Návod k obsluze kamen na dřevo Supra VERCORS 3

1. Úvod

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Supra VERCORS 3 wood-burning stove. Please read all instructions carefully before attempting to install or use the appliance. Proper installation and maintenance are crucial for optimal performance and safety.

Obrázek 1: Přední strana view of the Supra VERCORS 3 wood-burning stove in operation. This image shows the stove's design, including the glass door revealing the burning wood, and the top flue connection.

2. Bezpečnostní informace

Your safety is paramount. Failure to follow these safety guidelines can result in property damage, serious injury, or death. Always adhere to local and national building and fire codes.

• Profesionální instalace: Installation must be performed by a qualified professional in accordance with all applicable local and national building and fire codes.
• Větrání: Ensure adequate ventilation in the room where the stove is installed to prevent carbon monoxide buildup.
• Vůle: Maintain required clearances from combustible materials (walls, furniture, curtains, etc.) as specified in the installation instructions.
• Typ paliva: Use only dry, seasoned hardwood as fuel. Never burn treated wood, trash, plastics, or flammable liquids.
• Dozor: Nikdy nenechávejte kamna během provozu bez dozoru.
• Děti a domácí mazlíčci: Keep children and pets away from the hot surfaces of the stove. The stove's exterior can reach very high temperatures.
• Hasicí přístroj: Keep a fire extinguisher readily accessible.
• Detektor oxidu uhelnatého: Install and regularly check a carbon monoxide detector in the vicinity of the stove.

3. Nastavení a instalace

The Supra VERCORS 3 wood-burning stove requires careful installation to ensure safe and efficient operation. It is highly recommended that installation be carried out by a certified professional.

3.1 Příprava místa

• Krb: The stove must be placed on a non-combustible hearth that extends beyond the stove's footprint according to local regulations.
• Strukturální podpora: The stove weighs approximately 205 kg (451.95 lbs). Ensure the floor structure can safely support this weight.
• Rozměry: Consider the stove's dimensions (72 cm width x 44.5 cm depth x 81.5 cm height) when planning placement.

3.2 Připojení komína a kouřovodu

• Komínový systém: Connect the stove to a suitable, properly sized, and maintained chimney system.
• Exhaust Diameter: The stove requires a 15 cm (approximately 5.9 inches) diameter exhaust connection.
• Potrubí spalin: Use appropriate flue pipes and connectors, ensuring all joints are sealed and secure.

Figure 2: The Supra VERCORS 3 wood-burning stove installed in a room, demonstrating its typical placement and connection to a vertical flue pipe. This image provides context for installation within a home environment.

4. Návod k obsluze

Follow these steps for safe and efficient operation of your wood-burning stove.

4.1 Fueling the Stove

• Doporučené palivo: Use only dry, seasoned hardwood. Wood should be split and seasoned for at least 6-12 months.
• Načítání: Open the stove door slowly to prevent smoke spillage. Place a small amount of crumpled newspaper or firelighters, followed by small kindling, then progressively larger pieces of wood. Do not overfill the firebox.

4.2 Založení ohně

1. Ensure all air intake vents are fully open.
2. Ignite the newspaper/firelighters.
3. Leave the stove door slightly ajar for a few minutes to establish a strong draft, then close it securely.
4. Once the fire is burning steadily, gradually add larger pieces of wood.

4.3 Controlling the Burn

• Přívod vzduchu: Adjust the air intake controls to regulate the burn rate and heat output. Closing the air intake will slow the burn; opening it will increase it.
• Optimal Burn: Aim for a steady, bright flame. Excessive smoke indicates an inefficient burn or wet wood.

5. Údržba

Regular maintenance ensures the longevity and safe operation of your Supra VERCORS 3 stove.

• Odstraňování popela: Regularly remove ash from the ash pan. Do not allow ash to build up to the level of the grate, as this can restrict airflow and damage the grate. Dispose of hot ashes in a metal container with a tight-fitting lid, away from combustible materials.
• Čištění komínů: The chimney and flue pipe should be inspected and cleaned at least once a year, or more frequently depending on usage and fuel type. Creosote buildup is a fire hazard.
• Čištění skla: Clean the stove glass with a specialized glass cleaner designed for wood stoves when the stove is completely cool. Avoid abrasive cleaners.
• Těsnění dveří: Inspect the door gasket periodically for wear and tear. A worn gasket can lead to air leaks and reduced efficiency. Replace if necessary.
• Generální inspekce: Annually inspect the stove for any signs of damage, cracks, or loose components.

6. Řešení problémů

This section addresses common issues you might encounter with your wood-burning stove.

6.1 Smoke Entering the Room

• Příčina: Insufficient draft, blocked chimney, or opening the door too quickly.
• Řešení: Ensure chimney is clear of obstructions. Check that air vents are open. Open the stove door slowly. Consider pre-heating the flue if the stove is cold.

6.2 Poor Burn or Low Heat Output

• Příčina: Wet wood, insufficient air supply, or chimney issues.
• Řešení: Use only dry, seasoned wood. Ensure air intake vents are fully open. Check for creosote buildup in the chimney.

6.3 Excessive Creosote Buildup

• Příčina: Burning wet wood, restricted air supply, or low burning temperatures.
• Řešení: Burn only dry wood. Ensure adequate air supply for a hot, clean burn. Have the chimney cleaned regularly.

7. Specifikace

8. Záruka a podpora

For warranty details, technical support, or replacement parts, please refer to the documentation provided at the time of purchase. You may also contact Supra customer service directly through their official webmístě nebo autorizovaným distributorům.

Keep your purchase receipt and model number (VERCORS3) readily available when contacting support.