Deutsch DTM 6-pin Connector Kit User Manual

1. Úvod

This manual provides essential information for the proper use, installation, and maintenance of the Deutsch DTM 6-pin Connector Kit. Deutsch electrical connectors are engineered to perform reliably in demanding industrial environments, offering advanced performance characteristics. Adherence to proper procedures and the use of appropriate tooling are crucial for optimal functionality and longevity.

The DTM series connectors are designed for applications requiring smaller wire gauge solutions, offering robust performance in a compact design.

2. Bezpečnostní informace

Always observe the following safety precautions when working with electrical connectors:

• Ensure all power sources are disconnected before installing, maintaining, or troubleshooting electrical connectors.
• Používejte vhodné osobní ochranné prostředky (OOP), jako jsou ochranné brýle a rukavice.
• Verify that the wire gauge and current ratings are compatible with the connector specifications to prevent overheating or damage.
• Avoid exposing connectors to excessive mechanical stress or sharp objects that could compromise their integrity.
• Consult a qualified electrician or technician if you are unsure about any installation or maintenance procedures.

3. Konec produktuview a klíčové vlastnosti

The Deutsch DTM 6-pin Connector Kit includes all necessary components for creating a secure and reliable electrical connection for 20AWG wires.

Figure 1: Components of the Deutsch DTM 6-pin connector kit, including male and female housings, orange wedges, and solid contacts for 20AWG wire.

Klíčové vlastnosti:

• 100% Genuine Deutsch Parts: Manufactured by TE Connectivity, ensuring authenticity and quality.
• Fluid Resistance: Connectors are designed to show no damage when exposed to most fluids commonly used in industrial applications.
• Vodotěsný design: When properly wired and mated, connections are waterproof, capable of immersion under 3 feet of water without loss of electronic qualities or leakage.
• High Insulation Resistance: Minimum of 1000 megohms at 25°C.
• Low Current Leakage: Less than 2 milliamps při 1500 V stř.
• Široký rozsah provozních teplot: Operates continuously from -55°C to +125°C at rated current.

Figure 2: Graphic illustrating the performance specifications of Deutsch connectors, including operating temperature range, resistance to vibration, immersion depth, insulation resistance, current leakage, and resistance to physical shocks and industrial fluids.

4. Nastavení a instalace

Proper installation is critical for the performance and reliability of Deutsch DTM connectors. Always use the correct crimping tools and follow these steps:

1. Připravte dráty: Strip approximately 3/16 inch (4.76 mm) of insulation from the end of the 20AWG wire. Ensure the stripped wire is clean and free of frayed strands.
2. Crimp Contacts: Insert a solid contact into the appropriate crimping tool (e.g., Deutsch HDT-48-00 or similar DTM crimper). Insert the stripped wire into the contact and crimp firmly. Verify the crimp is secure by gently tugging on the wire. The insulation should not enter the crimp barrel.
3. Insert Contacts into Housing: Push the crimped contact into the correct cavity of the connector housing until a click is heard or felt. Gently pull on the wire to ensure the contact is fully seated and locked into place. Repeat for all wires.
4. Install Wedges: Once all contacts are inserted, push the orange wedge lock into the front of the connector housing until it is fully seated. This provides additional contact retention.
5. Mate Connectors: Align the male and female connector halves and push them together until they fully engage and latch.

Poznámka: Using incorrect tools or improper crimping techniques can lead to poor electrical connections, reduced performance, and potential failure.

5. Provozní podmínky

Deutsch DTM connectors are designed for reliable operation under a range of challenging conditions:

• Teplota: -55°C to +125°C continuous at rated current.
• Vibrace: Resistant to 3D vibration of 20G's at 10-2000Hz.
• Physical Shock: Resistant to 3D physical shocks at 50G's.
• Expozice tekutin: No damage from most industrial fluids.
• Ponoření do vody: Withstands immersion under 3 feet of water when properly wired and mated.
• Trvanlivost: No defect after 100 cycles of connect and disconnect.

6. Údržba

Deutsch DTM connectors require minimal maintenance due to their robust design. However, periodic inspection can help ensure continued performance:

• Vizuální kontrola: Periodically check connectors for any signs of physical damage, corrosion, or discoloration.
• Čištění: If necessary, clean the connector surfaces with a lint-free cloth and a mild, non-abrasive cleaner suitable for plastics and electrical components. Ensure connectors are dry before re-mating.
• Opětovné usazení: If a connection seems intermittent, carefully un-mate and re-mate the connectors to ensure full engagement.

7. Řešení problémů

This section addresses common issues that may arise with Deutsch DTM connectors.

8. Specifikace

9. Záruka a podpora

This Deutsch DTM 6-pin Connector Kit consists of 100% genuine Deutsch parts, manufactured by TE Connectivity. These products are designed and tested to meet high-performance standards.

Figure 3: The TE Connectivity logo, representing the manufacturer of Deutsch connectors, signifies genuine product quality and support.

For specific warranty details or technical support, please refer to the official TE Connectivity documentation or contact their customer service directly. Ensure you have your product model number (DTM6-WNS-20-KIT) available when seeking support.

Pro další informace můžete navštívit Oficiální zástupce TE Connectivity webmísto.