Důležité bezpečnostní informace
VAROVÁNÍ: To reduce potential electrical shock, always disconnect power before servicing this fan motor. Follow all national and local electrical codes for proper grounding. Individually insulate any unused lead wires to prevent electrical hazards.
Nedodržení těchto pokynů může mít za následek vážné zranění, smrt nebo poškození majetku.
Konec produktuview
The Genteq K48HXFCM-3726 / 1086486 is a high-quality condenser fan motor designed for various HVAC applications, including ICP, Heil, Tempstar, and Comfort Maker units. This motor is a critical component for maintaining proper airflow and cooling efficiency in your system.
Klíčové vlastnosti:
- 1/5 Horsepower (HP)
- Operates at 208-230 Volts (V)
- Rotational Speed of 1075 Revolutions Per Minute (RPM)
- Part Number: 1086486 (also HQ1086486EM & Emerson # K48HXFCM-3726)
- 5-inch diameter (Frame 42Y)
- 2-inch shaft extension
- Tepelně chráněno
- Air Over Cont (Air Over Continuous) design
Obrázek 1: The Genteq K48HXFCM-3726 fan motor. This image shows the dark gray motor body, the central shaft extending upwards, and the red, black, and brown electrical wires connected to a white terminal block. A product label with specifications and warnings is visible on the side of the motor.
Specifikace
| Značka | Genteq |
| Název modelu | tempstar (K48HXFCM-3726 / 1086486) |
| koňská síla (HP) | 1 / 5 HP |
| svtage | 208-230 voltů |
| Rychlost | 1075 ot./min |
| Frekvence | 60 Hz |
| Ampvymazat | 1.08 Amp |
| Fáze | 1 fáze |
| Číslo dílu | 1086486 / K48HXFCM-3726 |
| Velikost rámu | 42Y |
| Materiál | Měď |
| Výrobce | ICP / Heil / Tempstar (Motor by NIDEC Motor Corporation) |
| UPC | 751109532199 |
Nastavení a instalace
Installation of the Genteq K48HXFCM-3726 fan motor should only be performed by a qualified HVAC technician. Improper installation can lead to electrical shock, fire, or damage to the unit.
- Odpojení napájení: Ensure all power to the HVAC unit is completely disconnected at the circuit breaker before beginning any work. Verify with a voltage tester.
- Přístup ke starému motoru: Carefully remove the access panels and components necessary to reach the existing fan motor. Note the orientation and wiring of the old motor.
- Demontáž starého motoru: Disconnect all electrical wiring and mounting hardware from the old motor. Carefully remove it from the unit.
- Montáž nového motoru: Install the new Genteq motor using the appropriate mounting hardware. Ensure it is securely fastened and properly aligned with the fan blade. The motor is 5" in diameter (Frame 42Y) and the shaft extends 2" out.
- Připojení kabeláže: Connect the electrical wires to the new motor according to the wiring diagram of your HVAC unit. Pay close attention to voltage (208-230V) and phase (1 Phase) requirements. Důležité: Individually insulate any unused lead wires to prevent short circuits or electrical hazards.
- Nástavec lopatky ventilátoru: Securely attach the fan blade to the motor shaft. Ensure the blade is balanced and spins freely without obstruction.
- Znovu sestavte jednotku: Replace all access panels and components that were removed.
- Testovací provoz: Restore power to the HVAC unit. Test the fan motor's operation to ensure it starts, runs smoothly, and provides adequate airflow. Monitor for any unusual noises or vibrations.
Návod k obsluze
Once properly installed, the Genteq K48HXFCM-3726 fan motor operates automatically as part of your HVAC system's cooling or heating cycle.
- Ensure your thermostat is set to the desired mode (e.g., Cool, Heat, Fan On).
- The motor will engage when the system calls for fan operation to circulate air or dissipate heat from the condenser coil.
- Listen for smooth operation. Any unusual grinding, squealing, or rattling noises may indicate an issue.
Údržba
Regular maintenance helps ensure the longevity and efficient operation of your fan motor. Always disconnect power before performing any maintenance.
- Roční kontrola: Have a qualified HVAC technician inspect the motor and fan assembly annually.
- Čištění: Periodically clean any dust, dirt, or debris from the motor housing and fan blades. Accumulation can lead to overheating and reduced efficiency. Use a soft brush or vacuum.
- Zkontrolujte připojení: Ujistěte se, že všechny elektrické spoje jsou bezpečné a bez koroze.
- Shaft and Bearings: Check for any excessive play or wobble in the motor shaft. This motor is typically sealed and does not require lubrication. If unusual noises or vibrations occur, professional inspection is recommended.
- Proud vzduchu: Ensure that the area around the motor and fan is clear of obstructions to allow for proper airflow (Air Over Cont design).
Odstraňování problémů
If you experience issues with your fan motor, consider the following common troubleshooting steps. For complex issues, contact a qualified HVAC technician.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Motor se nespustí | No power, faulty wiring, seized bearings, faulty capacitor (if external) | Check circuit breaker. Verify wiring connections. Inspect motor for obstructions. Consult technician for internal issues or capacitor check. |
| Motor makes unusual noise (grinding, squealing) | Worn bearings, fan blade hitting obstruction, loose mounting | Disconnect power and inspect fan blade for obstructions. Check motor mounting. If noise persists, motor may need replacement. |
| Motor se přehřívá a vypíná | Poor airflow, excessive load, internal fault, dirty coils | Ensure clear airflow around motor and condenser coils. Check fan blade for balance. If problem persists, contact a technician. |
| Motor běží pomalu nebo slabě | Nízký objemtage, faulty capacitor (if external), partial winding short | Ověřte správný objemtage supply. A technician can test the capacitor and motor windings. |
Informace o záruce
Specific warranty terms for the Genteq K48HXFCM-3726 / 1086486 fan motor are provided by the manufacturer or the seller at the time of purchase. Please refer to your purchase documentation or contact the vendor directly for detailed warranty coverage, duration, and claim procedures.
Zákaznická podpora
For technical assistance, installation guidance, or troubleshooting beyond the scope of this manual, it is highly recommended to contact a certified HVAC professional or the manufacturer, Genteq.
- Výrobce: ICP / Heil / Tempstar (Motor by NIDEC Motor Corporation)
- Model produktu: K48HXFCM-3726 / 1086486
- UPC: 751109532199
- For general information, you may visit the NIDEC Motor Corporation webmísto: www.usmotors.com
