Uživatelská příručka k basovému kompresoru TC Electronic SPECTRACOMP

Zavedení

Welcome to the TC Electronic SPECTRACOMP BASS COMPRESSOR. This ultra-compact pedal provides studio-quality multiband compression specifically tuned for bass guitar. It features built-in TonePrint technology, allowing for extensive customization of compression settings to enhance your bass tone.

Nastavení

Proper setup ensures optimal performance of your SPECTRACOMP BASS COMPRESSOR.

Připojení napájení

The SPECTRACOMP BASS COMPRESSOR requires a Napájení 9V DC (not included) with a minimum current rating of 100 mA. Connect the power supply to the DC input jack located on the top of the pedal. This pedal does not operate on batteries.

Audio připojení

Připojte baskytaru k VSTUP jack on the right side of the pedal.
Připojte VÝSTUP zvedák na levé straně pedálu k vašemu amplifier nebo další pedál ve vašem signálním řetězci.

Skutečné přemostění

The pedal features true bypass circuitry, ensuring that your instrument's tone remains unaffected when the pedal is disengaged.

TC Electronic SPECTRACOMP BASS COMPRESSOR pedal, front view — **Obrázek 1:** Přední view of the SPECTRACOMP BASS COMPRESSOR pedal, showing the single control knob, footswitch, and LED indicator. This image illustrates the compact design and primary user interface elements.

Úhlové view of TC Electronic SPECTRACOMP BASS COMPRESSOR showing input and output jacks — **Obrázek 2:** Úhlové view of the SPECTRACOMP BASS COMPRESSOR, highlighting the input and output jacks on the sides, and the power input on the top. This view helps in understanding the connectivity options.

Provozní

Understanding the controls and features of your pedal.

Sepnutí pedálu

Press the footswitch to engage or disengage the compression effect. The LED indicator will illuminate when the pedal is active and the compression is applied to your signal.

Kompresní knoflík

The single control knob adjusts the overall compression intensity. Turn clockwise for more compression, and counter-clockwise for less. The specific parameters controlled by this knob are determined by the loaded TonePrint, offering a wide range of sonic possibilities from subtle leveling to aggressive squash.

Close-up of the SPECTRACOMP BASS COMPRESSOR's single control knob — **Obrázek 3:** Detailní záběr view of the SPECTRACOMP BASS COMPRESSOR's single control knob. This knob is the primary interface for adjusting the compression effect, with its function dynamically defined by the active TonePrint.

TonePrint Technology

The SPECTRACOMP BASS COMPRESSOR is TonePrint enabled. This allows you to upload custom compression settings created by TC Electronic, renowned bass players, or to design your own using the TonePrint Editor software.

Using the TonePrint App

Download the free TC Electronic TonePrint app for your smartphone (available for iOS and Android).
Select a desired TonePrint from the app's library.
Hold your phone's speaker close to your bass pickup and "beam" the TonePrint to the pedal. The pedal's LED will flash to confirm successful transfer.

Person using a smartphone to beam a TonePrint to a TC Electronic pedal — **Obrázek 4:** Illustration of the TonePrint beaming process, where a user transfers custom settings from a smartphone to the pedal. This wireless method allows for quick and easy customization.

Obrázek 5: The official TonePrint logo, representing the technology that allows for deep customization of TC Electronic pedals.

Multiband Compression

The SPECTRACOMP utilizes multiband compression, which processes different frequency ranges of your bass signal independently. This results in a more natural and transparent compression, preserving your low-end while controlling dynamics across the entire frequency spectrum, leading to a more consistent and punchy sound.

Údržba

To ensure the longevity and optimal performance of your pedal, follow these maintenance guidelines:

Keep the pedal clean and dry. Avoid exposure to extreme temperatures, humidity, or direct sunlight.
K čištění vnějšího povrchu používejte měkký, suchý hadřík. Nepoužívejte abrazivní čisticí prostředky, rozpouštědla ani agresivní chemikálie.
Ensure all cable connections (power and audio) are secure to prevent signal loss, intermittent operation, or unwanted noise.
Pokud se přístroj delší dobu nepoužívá, odpojte jej od napájení.

