VDO M1.1 WL Digital Bicycle Computer Speedometer User Manual

Zavedení

The VDO M1.1 WL Digital Bicycle Computer is a reliable and user-friendly device designed to provide essential cycling data. Its minimalist design ensures ease of use, while its clear display keeps two key functions visible at all times. This manual provides detailed instructions for installation, operation, and maintenance of your VDO M1.1 computer.

Obsah balení

Ujistěte se prosím, že balení obsahuje všechny následující komponenty:

• VDO M1.1 Bicycle Computer Unit
• Bicycle Mounting Kit (includes bracket, sensor, magnet, and zip ties)
• 3V Battery (CR2032)
• Uživatelská příručka

Nastavení a instalace

Follow these steps to properly install your VDO M1.1 Bicycle Computer:

1. Instalace baterie: Open the battery compartment on the back of the computer unit. Insert the included 3V CR2032 battery with the positive (+) side facing up. Close the compartment securely.
2. Montážní držák: Attach the mounting bracket to your bicycle's handlebar or stem using the provided zip ties. Ensure it is securely fastened and positioned for easy viewIng.
3. Instalace senzoru: Mount the speed sensor to the front fork of your bicycle. Position it so that the sensor head is aligned with the spokes.
4. Instalace magnetu: Attach the spoke magnet to one of the spokes on your front wheel. Adjust its position so that it passes within 5mm of the speed sensor head with each wheel rotation. Ensure the magnet and sensor are aligned.
5. Vedení kabelů: Route the sensor cable along the fork and frame, securing it with zip ties to prevent it from interfering with moving parts or getting snagged. Connect the cable to the computer mounting bracket.
6. Připojení k počítači: Slide the VDO M1.1 computer unit onto the mounting bracket until it clicks into place.
7. Nastavení velikosti kola: It is crucial to set the correct wheel size for accurate speed and distance readings. Refer to the 'Settings Mode' section to input your wheel's circumference. You can measure your wheel's circumference manually for the most accurate result.

Image: The VDO M1.1 WL Digital Bicycle Computer showing a speed of 15.6 km/h and a trip time of 2 hours, 18 minutes, and 48 seconds. The display is clear with large digits, and the VDO logo is visible at the top.

Návod k obsluze

The VDO M1.1 features two primary buttons for operation and settings:

• BIKE Button:
  • V provozním režimu: Press to cycle through different functions (e.g., trip time, daily distance, total distance). Press and hold to reset trip-specific data (e.g., daily distance, trip time).
  • In Setting Mode: Use to browse through the setting menu options and to change the data value that is currently being set.
• Tlačítko SET:
  • V provozním režimu: Press to return to the main speed display from any other function. Press and hold to enter the setting mode.
  • In Setting Mode: Use to open a setting option or to confirm your selected setting.

The computer features an automatic start/stop function that activates after 2 hours of inactivity. Data is stored even when the battery is changed.

Funkce

The VDO M1.1 provides the following essential cycling functions:

• Current Speed (displayed in 0.2 km/h increments)
• Čas cesty
• Daily Distance
• Celková vzdálenost
• Time (12/24-hour mode with AM/PM display)

Mezi další funkce patří:

• Very large, easy-to-read fonts
• Two functions visible simultaneously on the display
• Full text display (English language supported)
• Data storage upon battery change (retains data and settings)
• Low battery status warning
• One adjustable wheel size setting
• Automatic start/stop function (up to 2 hours of inactivity)

Údržba

To ensure the longevity and optimal performance of your VDO M1.1 Bicycle Computer, follow these maintenance guidelines:

• Čištění: Wipe the computer unit and sensor with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit displej neboasing.
• Výměna baterie: When the low battery warning appears, replace the 3V CR2032 battery promptly. The computer is designed to retain your data and settings during battery changes.
• Skladování: If storing the bicycle for an extended period, consider removing the computer unit to protect it from extreme temperatures or moisture.
• Zarovnání senzoru/magnetu: Periodically check the alignment of the speed sensor and spoke magnet to ensure they are still within the recommended 5mm distance for accurate readings.

Odstraňování problémů

If you encounter issues with your VDO M1.1, refer to the following common problems and solutions:

• No Speed Reading / Inaccurate Readings:
  • Check the alignment and distance between the speed sensor and the spoke magnet. They should be within 5mm.
  • Ensure the sensor cable is securely connected to the mounting bracket and is not damaged.
  • Verify that the wheel size setting is correct in the computer's settings.
• Display Not Working / Faint Display:
  • Check the battery. If the low battery warning is active or the display is faint, replace the 3V CR2032 battery.
  • Ujistěte se, že je baterie vložena správně kladným (+) pólem nahoru.
• Computer Not Responding to Buttons:
  • Vyjměte a znovu vložte baterii, abyste provedli měkký reset.
  • Ujistěte se, že tlačítka nejsou zaseknutá nebo zablokovaná.

If problems persist, please contact VDO customer support or your retailer for further assistance.

Specifikace

Záruka a podpora

For warranty information, please refer to the warranty card included with your product or consult the retailer from whom you purchased the VDO M1.1. VDO stands behind the quality of its products.

For technical support, troubleshooting assistance, or inquiries about replacement parts, please visit the official VDO webnebo se obraťte na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi pro případné reklamace.