Evenflo Chase Harnessed Booster Instruction Manual

Konec produktuview

The Evenflo® Chase® Harnessed Booster is a versatile 2-in-1 car seat designed to grow with your child, accommodating weights from 22 to 110 lbs. It transitions from a 5-point harnessed seat to a belt-positioning booster, offering extended use. Key features include an innovative headrest design that self-adjusts to your child’s height in booster mode, enhanced side walls and head support for comfort and safety, and integrated cup holders with a flexible stripe design.

Obrázek 1: Přední strana view of the Evenflo Chase Harnessed Booster in Jubilee color.

Rozměry a hmotnost

• Rozměry produktu: 18 x 18.5 x 29.5 palce
• Hmotnost položky: 9.14 libry
• Doporučená minimální hmotnost: 22 libry
• Maximální hmotnost Doporučení: 110 libry
• Minimum Height Recommendation: 28 palce
• Doporučená maximální výška: 57 palce

Figure 2: Product dimensions of the Evenflo Chase Harnessed Booster.

Nastavení

The Evenflo Chase Harnessed Booster requires minimal assembly. The main car seat unit comes pre-assembled. The primary setup involves attaching the cup holders and securing the seat in your vehicle.

1. Attaching Cup Holders

The car seat includes two integrated cup holders. These snap into designated slots on either side of the seat. Once snapped into place, secure them using small Phillips head screws (provided) from the bottom of the seat.

Figure 3: Attaching the integrated cup holders to the car seat.

2. Securing the Car Seat in Your Vehicle (Harnessed Mode)

This car seat is designed for front-facing installation only. It is equipped with LATCH (Lower Anchors and Tethers for Children) connectors for easy installation and transfer between vehicles. The seat also features three-point connections for secure strapping.

• Locate the LATCH anchors in your vehicle's back seat.
• Attach the LATCH connectors from the car seat to the vehicle's anchors.
• Ensure the car seat is tightly secured and does not move more than one inch side-to-side or front-to-back at the belt path.
• For additional security, utilize the top tether strap, attaching it to the vehicle's top tether anchor point.

Obrázek 4: Strana view of the car seat, highlighting the LATCH system for secure installation.

Figure 5: The top tether strap on the back of the car seat for added stability.

Návod k obsluze

1. Adjusting the 5-Point Harness

The 5-point harness system ensures a snug and secure fit for your child. The harness features a central, front-access adjuster for ease of use.

• To loosen the harness, press the release button located near the crotch buckle and pull the shoulder straps forward.
• To tighten the harness, pull the adjustment strap located at the front of the seat until the harness is snug against your child's body. Ensure the chest clip is positioned at armpit level.
• The headrest and shoulder strap height can be adjusted by squeezing the button on the back of the seat and sliding the headrest up or down.

Figure 6: Adjusting the headrest and harness height for a proper fit.

Obrázek 7: Detail view of the harness buckle and the strap used for tightening.

2. Converting to Belt-Positioning Booster Mode

For older children (at least four years of age and meeting weight/height requirements), the car seat converts to a belt-positioning booster. The 5-point harness can be removed, and the vehicle's seat belt is used to secure the child.

• Refer to the detailed instructions in the full user manual for safe removal of the 5-point harness.
• Once the harness is removed, the vehicle's shoulder belt will self-adjust to your child's height through the designated belt path on the booster seat's headrest.
• Ensure the lap belt is low on the hips, touching the thighs, and the shoulder belt crosses the center of the child's chest and shoulder.

Figure 8: A child comfortably seated in the booster mode, secured by the vehicle's seatbelt.

Údržba

Regular cleaning and maintenance will ensure the longevity and hygiene of your Evenflo Chase Harnessed Booster.

• Plastové a kovové díly: Wipe clean with mild soap and water. Dry with a soft cloth. Do not use abrasive cleaners or solvents.
• Postroj: Wipe clean with mild soap and water. Allow harness to air dry completely.
• Sedací podložka: The seat pad is machine washable. Wash separately in cold water on a gentle cycle. Tumble dry for 10 to 15 minutes on low heat.
• Přezka: Place the buckle in a cup of warm water and gently agitate. To avoid damage, do not clean the buckle with soap or detergents and do not use a lubricant.

Figure 9: The seat pad can be machine washed, and other parts can be wiped clean.

Odstraňování problémů

If you encounter any issues with your Evenflo Chase Harnessed Booster, please refer to the following common solutions or consult the full user manual for more detailed guidance.

• Příliš těsný/volný postroj: Ensure the harness adjustment strap is used correctly and the chest clip is at armpit level.
• Seat not secure in vehicle: Re-check LATCH connections and top tether. Apply pressure to the seat while tightening the straps.
• Cup holders not staying in place: Verify they are snapped in correctly and the Phillips head screws are tightened.

Specifikace

Záruka a podpora

For detailed warranty information and customer support, please refer to the official Evenflo Chase Harnessed Booster User Manual. You can download the PDF version of the manual from the following link:

Stáhnout uživatelskou příručku (PDF)

For further assistance, please visit the official Evenflo webnebo kontaktujte jejich zákaznický servis.