Odstraňování problémů

If you encounter issues with your SPECTRACOMP BASS COMPRESSOR, refer to the following common troubleshooting steps:

Žádná síla

Verify the 9V DC power supply is correctly connected to the pedal and a working power outlet.
Ensure the power supply meets the 100mA minimum current requirement.
Test the power supply with another compatible device to confirm it is functioning.

Žádný zvuk

Check all audio cables (bass to input, output to amp) for proper connection and functionality. Try swapping cables if necessary.
Ensure the pedal is engaged (the LED indicator should be illuminated).
Bypass the pedal by connecting your bass directly to your amplifier to determine if the issue is with the pedal or another part of your signal chain.

Nežádoucí hluk

Ensure proper grounding of all equipment in your setup to minimize hum or buzz.
Check for faulty audio cables, which can introduce noise.
Some TonePrints may emphasize certain frequencies, potentially highlighting existing noise in your bass or amplifier setup. Try a different TonePrint or adjust your bass/amp nastavení.

TonePrint Transfer Issues

Ensure your smartphone speaker is held directly over your bass pickup during the beaming process.
Increase the volume on your smartphone to its maximum setting during transfer.
Ensure no other audio is playing on your phone and that the environment is relatively quiet.

Specifikace

Funkce	Detail
Hmotnost položky	1 libry
Rozměry produktu	2.01 x 1.97 x 3.9 palce
Číslo modelu položky	SPECTRACOMP BASS COMPRESSOR
Hardwarové rozhraní	1/4palcový zvuk
Formát signálu	Analogový
Zdroj napájení	External 9V DC (not included), 100mA minimum
svtage	9V
Skutečné přemostění	Ano

Dno view of the TC Electronic SPECTRACOMP BASS COMPRESSOR pedal showing regulatory information — **Obrázek 6:** Dno view of the SPECTRACOMP BASS COMPRESSOR, displaying various regulatory compliance markings and power requirements. This information is crucial for safe and compliant operation.

Záruka a podpora

This product is covered by a manufacturer's warranty. For detailed warranty information, technical support, and service inquiries, please refer to the official TC Electronic website or contact their authorized customer service department. Keep your purchase receipt as proof of purchase for warranty claims.

	TC Electronic HyperGravity Mini Compressor User Manual User manual for the TC Electronic HyperGravity Mini Compressor, detailing its features, setup, controls, TonePrint functionality, firmware updates, and specifications. Learn how to achieve professionally polished tones with its state-of-the-art multiband compression.
	TC Electronic SpectraComp Bass Compressor Quick Start Guide A concise guide to the TC Electronic SpectraComp Bass Compressor, covering its controls, connections, and FCC compliance information.
	TC Electronic Hypergravity Compressor Quick Start Guide Concise guide to the TC Electronic Hypergravity Compressor guitar pedal, explaining its controls, connections, and features for quick setup and operation.
	TC Electronic SpectraComp Bass Compressor Quick Start Guide Get started quickly with the TC Electronic SpectraComp Bass Compressor. This guide explains the controls, connections, and basic operation of the SpectraComp effects pedal.
	TC Electronic INFINITE MINI SAMPLE SUSTAINER Quick Start Guide Quick start guide and safety instructions for the TC Electronic INFINITE MINI SAMPLE SUSTAINER, a compact sample and sustain guitar effects pedal featuring TonePrint technology.
	TC Electronic PLETHORA X1 Quick Start Guide A comprehensive quick start guide for the TC Electronic PLETHORA X1, detailing its features, controls, and functionalities, including TonePrint technology, MASH footswitch, and Bluetooth connectivity.

TC Electronic SPECTRACOMP BASS COMPRESSOR