Uživatelská příručka k bezkartáčovému regulátoru Amewi 28127 80A

Zavedení

This manual provides detailed instructions for the Amewi 28127 Brushless 80A Electronic Speed Controller (ESC). This high-performance ESC is designed for 1:10 scale models and supports both sensored and sensorless brushless motors. It features a robust, waterproof design and offers extensive programmability for optimal performance.

Klíčové vlastnosti

• 80A continuous current for 1:10 scale applications.
• Compatible with both sensored and sensorless brushless motors.
• Voděodolné provedení pro zvýšenou odolnost.
• Fully programmable via a dedicated programming card (sold separately).
• Integrovaný nízký objemtage ochrana.
• Overheat protection for reliable operation.
• Compatible with motors from various brands, including Amewi, LRP, Novak, and Orion.

Nastavení a instalace

Proper installation of the ESC is crucial for safe and efficient operation. Follow these steps carefully:

Připojení vodičů

• Připojení motoru: Connect the three motor wires from the ESC to the corresponding motor terminals. For sensorless motors, the order typically does not matter, but for sensored motors, ensure correct phase matching.
• Připojení baterie: Connect the ESC's power input wires (red for positive, black for negative) to your battery pack. Ensure correct polarity to prevent damage.
• Připojení přijímače: Plug the ESC's signal cable into the throttle channel (usually channel 2) of your receiver.
• Chladicí ventilátor: If applicable, ensure the cooling fan is securely attached and connected to the designated port on the ESC.

Image: The Amewi 28127 Brushless 80A ESC showing its power input, motor output, and receiver signal wires. The three thick wires (yellow, blue, orange) connect to the motor, while the red and black wires connect to the battery. A smaller black and white wire connects to the receiver.

Počáteční kalibrace

After connecting all components, calibrate the ESC with your radio system:

• Turn on your radio transmitter and ensure the throttle trim is centered and throttle endpoints are set to 100%.
• Hold the ESC's setup button (if present) or follow the specific power-on sequence while holding full throttle on your transmitter.
• Listen for confirmation beeps, then move the throttle to full brake/reverse.
• Finally, move the throttle to the neutral position. The ESC should emit a final set of beeps, indicating successful calibration.

Návod k obsluze

Once installed and calibrated, the ESC is ready for operation. Always ensure your battery is fully charged and all connections are secure before use.

• Zapnutí: Turn on your radio transmitter first, then connect the battery to the ESC.
• Vypnout: Nejprve odpojte baterii od ESC a poté vypněte rádiový vysílač.
• Ovládání škrticí klapky: Use your transmitter's throttle stick to control motor speed and direction.
• Bezpečnostní kontrola: Before each use, perform a quick check of all connections and ensure the motor spins freely.

Programování ESC

The Amewi 28127 ESC is fully programmable using a dedicated programming card (not included). This allows for fine-tuning of various parameters to match your specific motor, battery, and driving style. Refer to the programming card's manual for detailed instructions on its use.

Programovatelné parametry:

• Cut-off Voltage: Nastavuje voltage at which the ESC reduces or cuts power to protect the battery.
• Provozní režim: Configures forward/brake, forward/reverse/brake, or other modes.
• Časování motoru: Adjusts motor timing for efficiency or power.
• Initial Acceleration: Controls the initial punch or softness of acceleration.
• Procento plynu zpět: Sets the maximum reverse throttle percentage.
• Limit plynu: Limits the maximum forward throttle output.
• Punch Brake: Adjusts the initial braking force.
• Procenttage Drag Brake: Sets the amount of automatic braking when the throttle is neutral.
• Rotace motoru: Reverses motor direction if needed.
• Neutrální rozsah: Defines the width of the neutral throttle band.

Image: The Amewi 28127 Brushless 80A ESC displayed alongside its product packaging and a user manual. This setup suggests the presence of a programming card or instructions for programming within the manual.

Údržba

Pravidelná údržba zajišťuje dlouhou životnost a optimální výkon vašeho ESC:

• Čištění: Periodically clean the ESC to remove dirt, dust, and debris. Use a soft brush or compressed air. Ensure no moisture enters the unit, despite its waterproof rating.
• Inspekce: Pravidelně kontrolujte všechny vodiče a konektory, zda nevykazují známky opotřebení, roztřepení nebo koroze. Poškozené součásti ihned vyměňte.
• Chlazení: Ensure the cooling fan (if present) is free from obstructions and operating correctly. Overheating can severely damage the ESC.
• Skladování: Skladujte ESC na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.

Odstraňování problémů

If you encounter issues with your Amewi 28127 ESC, refer to the following common problems and solutions:

• Bez napájení: Check battery connection, battery charge level, and ESC power switch. Ensure all connectors are secure.
• Motor nereaguje: Verify ESC-to-receiver connection, radio calibration, and motor wire connections. Check if the motor is seized or damaged.
• Motor Stutters/Runs Irregularly: This can indicate incorrect motor timing, a loose motor wire connection, or a damaged motor/ESC. Recheck connections and programming.
• Přehřátí ESC: Ensure adequate airflow to the ESC. Check for excessive load on the motor or incorrect gear ratio. Reduce motor timing if necessary.
• Nízký objemtage Cut-off Activating Prematurely: Check battery health and charge level. Adjust the low voltage cut-off setting if it's too high for your battery type.

Specifikace

Image: The Amewi 28127 Brushless 80A ESC securely placed within a custom-fit foam tray inside its product box, indicating careful packaging.

Bezpečnostní informace

Always observe general safety precautions when operating RC electronic components. While no specific safety warnings were provided in the product description, users should always:

• Zajistěte správné větrání, aby nedošlo k přehřátí.
• Avoid contact with rotating parts of the motor.
• Use appropriate battery types and connectors.
• Keep away from water and moisture unless explicitly designed for such conditions.
• Supervise children when operating RC models.

Záruka a podpora

Information regarding specific warranty terms or direct support contacts for the Amewi 28127 ESC was not provided in the product details. For warranty claims or technical assistance, please refer to the retailer where the product was purchased or visit the official Amewi webweb s obecnými informacemi o podpoře.