Zavedení
Thank you for choosing the Mounting Dream MD5401 Height Adjustable Speaker Stands. These stands are designed to provide a stable and adjustable platform for your speakers, enhancing your audio experience by allowing optimal positioning. Please read this manual thoroughly before assembly and use to ensure safe and correct installation.
Image: Two Mounting Dream MD5401 speaker stands with speakers, showcasing their design and application.
Bezpečnostní informace
- Před montáží se ujistěte, že jsou všechny součásti přítomny a nepoškozené. Nepoužívejte, pokud některé součásti chybí nebo jsou vadné.
- Do not exceed the maximum weight capacity of 11 lbs (5 kg) per stand. Overloading can cause instability and damage.
- Assemble the stands on a flat, stable surface.
- Udržujte malé části mimo dosah dětí, abyste předešli nebezpečí udušení.
- Pravidelně kontrolujte všechny spoje a upevňovací prvky, abyste se ujistili, že jsou bezpečné.
- Place stands in a low-traffic area to minimize the risk of accidental bumps or tipping.
Obsah balení
Zkontrolujte prosím, zda jsou ve vašem balení obsaženy všechny následující komponenty:
- Speaker Stand Bases (2)
- Lower Support Tubes (2)
- Upper Adjustable Tubes (2)
- Speaker Mounting Plates/Brackets (2 sets)
- Height Adjustment Knobs (2)
- Assorted Screws and Washers for Speaker Attachment
- Stahovací pásky (pro správu kabelů)
- Návod k použití
Nastavení a montáž
Follow these steps to assemble your speaker stands:
- Attach the Lower Support Tube to the Base: Securely fasten the lower support tube to the heavy-duty triangle base using the provided screws. Ensure it is tightened for maximum stability.
- Insert the Upper Adjustable Tube: Slide the upper adjustable tube into the lower support tube.
- Attach the Speaker Mounting Plate: Secure the speaker mounting plate to the top of the upper adjustable tube.
- Attach Your Speaker: The MD5401 stands offer multiple attachment options for various speaker types. Identify the appropriate method for your speaker:
Image: Speaker attachment methods, including flat panel hole, inset hole, and keyhole options.
- Hole on Flat Panel: Use the provided screws to attach speakers with a flat back panel and a screw hole.
- Inset Hole: For speakers with an inset screw hole, use the appropriate screw and spacer.
- Klíčová dírka: For speakers with a keyhole slot, align and secure the speaker using the keyhole attachment.
Poznámka: The metric screws included may not fit Samsung HW-Q90R speakers. For Samsung Q-series Rear Speakers, please refer to speaker stand MD5402.
Image: Recommended speaker size and mounting plate dimensions for compatibility.
- Správa kabelů: Utilize the built-in cable hole (0.6" W x 1.2" H) to route speaker wires for a clean and organized appearance. Use the included cable ties to secure the wires along the stand tube.
Image: Detail of the cable management system with a cable routed through the stand.
Provoz a použití
The MD5401 speaker stands are designed for easy height adjustment and stable placement.
- Nastavení výšky: The extendable tube allows for height adjustment up to a maximum of 39 inches. Loosen the height adjustment knob, slide the upper tube to your desired height, and then securely tighten the knob to lock it in place. This allows for optimum acoustics based on your listening position.
Image: Visual guide for adjusting the speaker stand height.
Image: Speakers positioned at optimal listening height for an immersive audio experience.
- Stabilní umístění: The heavy-duty cast iron base provides excellent stability on various floor types, including carpet, hardwood, and tile. Anti-slip pads are included to prevent scratching your floor.
Image: The stable base of the speaker stand on various floor surfaces.
Image: The speaker stand demonstrating its stability and 11 lbs weight capacity.
Údržba
To ensure the longevity and optimal performance of your speaker stands, follow these simple maintenance guidelines:
- Čištění: Wipe the stands with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp Lze použít hadřík a ihned osušit. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Kontrola upevňovacích prvků: Pravidelně kontrolujte všechny šrouby a spoje, zda jsou pevně utažené. V případě potřeby je dotáhněte pro zachování stability.
- Kontrola kabelů: Check speaker cables for any signs of wear or damage, especially where they pass through the cable management hole. Replace damaged cables immediately.
Odstraňování problémů
If you encounter any issues with your speaker stands, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Stojan se chvěje nebo je nestabilní. | Volné spoje; nerovná podlaha; přetížení. | Ensure all screws are tightened. Move to a flat surface. Verify speaker weight is within 11 lbs capacity. |
| Speaker does not attach securely. | Incorrect screw size; incompatible speaker hole type. | Use the correct screws and attachment method for your speaker (flat panel, inset, keyhole). Refer to the 'Setup and Assembly' section. |
| Height adjustment knob does not tighten. | Knob or threading is stripped/damaged. | Pro náhradní díl kontaktujte zákaznickou podporu. |
| Cables do not fit through the cable hole. | Cable is too thick. | The cable hole is 0.6" W x 1.2" H. If your cable is thicker, external cable management may be necessary. |
Specifikace
- Model: MD5401
- Značka: Montáž sen
- Materiál: Cast Iron (Base), Steel (Tubes)
- Barva: Černý
- Nosnost: Až 5 kg na stojan
- Nastavitelná výška: Max. 39 palce
- Rozměry produktu: 48.11 x 11.06 x 11.06 palců (smontované, přibližné)
- Hmotnost položky: 8.1 liber (za pár)
- Cable Management Hole Dimensions: 0.6 palce (Š) x 1.2 palce (V)
Záruka a zákaznická podpora
Mounting Dream is committed to providing high-quality products and excellent customer service.
- Zákaznická podpora v USA: Our team is available to provide pre-sale and after-sale support, as well as consulting services on product use and installation.
- Záruka: Please refer to the product packaging or official Mounting Dream webna stránce pro konkrétní podrobnosti o záruce.
- Kontaktní údaje: For assistance, please visit the official Mounting Dream webwebu nebo kontaktujte jejich zákaznickou linku.
