

The JBL CLUB-704 amplifier features various controls to fine-tune your audio experience. These controls are typically located under a removable panel for protection and a clean aesthetic.

Close-up of JBL CLUB-704 amplifier controls including gain, crossover, bass boost, phase, and turn-on mode switches.

Obrázek 2: Detail view z amplifier's control panel, showing adjustable settings for gain, crossover frequency (HPF/LPF/FULL), bass boost, phase, and turn-on mode.

  • Input Level (HI/LO): Selects between high-level (speaker-level) or low-level (RCA) input signals.
  • Ovládání zesílení (MIN/MAX): Nastavuje vstupní citlivost amplifier to match the output of your head unit. Start with minimum gain and slowly increase until desired volume is achieved without distortion.
  • Crossover (X-OVER - HPF/LPF/FULL): Selects the type of filter for the output.
    • HPF (High-Pass Filter): Allows frequencies above the set point to pass through, ideal for full-range speakers.
    • LPF (dolní propust): Allows frequencies below the set point to pass through, ideal for subwoofers.
    • PLNÝ: Allows all frequencies to pass through, bypassing the crossover.
  • Frekvence (FREQ): Adjusts the cutoff frequency for the HPF or LPF, typically ranging from 32Hz to 320Hz.
  • Bass Boost (0dB/12dB): Provides an adjustable bass boost at 45Hz to enhance low-frequency output.
  • Fáze (0°/180°): Adjusts the phase of the output signal, useful for optimizing bass response with subwoofers.
  • Turn-On Mode (DC/REM): Selects how the amplifikátor se zapne.
    • DC: Detects a DC offset on the high-level inputs to turn on the ampživější.
    • REM: Uses a dedicated remote turn-on wire from the head unit.

Údržba

To ensure long-lasting performance from your JBL CLUB-704 ampzáchranáře, dodržujte tyto jednoduché pokyny pro údržbu:

  • Čištění: Pravidelně otírejte amplifier's exterior with a soft, dry cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners.
  • Větrání: Ujistěte se, že ampChladicí žebra zhášeče tepla jsou bez překážek, aby se zajistil správný odvod tepla.
  • Spojení: Pravidelně kontrolujte všechna zapojení, abyste se ujistili, že jsou bezpečná a bez koroze. Volná spojení mohou vést ke špatnému výkonu nebo poškození.
  • Výměna pojistky: If a fuse blows, replace it only with a fuse of the same type and rating (30A). Using an incorrect fuse can damage the ampzažehnout nebo způsobit požár.

Odstraňování problémů

Pokud máte problémy s vaším amplifier, refer to the following common troubleshooting steps before contacting support:

  • Bez napájení: Check the power, ground, and remote turn-on connections. Verify the in-line fuse near the battery and the fuses on the amplifier. Ensure the vehicle's battery has sufficient charge.
  • Žádný zvuk: Check all RCA or high-level input connections. Verify speaker wiring for correct polarity and secure connections. Ensure the head unit is powered on and sending an audio signal. Adjust gain settings.
  • Zkreslený zvuk: Snižte nastavení zesílení na amplifier. Check for proper impedance matching with your speakers. Ensure speaker wires are not shorted.
  • AmpPřehřátí zařízení Lifier: Zajistěte amplifier has adequate ventilation and is not covered. Check speaker impedance to ensure it is within the ampjmenovité limity záchranáře.
  • Protection Light On (PWR/PROT): If the protection light is illuminated, the amplifier has detected an issue (e.g., short circuit, overheating, low voltage). Disconnect power, check all wiring, and allow the unit to cool down before reconnecting.

Specifikace

Funkce Detail
Číslo modelu CLUB704
RMS Power (4 ohms) 70 wattů x 4 kanály
RMS Power (2 ohms) 100 wattů x 4 kanály
RMS Power (Bridged 4 ohms) 200 wattů x 2 kanály
Špičkový výkon 1000 wattů
Rozměry produktu 12.01 x 9.02 x 4.02 palce
Hmotnost položky 0.141 unce
Výrobce JBL
Datum první dostupnosti 23. července 2016

Záruka a podpora

Pro informace o záruce, technickou podporu nebo servisní dotazy se prosím obraťte na oficiálního prodejce JBL. webnebo se obraťte na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi pro případ reklamace.

Můžete navštívit JBL Store na Amazonu pro více informací o produktu a zdroje podpory.

Související dokumenty - CLUB704

Předview JBL Club Series Amplifiers Owner's Manual: Club-704, Club-4505, Club-5501
This owner's manual provides detailed instructions for installing, operating, and troubleshooting JBL Club Series amplifiers, including models Club-704, Club-4505, and Club-5501. It covers wiring diagrams, specifications, and setup procedures.
Předview JBL Club 422F 4" 2pásmový reproduktor do auta - instalační manuál
Instalační manuál pro 4palcový 2pásmový reproduktor do auta JBL Club 422F, včetně specifikací, rozměrů a instalačních schémat.
Předview Instalační manuál reproduktorů do auta JBL Club Series
Komplexní instalační manuál pro reproduktory do auta JBL řady Club, zahrnující modely jako Club 34F, Club 44F, Club 54F a další. Obsahuje podrobné specifikace a pokyny k instalaci.
Předview JBL Club A754 a Club A5055 Ampuživatelská příručka lifiers
Komplexní uživatelská příručka pro JBL Club A754 a Club A5055 ampzáchranné složky, zahrnující instalaci, zapojení, nastavení a řešení problémů.
Předview Návod k instalaci lodních reproduktorů JBL Club 6.5", 8", 10" a 12"
Komplexní instalační průvodce pro lodní reproduktory JBL Club Series o rozměrech 6.5", 8", 10" a 12". Zjistěte více o obsahu balení, rozměrech, zapojení signálů a LED diod, montážních postupech, možnostech krytu a podrobných technických specifikacích pro optimální výkon.
Předview JBL GTO3501 1kanálový výkon AmpNávod k obsluze čističky
Komplexní servisní manuál pro JBL GTO3501 1kanálový výkonový reproduktor Ampzáchranný pás, specifikace krytu, pokyny k instalaci, průvodce odstraňováním problémů, podrobné seznamy dílů, rozložené views, bloková schémata, rozvržení desek plošných spojů, zapojení pinů polovodičů a schémata.