Moen WS84440SRN Two-Handle High Arc Bathroom Faucet

Zavedení

Thank you for choosing a Moen faucet. This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Moen WS84440SRN Two-Handle High Arc Bathroom Faucet. Please read this manual thoroughly before beginning installation to ensure proper function and longevity of your product. This faucet features a Spot Resist Brushed Nickel finish, designed to resist fingerprints and water spots, and two lever handles for easy water adjustment.

Image: The Moen WS84440SRN Two-Handle High Arc Bathroom Faucet in Spot Resist Brushed Nickel finish. This image shows the main faucet body with its high arc spout and two separate lever handles.

Bezpečnostní informace

Always turn off the main water supply before installing or servicing the faucet. Wear safety glasses and gloves during installation. If you are unsure about any part of the installation process, consult a qualified plumber.

Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• Bathroom Faucet Assembly (Spout and Handles)
• Vypouštěcí zařízení
• Montážní hardware
• Rozvody teplé a studené vody
• Návod k použití (tento dokument)
• Valve (included)

Nastavení a instalace

Kontroly před instalací

• Ensure your sink has a three-hole configuration for widespread installation. The faucet handles can be installed at any distance between 8 inches to 16 inches.
• Vyčistěte prostor pod dřezem.
• Vypněte hlavní přívod vody do koupelny.

Požadované nástroje (nejsou součástí dodávky)

• Nastavitelný klíč
• Phillips šroubovák
• Instalatérský tmel nebo silikonový tmel
• Svítilna (volitelné)

Kroky instalace

1. Připravte si dřez: Clean the faucet mounting area on the sink. Apply a thin bead of plumber's putty or silicone sealant around the base of the faucet spout and handles.
2. Instalace výtoku z kohoutku: Insert the faucet spout through the center hole of the sink. From underneath the sink, secure it with the provided washer and mounting nut. Tighten firmly but do not overtighten.
3. Instalace rukojetí: Insert the hot and cold handles through the outer holes of the sink. Ensure they are oriented correctly (hot on left, cold on right). Secure them from underneath with their respective washers and mounting nuts.
4. Připojení přívodních vodovodních potrubí: Attach the hot and cold water supply lines to the corresponding inlets on the faucet handles. Connect the other ends of the supply lines to your home's hot and cold water shut-off valves. Use an adjustable wrench to tighten connections, being careful not to overtighten.
5. Instalace odtokové sestavy: Follow the separate instructions provided with the drain assembly. Ensure a watertight seal at the sink opening.
6. Zkouška těsnosti: Slowly turn on the main water supply. Check all connections for leaks. If leaks are present, tighten the connections slightly until they stop.
7. Spláchněte kohoutek: Remove the aerator from the spout. Turn on both hot and cold water for a few minutes to flush out any debris from the lines. Turn off the water, reattach the aerator, and test the flow.

Image: A diagram illustrating a standard three-hole sink configuration, indicating where the faucet spout and two handles would be installed. This faucet is designed for such a setup.

Image: The Moen WS84440SRN faucet shown installed on a white bathroom sink, demonstrating its appearance in a typical bathroom setting.

Operace

Your Moen WS84440SRN faucet features two lever handles for precise control of water temperature and flow.

• Zapnutí/vypnutí: Rotate either handle upwards to turn on the water and downwards to turn off.
• Nastavení teploty: The left handle controls hot water, and the right handle controls cold water. Adjust the handles simultaneously to achieve your desired water temperature.
• Nastavení průtoku: The further you rotate the handles upwards, the greater the water flow.

The aerated flow is ideal for everyday bathroom tasks such as brushing teeth and washing hands.

Údržba a čištění

Pravidelné čištění a údržba pomohou zachovat povrchovou úpravu a funkčnost vaší baterie Moen.

Čištění povrchové úpravy

The Spot Resist Brushed Nickel finish is designed to be easy to clean. To maintain its appearance:

• Použijte měkký, damp hadříkem a jemným mýdlem.
• Vyhněte se abrazivním čisticím prostředkům, agresivním chemikáliím nebo drátěnkám, protože by mohly poškodit povrchovou úpravu.
• Wipe the faucet dry after each use to prevent water spots.

Údržba provzdušňovače

If water flow decreases or becomes irregular, the aerator may be clogged. To clean:

1. Odšroubujte perlátor z hrotu výpusti.
2. Opláchněte všechny nečistoty ze sítka. V případě odolných minerálních usazenin namočte provzdušňovač do roztoku bílého octa a vody v poměru 50/50.
3. Reattach the aerator to the spout.

Odstraňování problémů

Tato část se zabývá běžnými problémy, se kterými se můžete setkat u svého kohoutku.

Specifikace

Informace o záruce

Your Moen WS84440SRN Two-Handle High Arc Bathroom Faucet is backed by Moen's Limited Lifetime Warranty. This warranty covers defects in material and manufacturing workmanship for the original consumer purchaser. For full details regarding warranty coverage, limitations, and how to make a claim, please refer to the official Moen warranty documentation or visit the Moen webmísto.

Zákaznická podpora

If you require further assistance, have questions not covered in this manual, or need to order replacement parts, please contact Moen customer support. Contact information can typically be found on the Moen website or on the product packaging. When contacting support, please have your model number (WS84440SRN) and purchase date available.