Uživatelská příručka k bezdrátovému sériovému adaptéru Sena SD1000 s dlouhým dosahem a Bluetooth

1. Úvod

This manual provides detailed instructions for the proper use and maintenance of the Sena SD1000 Long Range Bluetooth Serial Adapter. The SD1000 is designed to replace traditional RS-232 serial cables with a wireless Bluetooth connection, offering enhanced flexibility and range for various applications.

2. Konec produktuview

The Sena SD1000 is a Class 1 Bluetooth Serial Adapter, capable of wireless communication up to 100 meters by default. With optional external antennas, this range can be extended up to 1000 meters. It complies with Bluetooth v2.0+EDR specifications and supports the Serial Port Profile (SPP). The device can manage up to four simultaneous connections and offers flexible power options, including standard and extended battery packs.

Klíčové vlastnosti:

• Wireless Bluetooth replacement for RS-232 communication.
• Bluetooth v2.0 + EDR Class 1 compliant.
• Standard range of 100 meters, extendable up to 1 kilometer with optional patch antenna.
• Maximum transmit power of +18 dBm.
• Receive sensitivity of -88 dBm (0.1% BER).
• Supports Serial Port Profile (SPP).
• Easy-to-use Windows configuration tools.
• Supports up to 4 multiple simultaneous connections.

Obrázek 1: Přední strana view of the Sena SD1000 Bluetooth Serial Adapter, showing the RS-232 connector and antenna port.

3. Pokyny k nastavení

Follow these steps to set up your Sena SD1000 Bluetooth Serial Adapter.

3.1 Napájení zařízení

• Napájení baterie: Insert a compatible standard or extended battery pack (sold separately) into the designated compartment. Ensure the battery is fully charged for optimal performance.
• Napájení USB: Connect the provided USB power cord to the device and a suitable USB power source (e.g., computer USB port, USB wall adapter). Note that a USB power supply is not included.

3.2 Connecting to an RS-232 Device

1. Ensure the Sena SD1000 is powered on.
2. Connect the RS-232 connector of the SD1000 to the serial port of your target device (e.g., PC, PLC, industrial equipment).
3. Secure the connection using the provided screws on the RS-232 connector.

Obrázek 2: Nahoře view of the Sena SD1000, highlighting the dip switches for configuration and LED indicators.

3.3 Initial Configuration (Baud Rate and Flow Control)

The Sena SD1000 features dip switches for hardware configuration of baud rate and hardware flow control. Refer to Figure 2 for the location of these switches.

• Přenosová rychlost: Adjust the dip switches according to the required baud rate of your connected RS-232 device. Common settings (e.g., 9600, 19.2K, 38.4K, 115.2K) are typically labeled on the device.
• Hardware Flow Control (H/W Flow Control): Set the corresponding dip switch to ON or OFF based on whether your application requires hardware flow control.

For advanced configuration and software-based settings, use the provided Windows configuration tools. These tools allow for detailed parameter adjustments and profile řízení.

4. Návod k obsluze

Once the SD1000 is physically connected and configured, you can establish a wireless Bluetooth serial connection.

4.1 Párování Bluetooth

1. Ensure the SD1000 is powered on and its Bluetooth LED indicator (labeled "Bluetooth" or "Pairing" on the device) is active, indicating it is discoverable or ready for connection.
2. On your host device (e.g., laptop, desktop with Bluetooth capability), search for available Bluetooth devices.
3. Select the Sena SD1000 from the list of discovered devices.
4. If prompted, enter the default Bluetooth PIN (usually "0000" or "1234"). Refer to the device's documentation or the configuration software for the exact PIN.
5. Once paired, the "Connect" LED on the SD1000 should illuminate, indicating a successful connection.

4.2 Přenos dat

After successful pairing and connection, the SD1000 acts as a transparent serial bridge. Any data sent to the virtual COM port on your host device will be transmitted wirelessly via Bluetooth to the connected RS-232 device, and vice-versa.

• The "RS232-Tx/Rx" LED indicates data transmission activity.
• The SD1000 supports up to 4 simultaneous Bluetooth connections, allowing multiple host devices to communicate with the serial adapter.
• For optimal range, ensure a clear line of sight between the SD1000 and the paired Bluetooth device. Use optional patch antennas for extended range requirements up to 1 kilometer.

5. Údržba

To ensure the longevity and reliable operation of your Sena SD1000, follow these maintenance guidelines:

• Čištění: K čištění vnějších částí zařízení používejte měkký, suchý hadřík. Vyhněte se používání agresivních chemikálií nebo abrazivních materiálů.
• Skladování: Pokud zařízení nepoužíváte, skladujte ho na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
• Péče o baterie: If using battery packs, ensure they are charged regularly and stored properly. Avoid fully discharging batteries for extended periods.
• Aktualizace firmwaru: Periodically check the Sena website for any available firmware updates for the SD1000. Firmware updates can improve performance and add new features.

6. Řešení problémů

This section addresses common issues you might encounter with the Sena SD1000.

6.1 Zařízení se nezapíná

• Zkontrolujte zdroj napájení: Ensure the battery pack is correctly inserted and charged, or that the USB power cable is securely connected to a functional power source.
• Stav baterie: If using a battery, try a different battery pack or connect via USB power to rule out a faulty battery.

6.2 Unable to Pair or Connect

• Bluetooth povoleno: Verify that Bluetooth is enabled on your host device and that the SD1000's Bluetooth indicator is active.
• Correct PIN: Ensure you are entering the correct Bluetooth PIN (default is often "0000" or "1234"). Check the device's manual or configuration software for the exact PIN.
• Opětovné spárování: If previous pairing attempts failed or the device loses connection frequently, try deleting the SD1000 from your host device's Bluetooth list and re-pairing from scratch.
• Rušení: Minimize potential interference by ensuring the SD1000 is not too close to other wireless devices or large metal objects.
• Baud Rate Mismatch: Confirm that the baud rate settings on the SD1000 (via dip switches or software) match the baud rate of the connected RS-232 device.

6.3 Žádný přenos dat

• Stav připojení: Verify that the "Connect" LED on the SD1000 is illuminated, indicating an active Bluetooth connection.
• Připojení RS-232: Ensure the RS-232 cable is securely connected to both the SD1000 and the serial device.
• Baud Rate and Flow Control: Double-check that the baud rate and hardware flow control settings on the SD1000 match those of the connected RS-232 device. Incorrect settings are a common cause of communication failure.
• Konfigurační software: Use the Windows configuration tools to verify all serial port settings (e.g., data bits, stop bits, parity) are correctly configured and match your application's requirements.

7. Specifikace

8. Záruka a podpora

For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official Sena webmísto.

For technical support, software downloads (including Windows configuration tools), and additional resources, please visit the Sena support portal or contact their customer service.

Výrobce: Sena
Webmísto: www.sena.com (Napřampodkaz, skutečný odkaz se může lišit)