1. Úvod
Tato příručka obsahuje podrobné pokyny pro instalaci, provoz a údržbu vašeho Webasto 1533 Digital Timer. This timer is designed to control Webasto Thermo Top C heaters, allowing for convenient pre-programming of heating cycles. Please read this manual thoroughly before using the device to ensure proper function and safety.
2. Bezpečnostní informace
- Always ensure the vehicle's power supply is disconnected before attempting any installation or maintenance.
- Installation should ideally be performed by a qualified technician to prevent damage to the device or vehicle.
- Do not expose the timer to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Používejte pouze originální Webasto replacement parts and accessories.
3. Konec produktuview
The Webasto 1533 Digital Timer is an oval-shaped control unit featuring an LCD display and intuitive buttons for setting time and programming heating functions. It allows users to schedule heater operation in advance.
Obrázek 3.1: Přední view z Webasto 1533 Digital Timer, showing the oval shape, LCD display with '7:30' and a flame icon, and control buttons (up, down, set, flame/heater icon, fan icon).
Obrázek 3.2: The Webasto 1533 Digital Timer displayed with its original packaging, a foam gasket, and a mounting screw. The packaging indicates multilingual labels for 'Digital timer 1533'.
4. Instalace a nastavení
The Webasto 1533 Digital Timer is designed for integration with your vehicle's Webasto Thermo Top C heating system. Proper installation is crucial for optimal performance.
4.1 Montáž časovače
- Select a suitable location within the vehicle cabin that is easily accessible to the driver and away from direct heat or moisture.
- Ensure there is sufficient space behind the mounting surface for the electrical connector.
- Use the provided mounting screw to secure the timer in place.
4.2 Elektrické připojení
The timer connects to the heater control unit via a dedicated wiring harness (not included, may need to be purchased separately). Refer to your heater's installation manual for specific wiring diagrams.
Obrázek 4.1: Zadní view z Webasto 1533 Digital Timer, showing the product label with model number '1322580A' and the 4-pin electrical connector.
Obrázek 4.2: Close-up of the 4-pin electrical connector on the rear of the Webasto 1533 Digital Timer, highlighting the gold-plated pins for connection to the wiring harness.
- Connect the 4-pin connector from the wiring harness to the corresponding port on the back of the timer. Ensure a secure fit.
- Once connected, restore power to the vehicle. The timer display should illuminate.
4.3 Nastavení hodin
- Stiskněte tlačítko SOUBOR knoflík. Začnou blikat číslice hodin.
- Použijte < a > tlačítka pro nastavení hodiny.
- Stiskněte SOUBOR znovu. Číslice minut budou blikat.
- Použijte < a > tlačítka pro nastavení minut.
- Stiskněte SOUBOR a third time to confirm the time.
5. Návod k obsluze
5.1 Manual Heater Activation
To manually turn on the heater, press the flame/heater icon button. The heater will start and operate for a preset duration (typically 30 minutes, adjustable via heater settings).
5.2 Programming a Heating Time
The timer allows you to program up to three different start times for your heater.
- Stiskněte tlačítko SOUBOR button repeatedly until 'P1' (Program 1) appears on the display.
- Stiskněte SOUBOR again. The hour digits for P1 will flash.
- Použijte < a > buttons to set the desired hour.
- Stiskněte SOUBOR. The minute digits for P1 will flash.
- Použijte < a > tlačítky nastavte požadované minuty.
- Stiskněte SOUBOR to confirm P1.
- Repeat steps 1-6 for P2 and P3 if additional programs are desired.
- To activate a program, press the flame/heater icon button until the desired program (P1, P2, or P3) is displayed and the flame icon is solid. The heater will start at the programmed time.
5.3 Deactivating a Program
To deactivate an active program, press the flame/heater icon button until the flame icon disappears from the display.
6. Údržba
The Webasto 1533 Digital Timer requires minimal maintenance.
- Čištění: Otřete displej a casing s měkkým, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
- Baterie: The timer does not contain user-replaceable batteries for its primary function. Power is supplied by the vehicle's electrical system.
7. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Displej je prázdný | Žádné napájení; uvolněné připojení | Check vehicle's power supply and timer's electrical connection. |
| Heater does not start at programmed time | Program not activated; incorrect time setting; heater fault | Ensure program is active (flame icon solid). Verify current time and programmed time. Check heater for other faults. |
| Tlačítka nereagují | Temporary software glitch; physical damage | Disconnect and reconnect power to reset. If problem persists, contact technical support. |
8. Specifikace
| Funkce | Detail |
|---|---|
| Značka | Webast |
| Číslo modelu | 1322580A |
| Compatible Heaters | Webasto Thermo Top C (12V) |
| Rozměry (D x Š x V) | 11.2 x 8.1 x 3.8 cm |
| Hmotnost položky | 98 g |
| Napájení | 12V (from vehicle) |
9. Záruka a podpora
Tento Webasto 1533 Digital Timer is a genuine Webasto part, ensuring quality and compatibility with your heating system. For warranty information, please refer to the documentation provided with your original heater or contact your Webprodejce asto.
Technical support is available for assistance with installation, operation, or troubleshooting. Please contact your authorized Webasto service partner or visit the official Webast webkontaktní údaje podpory naleznete na webu.
