Uživatelská příručka k dětské chůvičce VTech BM4200 Bear
Model: 47900
Zavedení
Děkuji za nákupasing the VTech BM4200 Bear Baby Monitor. This manual provides comprehensive instructions for setting up, operating, and maintaining your new baby monitor. Please read this manual thoroughly before use to ensure proper functionality and safety.
Důležité bezpečnostní informace
Při používání tohoto výrobku vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem a zranění osob, včetně následujících:
- Uchovávejte výrobek mimo dosah dětí.
- Do not place the baby unit or cords within reach of the baby.
- Use only the power adapters provided with the product.
- Nevystavujte výrobek vodě nebo vlhkosti.
- Do not install the product near any heat sources.
- Zajistěte řádné větrání kolem produktu.
Obsah balení
The VTech BM4200 package includes the following items:
- Parent Unit (x1)
- Baby Unit (Bear-shaped camera) (x1)
- Rechargeable Battery for Parent Unit (x1)
- Power Adapter for Parent Unit (x1)
- Power Adapter for Baby Unit (x1)
- Držák pro montáž na stěnu (x1)
- Screws and Wall Anchors (x2 each)
Figure 1: VTech BM4200 Package Contents
Konec produktuview
Rodičovská jednotka
The parent unit features a 4.3-inch color screen for clear video monitoring. It includes controls for volume, zoom, two-way talk, and menu navigation.
Figure 2: VTech BM4200 Parent Unit and Baby Unit
Dětská jednotka (kamera)
The baby unit is designed in a charming bear shape and houses the camera, microphone, speaker, and temperature sensor. It features automatic infrared night vision for clear viewza zhoršených světelných podmínek.
Figure 3: Close-up of the Bear-shaped Baby Unit
Nastavení
1. Nabíjení rodičovské jednotky
- Connect the small end of the parent unit power adapter to the DC IN jack on the side of the parent unit.
- Zapojte větší konec napájecího adaptéru do zásuvky ve zdi.
- The battery icon on the screen will indicate charging status. For optimal battery performance, charge the parent unit for at least 12 hours before initial use.
2. Umístění dětské jednotky
- Place the baby unit in the baby's room, at least 1 meter (3 feet) away from the baby.
- Ensure the baby unit is placed on a flat surface or securely mounted to a wall using the provided bracket.
- Adjust the camera angle manually to get the best view vašeho dítěte.
- Connect the baby unit power adapter to the DC IN jack on the back of the baby unit and plug it into a wall outlet.
3. Zapnutí
Once both units are connected to power, press and hold the MOC button on both the parent unit and baby unit to turn them on. The units will automatically link.
Návod k obsluze
Sledování vašeho dítěte
Once powered on and linked, the parent unit will display live video from the baby unit. The screen will show the room temperature detected by the baby unit.
Digitální zoom
Stiskněte tlačítko ZOOM button on the parent unit to digitally zoom in or out on the video feed.
Oboustranný rozhovor
To talk to your baby, press and hold the MLUVIT button on the parent unit. Speak clearly into the microphone. Release the button to hear your baby.
Ukolébavky
The baby unit has 5 pre-recorded lullabies. To play a lullaby, navigate to the Lullaby menu on the parent unit and select your desired tune. You can also stop playback from the parent unit.
Monitorování teploty
The baby unit continuously monitors the room temperature. The temperature reading is displayed on the parent unit's screen. You can set temperature alerts in the menu if the room temperature goes above or below a set range.
Režim ECO
The VTech BM4200 features an ECO mode to conserve power. When ECO mode is activated, the parent unit's screen turns off and audio transmission stops when no sound is detected from the baby unit. The system will reactivate automatically when sound is detected. This feature can be enabled or disabled in the parent unit's menu.
Údržba
Čištění
Výrobek očistěte mírně damp cloth. Do not use cleaning sprays or liquid cleaners. Ensure the product is dry before reconnecting to power.
Péče o baterie
To prolong battery life, fully charge the parent unit before first use. If you will not be using the product for an extended period, remove the battery from the parent unit.
Odstraňování problémů
| Problém | Řešení |
|---|---|
| No link between parent unit and baby unit. | Ensure both units are powered on and within range. Move the parent unit closer to the baby unit. Check for interference from other electronic devices. |
| No picture on parent unit. | Check if the baby unit is powered on. Ensure the parent unit battery is charged. The screen might be off in ECO mode; make a sound near the baby unit to activate. |
| Špatná kvalita zvuku nebo statický šum. | Move the parent unit closer to the baby unit. Adjust the volume. Relocate units away from other electronic devices that may cause interference. |
| Baterie rodičovské jednotky se rychle vybíjí. | Ensure the battery is fully charged before use. Consider using ECO mode to conserve power. Battery life naturally decreases over time. |
| Odečet teploty je nepřesný. | Ensure the baby unit is not placed near a heat source or in direct sunlight. Allow time for the sensor to adjust to the room temperature. |
Specifikace
- Číslo modelu: 47900
- Velikost obrazovky: 4.3 palců (10.9 cm)
- Technologie: Digital 2.4 GHz FHSS
- Rozsah: Up to 300m (open field), 50-60m (indoors)
- Zdroj napájení: AC adapter (included), Rechargeable Lithium-ion battery (parent unit)
- Speciální vlastnosti: Digital Zoom, Automatic Infrared Night Vision, Two-Way Talk, Lullabies, Temperature Sensor, ECO Mode
- Barva: Bílý
Záruka a podpora
VTech products are designed with quality and reliability in mind. For detailed warranty information or technical support, please refer to the warranty card included with your product or visit the official VTech webwebu. Uschovejte si účtenku jako doklad o koupi.
For further assistance, you may also contact VTech customer service through their official channels.
