Hiland Fire Pit Burner Replacement Kit

1. Konec produktuview

The Hiland Fire Pit Burner Replacement Kit, Model DGH-BURNER, is a complete solution for your outdoor fire pit. This kit includes all necessary components for instant startup, featuring integrated ignition, a regulator, a thermocouple, a burner ring, and a burner pan. Constructed from durable stainless steel, it is designed for use with liquefied petroleum gas (propane) and provides up to 41,000 BTUs of heat output. This burner is specifically designed to fit Hiland models GSF-DGH and GSF-DGHSS.

Klíčové vlastnosti:

• Complete fire pit burner with all components necessary for instant start up
• Integrated ignition for easy lighting
• Odolná konstrukce z nerezové oceli
• Includes plastic control knob
• Thermocouple safety device for enhanced safety
• Regulator included for gas flow control
• Compatible with Hiland models GSF-DGH and GSF-DGHSS
• Power source type: Propane

2. Důležité bezpečnostní informace

Read and understand all safety warnings and instructions before installing or operating this fire pit burner. Failure to follow these instructions could result in fire, explosion, property damage, personal injury, or death.

• Zajistěte dostatečnou vzdálenost od hořlavých materiálů. Maintain a safe distance from walls, furniture, and other flammable objects.
• Use only approved fuel types. This unit is designed for Liquefied Petroleum Gas (Propane) only. Do not use natural gas or any other fuel.
• Follow all installation and maintenance instructions. Incorrect installation or maintenance can be dangerous.
• Keep the area well-ventilated. Never operate the fire pit in an enclosed space.
• Do not store or use the fire pit indoors. Tento výrobek je určen pouze pro venkovní použití.
• Regularly check for gas leaks. Use a soapy water solution to check all gas connections for bubbles, indicating a leak.
• Před nákupem si prosím ověřte místní zákonyasintento produkt. Regulations regarding outdoor fire pits vary by location.
• Keep children and pets away from the fire pit during operation.
• Nikdy nenechávejte zapálené ohniště bez dozoru.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny a nepoškozené.

• Stainless Steel Burner Pan
• Circular Burner Ring
• Integrated Ignition System
• Gas Regulator with Hose
• Thermocouple Safety Device
• Plastový ovládací knoflík

4. Pokyny k nastavení

4.1 Než začnete

• Ensure the fire pit area is clear of all combustible materials.
• Confirm that your existing fire pit table is compatible with the dimensions of this burner (20"D x 20"W x 4"H).
• Have appropriate tools ready (e.g., wrench for gas connections).
• Ensure the propane tank is full and in good condition.

4.2 kroky instalace

1. Prepare the Fire Pit: If replacing an old burner, ensure the gas supply is turned off at the source and disconnect the old burner. Carefully remove any existing fire media (lava rocks, glass) and the old burner unit.
2. Place the New Burner: Carefully lower the Hiland DGH-BURNER replacement kit into the designated opening in your fire pit table. Ensure it sits securely and is level.
3. Connect the Gas Line: Connect the provided gas regulator hose to your propane tank. Ensure all connections are hand-tight, then use a wrench to tighten them securely. Neutahujte příliš.
4. Secure Propane Tank: Place the propane tank in its designated compartment within the fire pit table (if applicable). Ensure the compartment door can close properly.
5. Proveďte zkoušku těsnosti: Before first use, or after any gas connection is made or disturbed, perform a leak test. Mix a solution of soapy water (50% soap, 50% water). With the propane tank valve open, apply the solution to all gas connections. If bubbles appear, there is a leak. Immediately turn off the gas, tighten the connection, and retest. Do not operate the fire pit if a leak is detected.
6. Add Fire Media: Once the burner is securely installed and leak-tested, you may add fire media (e.g., fire glass, lava rocks) around the burner ring. Ensure the ignition element and burner holes are not obstructed.

5. Návod k obsluze

5.1 Zapálení hořáku

1. Ensure the fire pit area is clear and safe.
2. Open the valve on your propane tank.
3. Turn the control knob on the fire pit burner to the 'ON' or 'LOW' position.
4. Press and hold the ignition button. You should hear a clicking sound. Keep holding the button until the burner ignites.
5. Once lit, continue to hold the ignition button for 10-15 seconds to allow the thermocouple to heat up and engage the safety valve. Release the button.
6. If the burner does not light within 5 seconds, turn the control knob to 'OFF', wait 5 minutes for gas to dissipate, and repeat the lighting procedure. If the integrated ignition fails, use a long-stem lighter to ignite the burner while holding the control knob in the 'ON' position.
7. Adjust the flame height using the control knob to your desired level.

5.2 Vypnutí hořáku

1. Turn the control knob on the fire pit burner to the 'OFF' position.
2. Close the valve on your propane tank.
3. Allow the burner and fire media to cool completely before covering or storing.

6. Údržba

Regular maintenance ensures the longevity and safe operation of your Hiland Fire Pit Burner.

• Čištění: Clean the burner and pan regularly with a soft cloth and mild soap. Avoid abrasive cleaners that could damage the stainless steel finish. Ensure all components are dry before use.
• Inspekce: Periodically inspect the gas hose and connections for any signs of wear, cracks, or damage. Check the burner holes for obstructions (e.g., debris, insect nests).
• Skladování: When not in use for extended periods, especially during inclement weather, cover the fire pit or store the burner in a dry, protected area. Disconnect the propane tank and store it upright in a well-ventilated outdoor space.
• Termočlánek: Ensure the thermocouple is clean and positioned correctly to sense the flame. A dirty or misaligned thermocouple can cause the flame to extinguish unexpectedly.

7. Řešení problémů

Běžné problémy a jejich řešení naleznete v tabulce níže.

8. Specifikace produktu

9. Záruka a zákaznická podpora

For warranty information, technical assistance, or to purchase replacement parts, please contact Hiland customer support. Keep your purchase receipt and model number (DGH-BURNER) readily available when contacting support.

Kontaktní informace lze obvykle nalézt na stránkách výrobce webmístě nebo na obalu produktu.