Zavedení
The XPOWER P-830H Pro 1 HP Centrifugal Air Mover is an energy-efficient, high-velocity fan designed for a variety of drying, cooling, and ventilation applications. It is ideal for water damage restoration, janitorial tasks, plumbing, and general home use. Its robust construction and versatile features make it a valuable tool for both indoor and outdoor environments.
Figure 1: XPOWER P-830H Pro Air Mover, a powerful and compact unit.
Bezpečnostní informace
Always read and understand all instructions before using the XPOWER P-830H Air Mover. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.
- Ujistěte se, že je jednotka připojena k řádně uzemněné zásuvce.
- Neprovozujte jednotku s poškozeným kabelem nebo zástrčkou.
- Během provozu držte děti a domácí zvířata v dostatečné vzdálenosti od jednotky.
- Do not use in standing water or excessively wet conditions.
- Avoid blocking air intake or exhaust openings.
- Disconnect from power supply before servicing or cleaning.
- This product is ETL/CETL safety certified, indicating compliance with North American safety standards.
Nastavení
The P-830H is designed for quick and easy deployment.
- Rozbalení: Carefully remove the air mover from its packaging. Inspect for any shipping damage.
- Umístění: Place the air mover on a stable, flat surface. The unit features three drying positions (0°, 20°, and 90°) to direct airflow precisely where needed. Utilize the built-in kickstand for angled positions.
- Připojení napájení: Extend the 20 ft. industrial power cord and plug it into a suitable grounded electrical outlet.
- Stohování (volitelné): For larger areas or storage, multiple P-830H units can be stacked up to four units high. Ensure units are securely stacked before operation.
Figure 2: The P-830H can be positioned at 0°, 20°, and 90° angles for optimal airflow direction.
Figure 3: Units can be stacked up to three high for efficient storage and transport.
Návod k obsluze
The XPOWER P-830H is simple to operate with its intuitive controls.
- Zapnutí: Locate the speed switch on the top of the unit.
- Vyberte rychlost: Turn the switch to select one of the three available speeds (1, 2, or 3). Speed 3 provides the maximum airflow of 3600 CFM.
- Upravit pozici: If necessary, adjust the unit's position to 0°, 20°, or 90° to optimize airflow for the target area.
- Sledování: Allow the unit to operate until the desired drying or ventilation is achieved.
- Vypnout: Turn the speed switch to the "OFF" position when finished.
Figure 4: The control panel features a speed switch and convenient cord wrap for storage.
Aplikace:
- Water Damage Restoration: Accelerates drying of carpets, floors, walls, and other surfaces after leaks or floods.
- Větrání: Improves air circulation in enclosed spaces, workshops, garages, and basements.
- Obecné sušení: Useful for drying paint, furniture, and auto interiors.
Figure 5: The P-830H is versatile for various drying and ventilation needs.
Údržba
Regular maintenance ensures optimal performance and longevity of your air mover.
- Čištění: Pravidelně otírejte vnější povrch jednotky čisticím prostředkem.amp tkanina. Před čištěním se ujistěte, že je jednotka odpojena ze zásuvky.
- Přívod/výfuk vzduchu: Keep the air intake and exhaust grilles free from dust, debris, and obstructions to maintain efficient airflow.
- Skladování: When not in use, store the air mover in a cool, dry place. The unit's stackable design allows for efficient storage. Utilize the wrap-around cord design to keep the power cord tidy.
Odstraňování problémů
If you encounter issues with your XPOWER P-830H, refer to the following common troubleshooting steps:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Jednotka se nezapne. | No power, tripped circuit breaker, damaged cord/plug. | Check power outlet, reset circuit breaker, inspect cord/plug for damage. |
| Snížené proudění vzduchu. | Blocked air intake/exhaust, dirty fan blades. | Clear obstructions, clean grilles and fan blades (ensure unit is unplugged). |
| Neobvyklý hluk nebo vibrace. | Loose components, foreign object inside, unit not on a stable surface. | Ensure unit is on a stable surface, check for loose parts or foreign objects. If problem persists, contact customer service. |
For issues not listed above, or if troubleshooting steps do not resolve the problem, please contact XPOWER customer service.
Specifikace
| Funkce | Detail |
|---|---|
| Značka | XPOWER |
| Číslo modelu | P-830H-Blue |
| Motor | 1 HP Induction Motor |
| Proud vzduchu | Až 3600 CFM (kubických stop za minutu) |
| Amperage Kreslit | 8.5 Amps (při nejvyšším nastavení) |
| Rychlosti | 3 (nízká, střední, vysoká) |
| Sušící pozice | 0°, 20°, 90° |
| Materiál bydlení | Injection-Molded Polypropylene (PP) |
| Délka napájecího kabelu | 20 stop |
| Rozměry (D x Š x V) | 15.9 cm x 18.7 cm x 18.7 cm |
| Hmotnost položky | 27 libry |
| Bezpečnostní certifikace | ETL / CETL |
Figure 6: Key dimensions of the P-830H Air Mover.
Figure 7: Detailed specifications for the P-830H and other Pro Series models.
Záruka a podpora
The XPOWER P-830H Air Mover is backed by a 1letá omezená záruka výrobceTato záruka se vztahuje na vady materiálu a zpracování při běžném používání.
For warranty claims, technical support, or any inquiries, please contact XPOWER Manufacture Inc. customer service. Their California-based team offers comprehensive support to ensure a first-class customer experience.
Kontaktní údaje: Please refer to the official XPOWER website or your product packaging for the most current contact details.
