Zavedení
The Stelpro KI STZW402WB+ is the first Z-Wave line voltage thermostat designed for electric baseboards and convectors in North America. This thermostat seamlessly integrates into your home's Z-Wave network, providing remote temperature control for individual rooms. Beyond simple temperature adjustments, its Z-Wave technology enables the activation of complex scenes, coordinating various smart home functions such as lighting, security, and entertainment systems.
Obrázek 1: Přední strana view of the Stelpro KI STZW402WB+ Z-Wave Thermostat.
Klíčové vlastnosti
- Unique Z-Wave Compatibility: The Stelpro KI is the first Z-Wave thermostat in North America to operate with line voltage, featuring a 2-wire connection suitable for heaters.
- Efficient Heating Control: Remotely manage your baseboard and convector heaters using a mobile device or computer when connected to a Z-Wave gateway controller (sold separately).
- Smart Energy Savings: Establish personalized temperature schedules to minimize energy consumption and reduce utility bills. Utilize the device's ECO mode for enhanced energy efficiency.
- Elevated Climate Automation: Create advanced automated routines by integrating the Stelpro KI with other Z-Wave devices. For example, trigger heating based on door/window sensors, temperature sensors, or motion sensors.
- Certifikovaná kvalita: This thermostat holds Z-Wave Plus and UL certifications, ensuring high standards of quality and safety. Proudly made in Canada. Compatible with popular smart home platforms including SmartThings, Vera, HomeSeer, Nexia, and Wink.
Nastavení a instalace
Installation of the Stelpro KI STZW402WB+ thermostat requires basic electrical knowledge. It is strongly recommended that installation be performed by a qualified electrician to ensure safety and compliance with local electrical codes. The thermostat is designed for 240-volt electric baseboards and convectors.
Kontrolní seznam před instalací:
- Ensure the main power supply to the heating system is turned OFF at the circuit breaker before beginning any installation.
- Ověřte, že svtage of your heating system matches the thermostat's requirements (240 Volts).
- Gather necessary tools: screwdriver, wire strippers, electrical tape, and a voltage tester.
Montáž a zapojení:
The thermostat is designed for wall mounting. Its compact dimensions allow for discreet placement while providing easy access to controls.
Figure 2: Dimensions of the Stelpro KI STZW402WB+ Thermostat (approximately 4 7/8" x 4 7/8" x 1 3/8").
Connect the thermostat wires to your heating system's line and load wires according to the wiring diagram provided in the full installation guide (not included here). Ensure all connections are secure and insulated. After wiring, carefully mount the thermostat to the wall box.
Návod k obsluze
Once installed and powered on, the Stelpro KI STZW402WB+ thermostat will display the current room temperature. You can adjust the setpoint temperature directly on the device or remotely via your Z-Wave gateway controller.
Figure 3: Stelpro KI STZW402WB+ Thermostat installed in a living space.
Základní provoz:
- Nastavení teploty: Use the up and down buttons on the thermostat to manually increase or decrease the desired temperature setpoint. The LCD screen will show both the current temperature and the setpoint.
- Z-Wave Pairing: Refer to your Z-Wave gateway controller's instructions for adding a new device. The thermostat will enter pairing mode when prompted, allowing it to join your smart home network.
- Režimy: The thermostat typically operates in heating mode. It may also feature an ECO mode for energy-efficient operation, which can be configured via your Z-Wave controller.
For advanced programming, scheduling, and scene creation, utilize the interface of your Z-Wave hub or smart home application.
Údržba
The Stelpro KI STZW402WB+ thermostat requires minimal maintenance to ensure optimal performance and longevity.
- Čištění: Pravidelně otírejte vnější povrch termostatu měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky, rozpouštědla ani chemické spreje, protože by mohly poškodit plastové a elektronické součástky.
- Odstranění prachu: Ensure that the vents on the thermostat are free from dust accumulation to allow for proper air circulation and accurate temperature sensing.
- Žádné díly opravitelné uživatelem: Termostat neobsahuje žádné součásti, které by mohl uživatel opravit. Nepokoušejte se jednotku sami otevírat ani opravovat.
Odstraňování problémů
If you encounter issues with your Stelpro KI STZW402WB+ thermostat, consider the following common troubleshooting steps:
- Žádný displej/Žádné napájení: Check the circuit breaker connected to the heating system. Ensure it is in the ON position. Verify that the thermostat is properly wired and securely connected.
- Topení se neaktivuje: Confirm the setpoint temperature is higher than the current room temperature. Check if the thermostat is properly paired with your Z-Wave gateway.
- Nepřesný údaj teploty: Zajistěte, aby termostat nebyl vystaven přímému slunečnímu záření, průvanu nebo zdrojům tepla (např.amps, appliances) that could affect its internal temperature sensor.
- Problémy s připojením Z-Wave: Try re-pairing the thermostat with your Z-Wave controller. Ensure the thermostat is within range of your Z-Wave network and that there are no significant obstructions.
- Thermostat Feels Warm: It is normal for the thermostat to feel warm to the touch, especially during periods of high heating demand, as it manages line voltage.
For persistent issues or complex problems, please contact Stelpro customer support.
Specifikace
| Funkce | Specifikace |
|---|---|
| Značka | Stelpro |
| Název modelu | STZW402WB+ |
| Typ ovladače | Nexia, Vera, Wink, SmartThings |
| Speciální funkce | UNIQUE Z-WAVE |
| Barva | Bílý |
| Specifické použití pro produkt | elektrický ohřívač |
| Typ řízení teploty | Topení |
| Technologie připojení | Z-Wave |
| Zahrnuté komponenty | Integrovaný mechanický termostat |
| Zdroj napájení | Elektrický |
| Hmotnost položky | 12.8 unce |
| svtage | 240 voltů |
| Tvar | Obdélníkový |
| Typ zobrazení | LCD |
| Typ ovládání | Ovládání tlačítkem |
| Kontrolní metoda | App |
| Typ montáže | základní deska |
| Styl | Chytrý |
| Podsvícení | Ano |
| Specifikace splněna | UL certifikováno |
| Wattage | 4000.00 |
| Rozměry produktu | 5.2 x 5 x 2 palce |
Informace o záruce
The Stelpro KI STZW402WB+ Thermostat comes with a 5letá omezená záruka. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and limitations of the warranty, please refer to the official warranty document included with your product or contact Stelpro customer service.
Zákaznická podpora
For any assistance regarding parts, installation, service, or general inquiries about your Stelpro KI STZW402WB+ Thermostat, please contact Stelpro directly:
- Telefon: 1-844-STELPRO (1-844-783-5776)
- E-mail: elec.tech@stelpro.com
When contacting support via email, please include the nature of your problem for a prompt response. Stelpro aims to acknowledge and reply to emails within 24 hours.
