Uživatelská příručka k ovladači zavlažování interiéru Hunter X-Core XC601i-e se 6 stanicemi

Zavedení

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Hunter X-Core XC601i-e 6-Station Indoor Irrigation Controller. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance of your irrigation system.

Konec produktuview

The Hunter X-Core XC601i-e is an indoor irrigation controller designed to manage up to 6 irrigation stations. It features three independent programs (A, B, C) with multiple start times, allowing for flexible scheduling of watering cycles. The intuitive dial and button interface simplify programming and manual operation.

Obrázek 1: Front panel of the Hunter X-Core XC601i-e controller. It displays a digital screen at the top, control buttons (+, -, arrow keys, PRG) above the main dial, and a large central dial with various settings: System Off, Manual, Solar Sync, Seasonal Adjust, Date/Time, Start Times, Run Times, and Water Days. The Hunter logo is visible at the bottom.

Nastavení

1. Montáž regulátoru

1. Choose a suitable indoor location near a standard electrical outlet, protected from direct sunlight and extreme temperatures.
2. Use the provided mounting template or mark the two mounting holes on the wall.
3. Install two screws into the wall, leaving approximately 3mm of the screw head exposed.
4. Hang the controller on the screws using the keyhole slots on the back.

2. Zapojení regulátoru

Bezpečnostní opatření: Ensure the power supply is disconnected before performing any wiring.

• Připojení napájení: Connect the two wires from the external transformer to the two terminals labeled "24 VAC" on the controller's terminal strip.
• Zapojení ventilu:
  1. Connect one wire from each solenoid valve to a separate station terminal (1-6).
  2. Connect the common wire from all solenoid valves to the terminal labeled "COM".
• Spuštění hlavního ventilu/čerpadla (volitelné): If using a master valve or pump start relay, connect one wire to the terminal labeled "MV" and the other to the "COM" terminal.
• Sensor Wiring (Optional): If using a rain sensor or other weather sensor, connect the sensor wires to the two terminals labeled "SEN". Ensure the sensor bypass switch is set correctly.

3. Initial Power-Up and Basic Settings

1. Connect the transformer to a power outlet. The display should illuminate.
2. Nastavit datum/čas:
   • Otočte voličem na Datum/čas pozice.
   • Použijte + or - buttons to adjust the year, month, day, and time.
   • Použijte > button to move between settings.

Návod k obsluze

The X-Core controller uses a central dial for navigation and dedicated buttons for adjustments.

Pozice ovládacího voliče:

• Systém vypnutý: Turns off all automatic and manual watering.
• Manuální: Allows for manual operation of individual stations or programs.
• Datum/čas: Používá se k nastavení aktuálního data a času.
• Počáteční časy: Used to set the start times for programs A, B, and C.
• Časy běhu: Used to set the watering duration for each station within programs A, B, and C.
• Vodní dny: Used to select specific watering days or intervals for programs A, B, and C.
• Sezónní úprava: Adjusts all program run times by a percentage (e.g., 100% for normal, 50% for half).
• Solar Sync: (If equipped and enabled) Automatically adjusts watering based on local weather conditions.

Programming Automatic Watering:

The X-Core has three independent programs: A, B, and C. Each program can have up to four start times.

1. Vyberte program: Stiskněte tlačítko PRG tlačítko pro cyklické přepínání mezi programy A, B a C.
2. Nastavit časy zahájení:
   • Otočte voličem na Start Times.
   • Použití + or - to set the desired start time.
   • Stiskněte PRG or > to move to the next start time (up to four per program).
3. Nastavte doby běhu:
   • Otočte voličem na Run Times.
   • The display will show the program and station number. Use + or - to set the watering duration (in minutes) for each station.
   • Použití > to advance to the next station.
4. Nastavte dny vody:
   • Otočte voličem na Vodní dny.
   • Select watering days (e.g., Monday, Wednesday, Friday) or an interval (e.g., every 2 days) using the + or - tlačítka.
   • The > button can be used to cycle through day options.
5. Return to RUN: After programming, turn the dial to the BĚH position for automatic operation.

Ruční provoz:

1. Otočte voličem na Manuál.
2. Použijte > button to select the desired station or program.
3. Použití + or - to set the manual run time.
4. The selected station or program will begin watering immediately.
5. Chcete-li zastavit ruční zavlažování, otočte knoflík do polohy Systém vypnutý or BĚH.

Údržba

Výměna baterie:

The X-Core controller uses one AAA battery to maintain the time and program settings during power outages. It is recommended to replace the battery annually.

1. Locate the battery compartment on the back or side of the controller.
2. Open the compartment and remove the old AAA battery.
3. Vložte novou baterii AAA a dbejte na správnou polaritu.
4. Zavřete přihrádku na baterie.

Note: The controller requires AC power for valve operation. The battery only preserves settings.

Obecná péče:

• Udržujte ovladač čistý a bez prachu. K čištění používejte měkký, suchý hadřík.
• Ensure the controller is not exposed to moisture or extreme temperatures, as it is designed for indoor use.

Odstraňování problémů

Specifikace

• Model: XC601i-e
• stanice: 6
• programy: 3 nezávislé programy (A, B, C)
• Počáteční časy: Up to 4 per program
• Příkon: 230 VAC, 50/60 Hz (via external transformer)
• Výkon: 24 VAC, 1.0 A
• Baterie: 1 x AAA (for time and program backup)
• Rozměry (přibližně): 25.5 x 18.5 x 8 cm (Package dimensions, actual unit may vary slightly)
• Hmotnost (přibližně): 3 kg (Package weight, actual unit may vary slightly)
• Pouze pro vnitřní použití