Intermec PB32A10004000 Series PB32 3-inch Rugged Mobile Direct Thermal Label-Receipt Printer User Manual

1. Úvod

This manual provides essential instructions for the safe and efficient operation of your Intermec PB32A10004000 Series PB32 3-inch Rugged Mobile Direct Thermal Label-Receipt Printer. Please read this manual thoroughly before using the device and retain it for future reference.

The Intermec PB32 is a rugged mobile printer designed for demanding retail and warehouse environments. It offers fast label printing and seamless integration with Intermec mobile computers and other mobile devices.

2. Bezpečnostní informace

• Use only Intermec-approved power adapters and batteries.
• Do not expose the printer to extreme temperatures, moisture, or direct sunlight.
• Avoid dropping or subjecting the printer to severe impacts.
• Keep the printer away from flammable materials.
• Nepokoušejte se tiskárnu rozebírat ani opravovat sami. Obraťte se na kvalifikovaný servisní personál.
• Během provozu a nabíjení zajistěte dostatečné větrání.

3. Obsah balení

Upon opening the package, verify that all items are present and undamaged. The standard package typically includes:

• Intermec PB32A10004000 Mobile Printer
• Dobíjecí baterie
• Napájecí adaptér/nabíječka
• Stručný průvodce (nebo podobná dokumentace)
• Roll of Thermal Label/Receipt Media (may vary by region/bundle)

Image 1: The product packaging box for the Intermec PB32A10004000 printer. The box is white with the brand name "Intermec" and the model number "PB32A10004000" clearly visible on its side.

4. Nastavení

4.1. Nabíjení baterie

1. Insert the rechargeable battery pack into the designated battery compartment of the printer. Ensure it clicks securely into place.
2. Připojte napájecí adaptér k nabíjecímu portu tiskárny.
3. Zapojte napájecí adaptér do standardní elektrické zásuvky.
4. Allow the printer to charge fully before initial use. The charging indicator light will typically change color or turn off when charging is complete.

4.2. Vkládání tiskových médií

1. Open the media cover latch on the printer.
2. Place the roll of thermal labels or receipt paper into the media compartment. Ensure the print side of the media is facing the print head.
3. Pull a small length of media out past the print head and align it with the media guides.
4. Close the media cover securely until it latches.

4.3. Připojení k hostitelskému zařízení

The PB32 printer supports Bluetooth, RS232 Serial, and USB connectivity.

4.3.1. Připojení Bluetooth

1. Ensure the printer is powered on and Bluetooth is enabled (refer to printer's display or indicator lights).
2. On your host device (e.g., smartphone, mobile computer), navigate to Bluetooth settings and search for available devices.
3. Select "Intermec PB32" (or similar name) from the list.
4. Enter the pairing PIN if prompted (default PIN is often 0000 or 1234, refer to specific device documentation).
5. Once paired, the printer is ready for wireless printing.

4.3.2. Připojení USB

1. Connect one end of a compatible USB cable to the printer's USB port.
2. Connect the other end of the USB cable to your host device (e.g., computer, mobile computer).
3. Install necessary printer drivers on your host device if prompted.

4.3.3. RS232 Serial Connection

1. Connect a compatible RS232 serial cable to the printer's serial port.
2. Connect the other end of the serial cable to your host device.
3. Configure the serial communication settings (baud rate, data bits, parity, stop bits) on both the printer and the host device to match.

5. Návod k obsluze

5.1. Zapnutí/vypnutí

• Zapnutí: Stiskněte a podržte tlačítko napájení, dokud se nerozsvítí kontrolky.
• Vypnutí: Stiskněte a podržte tlačítko napájení, dokud kontrolky nezhasnou.

5.2. Základní tisk

1. Ensure the printer is powered on, has sufficient battery charge, and media is loaded correctly.
2. Verify that the printer is connected to your host device via Bluetooth, USB, or RS232.
3. From your application on the host device, select the print function.
4. Choose the Intermec PB32 printer from the list of available printers.
5. Adjust print settings (e.g., label format, quantity) as needed within your application.
6. Initiate the print job. The printer will begin printing labels or receipts.

5.3. Kontrolky

Refer to the printer's specific indicator lights for status information (e.g., power, battery, error, Bluetooth connection). Consult the quick start guide or full product documentation for detailed explanations of each light's behavior.

6. Údržba

6.1. Čištění tiskárny

• Power off the printer and disconnect it from any power source before cleaning.
• Lehce používejte měkký hadřík, který nepouští vlákna dampened with isopropyl alcohol to clean the print head. Allow it to dry completely before use.
• Otřete vnější povrch tiskárny měkkým,amp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.
• Regularly remove any dust or debris from the media compartment.

6.2. Péče o baterie

• Chcete-li maximalizovat životnost baterie, vyhněte se častému úplnému vybíjení.
• Store the printer and battery in a cool, dry place when not in use for extended periods.
• If the printer will not be used for a long time, charge the battery to approximately 50% before storage.

7. Řešení problémů

If the problem persists after attempting these solutions, contact Intermec customer support or your service provider.

8. Specifikace

9. Záruka a podpora

For warranty information, please refer to the warranty card included with your product or visit the official Intermec webUschovejte si doklad o koupi pro případ reklamace.

For technical support, service, or to purchase accessories, please contact Intermec customer support through their official channels. Contact details can typically be found on the manufacturer's webmístě nebo na obalu produktu.

Online resources, including drivers, firmware updates, and additional documentation, may be available on the Intermec support portal.