1. Konec produktuview
These replacement filters are designed for various Electrolux canister vacuum cleaner models. Their primary function is to capture dust, allergens, and other airborne particles, ensuring cleaner exhaust air and maintaining optimal vacuum performance. Regular replacement of these filters is essential for effective filtration and to prolong the life of your vacuum cleaner.
Image: Two white vacuum cleaner filters, illustrating the design for top-mounted after-filter systems.
2. Kompatibilita
These filters are compatible with Electrolux canister vacuum cleaners that utilize a top-mounted after-filter system. Please verify your vacuum model before installation.
Kompatibilní modely zahrnují mimo jiné:
- Electrolux Hi-Tech 2100 & LE MODELS
- Electrolux Canister vacuums HT-2100
- Limitovaná edice
- Epic 6000, Epic 5000, Epic 6500
- Regency
- Ambassador, Ambassador I, II & III
- Diplomat
- Lux 7000, Lux Classic & Legacy, Lux 6000, Lux 3000
Poznámka: These filters are not compatible with Electrolux Guardian 9000 and Epic 8000 models.
3. Nastavení a instalace
Follow these steps to replace the filter in your Electrolux canister vacuum cleaner:
- Step 1: Power Off and Unplug: Ensure your Electrolux canister vacuum cleaner is turned off and unplugged from the power outlet before beginning any maintenance.
- Step 2: Locate Filter Compartment: Refer to your vacuum cleaner's original manual to locate the top-mounted after-filter compartment. This is typically found near the motor or exhaust area.
- Step 3: Remove Old Filter: Carefully open the filter compartment and remove the used filter. Dispose of the old filter according to local waste disposal guidelines.
- Step 4: Insert New Filter: Place the new replacement filter into the compartment, ensuring it is seated correctly and securely. The filter should fit snugly to prevent air bypass.
- Step 5: Close Compartment: Close the filter compartment cover firmly until it latches. Ensure all latches are engaged to maintain a proper seal.
- Krok 6: Zkušební provoz: Plug in and turn on your vacuum cleaner to confirm proper operation and air flow. Listen for any unusual noises or air leaks.
4. Údržba
Regular filter replacement is crucial for maintaining the performance and longevity of your Electrolux vacuum cleaner. These filters are designed for single-use and should be replaced when visibly dirty or when vacuum performance decreases.
- Frekvence výměny: Replace filters every 3 to 6 months, or more frequently with heavy use or if you have pets.
- Inspekce: Periodically inspect the filter for dirt buildup, tears, or damage. A clogged filter can reduce suction power and potentially release dust back into the air.
5. Řešení problémů
If you encounter issues after filter replacement, refer to the table below:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Snížený sací výkon | Ucpaný nebo nesprávně nainstalovaný filtr | Replace filter; ensure correct installation and proper seating within the compartment. |
| Neobvyklý zápach z vysavače | Dirty or old filter | Replace filter immediately. |
| Vysavač unikajícího prachu | Filter not seated correctly or damaged filter | Reinstall filter, ensuring a tight seal; inspect for damage and replace if necessary. |
6. Specifikace
- Materiál: Plast
- Barva: Bílá
- Počet kusů: 6 filters per pack
- Compatible Device Type: Canister Vacuum
- Hmotnost položky (v balení): Přibližně 3.52 unce
- Rozměry balení: Přibližně 10.31 x 6.61 x 1.61 palce
- Obecné číslo dílu: 26-2311-09
7. Důležité bezpečnostní informace
- Always unplug the vacuum cleaner from the power outlet before installing, replacing, or performing any maintenance on filters.
- Do not attempt to wash or reuse disposable filters, as this can damage the filter material and significantly reduce its effectiveness.
- Keep replacement filters out of reach of children and pets.
- Use only filters designed for your specific vacuum model to ensure proper fit, optimal performance, and to prevent damage to your appliance.
