Whynter UIM-502SS

Whynter UIM-502SS Built-in Ice Maker Machine

Návod k použití

Zavedení

This manual provides essential information for the safe and efficient operation of your Whynter UIM-502SS Built-in Ice Maker Machine. Please read all instructions carefully before installation and use to ensure proper function and longevity of the appliance. Keep this manual for future reference.

Whynter UIM-502SS Ice Maker with included accessories

Image: Whynter UIM-502SS Ice Maker with an ice scoop, water hoses, and an inline water filter.

Bezpečnostní informace

Abyste snížili riziko požáru, úrazu elektrickým proudem nebo zranění při používání vašeho spotřebiče, dodržujte tato základní opatření:

  • Před použitím spotřebiče si přečtěte všechny pokyny.
  • Nedotýkejte se studených povrchů mokrými neboamp hands. Skin may stick to these extremely cold surfaces.
  • Nikdy nečistěte části spotřebiče hořlavými kapalinami. Výpary mohou způsobit požár nebo výbuch.
  • Neskladujte ani nepoužívejte benzín nebo jiné hořlavé výpary a kapaliny v blízkosti tohoto ani jiného spotřebiče.
  • Before performing any maintenance or cleaning, ensure the appliance is unplugged from the power outlet.
  • Tento spotřebič není určen pro použití osobami (včetně dětí) se sníženými fyzickými, smyslovými nebo duševními schopnostmi nebo nedostatečnými zkušenostmi a znalostmi, pokud na ně nedohlíží osoba odpovědná za jejich bezpečnost nebo jim nebyla poskytnuta instrukce ohledně používání spotřebiče.
  • Děti by měly být pod dozorem, aby bylo zajištěno, že si se spotřebičem nebudou hrát.

Nastavení

Vybalování

Carefully remove all packaging materials. Retain the packaging for potential future transport of the appliance. Ensure all components listed in the 'What's in the Box' section are present.

Umístění

The Whynter UIM-502SS is designed for both freestanding and built-in installation. Ensure adequate ventilation around the unit, especially for the front-venting design. Maintain proper clearances as specified in the dimensions below.

Whynter UIM-502SS Ice Maker with dimensions labeled

Image: The Whynter UIM-502SS ice maker showing its dimensions: 32.8" H, 14.6" W, 23.6" D (add 2" for handle).

The unit should be placed on a level, stable surface capable of supporting its weight when full of ice and water. Avoid direct sunlight or heat sources.

Připojení vody

This ice maker requires a direct water connection. It is strongly recommended that a licensed plumber perform the water supply connection to prevent leaks or damage. The unit includes an NSF-certified inline water filter to ensure clean water for ice production. Install the filter according to the separate filter instructions.

Odvodnění

The unit features a built-in gravity drain system to effectively remove melted ice and excess water. Ensure the drain hose is properly connected and routed to a suitable drain point, following local plumbing codes.

Zadní view of Whynter UIM-502SS Ice Maker showing water and drain connections

Obrázek: Zadní view of the ice maker, highlighting the water inlet and drain hose connections.

Elektrické připojení

Connect the appliance to a dedicated, grounded 120V/60Hz electrical outlet. Do not use extension cords or adapter plugs.

Počáteční čištění

Before first use, clean the interior of the ice maker and the ice bin with a mild detergent and warm water. Rinse thoroughly and dry.

Návod k obsluze

Ovládací panel

The control panel is located on the front of the unit, featuring a simple one-switch operation for ICE, OFF, and WASH modes.

Close-up of Whynter UIM-502SS control panel

Obrázek: Detailní záběr view of the ice maker's control panel, showing the 'ICE', 'OFF', and 'WASH' switch.

Výroba ledu

To begin ice production, set the switch to 'ICE'. The unit will automatically start the ice-making cycle. Water is recirculated, and minerals are removed as clean water freezes to the ice grid, producing clear ice cubes. The unit can produce up to 80 lbs of ice in 24 hours.

Skladování ledu

The ice maker has a storage capacity of up to 25 lbs. The ice bin is designed to hold the produced ice. Use the provided ice scoop to retrieve ice.

Whynter UIM-502SS Ice Maker with door open, showing ice bin

Image: The ice maker with its door open, revealing the internal ice storage bin.

Údržba

Čištění

Regular cleaning is crucial for optimal performance and hygiene. The unit features a 'WASH' mode for automated cleaning. Refer to the detailed cleaning instructions in the full manual for specific steps on descaling and sanitizing the unit. Always unplug the unit before manual cleaning.

Výměna vodního filtru

The inline water filter should be replaced periodically, typically every 6 months or as indicated by water quality and usage, to maintain optimal ice quality and prevent mineral buildup. Consult the filter's specific instructions for replacement procedures.

Odstraňování problémů

If the ice maker is not functioning correctly, review the following common issues before contacting support:

  • Žádná tvorba ledu: Check power connection, water supply, and ensure the unit is in 'ICE' mode.
  • Špatná kvalita ledu: Ensure the water filter is not clogged and is replaced regularly. Perform a cleaning cycle.
  • Úniky vody: Verify all water connections and drain hose are securely fastened.
  • Neobvyklý hluk: Some operational noise is normal. Excessive or new noises may indicate an issue; consult the full manual or support.

For more detailed troubleshooting steps, refer to the comprehensive troubleshooting guide in the complete product manual.

Specifikace

FunkceSpecifikace
ZnačkaWhynter
Název modeluBuilt-In/ Freestanding Ice Maker - 80lb capacity Clear Ice Cube
Číslo modeluUIM-502SS
Rozměry produktu (D x Š x V)23.6 cm x 14.6 cm x 32.8 cm
Kapacita výroby ledu80 liber za 24 hodin
Kapacita úložiště ledu25 liber
Wattage1000 wattů
svtage120 voltů
MateriálNerez
Typ instalaceVolně stojící / Vestavěné
Zahrnuté komponentyIce Maker, Ice Scoop, Water Hose, Drain Hose

Informace o záruce

This Whynter appliance is warranted against defects in materials and workmanship for a period of one year from the date of original purchase. For full warranty terms and conditions, please refer to the warranty card included with your product or visit the official Whynter webmísto.

Zákaznická podpora

For technical assistance, troubleshooting, or to order replacement parts, please contact Whynter Customer Support. Contact information can be found on the official Whynter website or on your product's warranty card.