1. Konec produktuview
The RC4WD Michelin X Force XZL + 14.00 R20 1.9 Scale Tire is a highly detailed replica tire designed for remote control vehicles. This tire is engineered to provide realistic appearance and performance for scale model enthusiasts. It features a non-directional tread pattern suitable for various terrains.
Image: A single Michelin X Force XZL + 14.00 R20 1.9 Scale Tire, showcasing its detailed tread pattern and sidewall markings. The tire is black with white lettering for the Michelin brand.
2. Nastavení a instalace
Proper installation of your scale tire is crucial for optimal performance and longevity. Follow these steps for mounting the tire onto a compatible 1.9-inch wheel rim.
2.1 Požadované nástroje a materiály
- Compatible 1.9-inch beadlock or glue-on wheel rims
- Tire foam inserts (if not pre-installed or included)
- Appropriate adhesive for glue-on rims (e.g., CA glue for RC tires)
- Small screwdriver or hex wrench (for beadlock wheels)
2.2 kroky instalace
- Prepare the Rim: Ensure your wheel rim is clean and free of debris. If using beadlock wheels, disassemble the outer rings.
- Insert Foam: Carefully insert the foam insert into the tire. Ensure it sits evenly within the tire carcass.
- Mount Tire to Rim:
- For Beadlock Wheels: Place one bead of the tire into the inner groove of the wheel. Position the outer bead and secure it with the beadlock ring and screws. Tighten screws evenly in a star pattern to ensure proper seating.
- For Glue-On Wheels: Apply a thin, even bead of tire adhesive to the rim's tire-mounting surface. Carefully press the tire bead onto the adhesive, ensuring a secure and even bond. Repeat for the other side. Allow sufficient drying time as per adhesive instructions.
- Kontrolovat: After mounting, visually inspect the tire to ensure it is seated correctly on the rim and there are no gaps or deformities.
3. Provozní pokyny
While these tires are designed for durability, proper operating practices can extend their lifespan and enhance your RC experience.
- Vhodnost terénu: The non-directional tread pattern is versatile, but extreme sharp objects or abrasive surfaces can cause premature wear or damage.
- Styl jízdy: Avoid excessive wheel spin on high-traction surfaces, as this can lead to accelerated tread wear.
- Rozložení hmotnosti: Ensure your RC vehicle's weight is evenly distributed to prevent uneven tire wear.
4. Údržba
Regular maintenance will help preserve the condition and performance of your scale tires.
- Čištění: After use, especially in dirty or muddy conditions, clean the tires with a soft brush and mild soap and water. Rinse thoroughly and allow to air dry completely.
- Inspekce: Periodically inspect the tires for cuts, tears, punctures, or excessive wear. Check the sidewalls and tread for any signs of damage.
- Skladování: Store tires in a cool, dry place away from direct sunlight and extreme temperatures. Prolonged exposure to UV light can degrade rubber compounds.
- Otáčení: Consider rotating your tires periodically to promote even wear, especially if you notice one tire wearing faster than others.
5. Řešení problémů
Zde jsou některé běžné problémy a jejich možná řešení:
- Tire Coming Off Rim (Beadlock):
Příčina: Screws not tightened sufficiently or unevenly; tire bead not seated correctly.
Řešení: Re-seat the tire bead and re-tighten the beadlock screws in a star pattern, ensuring even pressure.
- Tire Coming Off Rim (Glue-On):
Příčina: Insufficient adhesive; improper application; adhesive not fully cured.
Řešení: Clean off old adhesive, reapply fresh adhesive evenly, and allow adequate curing time before use.
- Nerovnoměrné opotřebení pneumatik:
Příčina: Uneven weight distribution on the vehicle; aggressive driving style; misaligned suspension components.
Řešení: Check vehicle balance, adjust driving habits, and inspect suspension for proper alignment.
6. Specifikace
Detailed specifications for the Michelin X Force XZL + 14.00 R20 1.9 Scale Tire (Z-P0066):
| Funkce | Detail |
|---|---|
| Značka | RC4WD |
| Číslo modelu | Z-P0066 |
| UPC | 639302585894 |
| Velikost ráfku | 1.9 Inches (compatible with 1.9" RC wheels) |
| Typ běhounu | Nesměrový |
| Hmotnost položky | 90.72 gramů (přibližně 3.2 unce) |
| Rozměry položky (D x Š x V) | Approx. 0.18 x 0.48 x 3.57 inches (packaging/flat dimensions) |
| ASIN | B01DMUZB5I |
| Datum první dostupnosti | 30. března 2016 |
7. Záruka a podpora
This product is subject to the return policy of the retailer from which it was purchased. Typically, a 30-day return period for refund or replacement is offered for new items.
For technical support, product inquiries, or assistance with specific issues not covered in this manual, please contact RC4WD customer service directly. Refer to the official RC4WD website for their latest contact information.
Poznámka: Damage resulting from improper installation, misuse, modification, or normal wear and tear is typically not covered under warranty.
