VIPERTEK VTS-979 Stun Gun with Safety Disable Pin LED Flashlight User Manual

1. Důležité bezpečnostní informace

Read all instructions and warnings before using this product. Improper use can result in serious injury or property damage. This device is intended for self-defense purposes only and should be handled with extreme care.

• Uchovávejte mimo dosah dětí.
• Do not use on individuals with heart conditions, pacemakers, or pregnant women.
• Do not use in or near flammable liquids or gases.
• Do not immerse in water or expose to extreme temperatures.
• Check local laws and regulations regarding the possession and use of stun guns.

2. Konec produktuview

The VIPERTEK VTS-979 is a compact personal defense device featuring a stun gun, an LED flashlight, and a safety disable pin for enhanced security.

This image shows the VIPERTEK VTS-979 Stun Gun from the front, highlighting its compact design and the stun electrodes at the top.

Obsah balení:

• Paralyzér VIPERTEK VTS-979
• USB nabíjecí kabel
• Safety Disable Pin Lanyard

3. Nastavení

3.1 Počáteční nabíjení

Before first use, fully charge the device. The VTS-979 features a USB rechargeable battery.

1. Locate the USB charging port on the side of the stun gun.
2. Connect the provided USB charging cable to the stun gun's port.
3. Plug the other end of the USB cable into any standard USB power source (e.g., computer USB port, USB wall adapter).
4. Allow the device to charge until the charging indicator light (if present) indicates a full charge, or for approximately 8 hours for the initial charge.

The stun gun is shown connected via its USB charging cable to a wall adapter, indicating the charging process.

3.2 Attaching the Safety Disable Pin Lanyard

The safety disable pin is a critical safety feature that prevents the stun gun from operating if it is taken from you.

1. Locate the small metal pin at the bottom of the stun gun.
2. Attach the lanyard loop to this pin.
3. When using the stun gun, loop the lanyard around your wrist. If the stun gun is pulled away from you, the pin will detach, rendering the device inoperable.

This image demonstrates how to hold the stun gun, with the safety disable pin lanyard attached to the wrist for secure operation.

4. Návod k obsluze

Familiarize yourself with the controls before needing to use the device in an emergency.

Strana view of the stun gun, illustrating the ON/OFF switch, activation button, and the USB charging port.

4.1 Activating the Stun Function

1. Ensure the safety disable pin lanyard is securely attached to the device and your wrist.
2. Slide the ON/OFF switch to the 'ON' position. This typically arms the device.
3. Press and hold the activation button (often a larger, more prominent button) to discharge the stun function. The electrodes at the top of the device will emit an electrical arc.
4. To deactivate, release the activation button and slide the ON/OFF switch to the 'OFF' position.

Poznámka: A brief test discharge in a safe environment can help you understand the device's operation. The sound of the discharge can also serve as a deterrent.

4.2 Používání LED svítilny

1. Posuňte vypínač ZAP/VYP do polohy „ZAP“.
2. Press the dedicated flashlight button (if separate from the stun activation button, or a partial slide of the main switch) to turn on the LED flashlight.
3. Press the flashlight button again to turn it off.
4. To conserve battery, always turn the flashlight off when not in use and slide the main switch to 'OFF'.

5. Údržba

5.1 Nabíjení baterie

Regularly recharge the stun gun to ensure it is ready for use. It is recommended to charge the device once every 30-60 days, even if not used, to maintain battery health.

• Follow the charging steps outlined in Section 3.1.
• Do not overcharge the device; disconnect once fully charged.

5.2 Čištění a skladování

• Clean the exterior of the stun gun with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Přístroj skladujte na chladném a suchém místě, mimo dosah přímého slunečního záření a extrémních teplot.
• Ensure the device is in the 'OFF' position during storage.

6. Řešení problémů

6.1 Device Not Activating

• Ensure the safety disable pin is fully inserted. The device will not operate without it.
• Zkontrolujte, zda je vypínač ZAP/VYP v poloze „ZAPNUTO“.
• Verify the battery is charged. Recharge if necessary.

6.2 Svítilna nefunguje

• Ujistěte se, že je vypínač v poloze „ON“ (ZAPNUTO).
• Verify the battery is charged. Recharge if necessary.

6.3 Problémy s nabíjením

• Ensure the USB cable is securely connected to both the stun gun and the power source.
• Zkuste jiný USB port nebo síťový adaptér, abyste vyloučili vadný zdroj napájení.
• Zkontrolujte nabíjecí kabel, zda není poškozen.

7. Specifikace

An illustration detailing the length (6.5 inches) and width (2 inches) of the stun gun.

8. Informace o záruce

All VIPERTEK stun guns, including the VTS-979, are backed by a Limited Lifetime Warranty. This warranty covers defects in materials and workmanship under normal use.

For warranty claims or further details, please refer to the manufacturer's official webnebo kontaktujte jejich zákaznickou podporu.

9. Podpora

If you have questions or require assistance with your VIPERTEK VTS-979 Stun Gun, please visit the official VIPERTEK webweb s zdrojovými zdroji podpory, častými dotazy a kontaktními informacemi.

Always ensure you are following local laws and regulations regarding the use and possession of personal defense devices.