1. Úvod
This manual provides comprehensive instructions for the safe and correct installation, operation, and maintenance of your RICOO S5244 Full Motion TV Wall Mount. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The RICOO S5244 is designed to securely mount flat-panel televisions ranging from 32 to 55 inches, with a maximum weight capacity of 50 kg. It supports various VESA mounting patterns and offers full motion capabilities including swivel, tilt, and rotation for optimal viewing úhly.
Image 1.1: The RICOO S5244 Full Motion TV Wall Mount, shown in its compact, folded position.
2. Bezpečnostní informace
VAROVÁNÍ: Nesprávná instalace může vést k vážnému zranění osob a poškození majetku. Pokud těmto pokynům nerozumíte nebo máte pochybnosti o bezpečnosti instalace, obraťte se na kvalifikovaného instalatéra.
- Ujistěte se, že montážní povrch bezpečně unese celkovou hmotnost držáku a televizoru.
- Use only the provided hardware. Do not use the wall anchors for drywall or plaster walls; they are intended for solid concrete walls only.
- Nepřekračujte maximální nosnost 50 kg (110 lb).
- Always check the VESA pattern of your TV before installation to ensure compatibility.
- Během instalace držte děti a domácí zvířata mimo dosah.
3. Obsah balení
Verify that all components are present and undamaged before proceeding with installation. Refer to the parts list in your packaging for a complete inventory.
4. Nastavení a instalace
4.1 Kontrola před instalací
Before mounting, confirm the following:
- Hmotnost televizoru: Your TV must not exceed 50 kg (110 lbs).
- Kompatibilita VESA: Check the four mounting holes on the back of your TV. Measure the horizontal and vertical distance between them. The mount supports VESA patterns from 200x200 mm up to 400x400 mm.
Image 4.1: Illustration demonstrating how to measure VESA hole patterns on a television. The mount supports horizontal distances from 50mm to 400mm and vertical distances from 150mm to 400mm.
Image 4.2: Visual guide for compatible TV sizes (30-55 inches) and VESA patterns (100x100 to 400x400) for the S5244 mount.
4.2 Montáž nástěnné desky
- Determine the desired height and position for your TV. Use a stud finder to locate wall studs if mounting on wood stud walls.
- Place the wall plate against the wall at the desired height and use a level to ensure it is perfectly horizontal. Mark the drilling holes.
- Drill pilot holes according to the marked positions. For concrete walls, use a masonry drill bit and the provided concrete anchors. For wood studs, drill pilot holes directly into the center of the studs.
- Secure the wall plate to the wall using the appropriate screws and washers. Ensure all screws are tightened firmly.
4.3 Připevnění držáků televizoru k televizoru
- Opatrně položte televizor displejem dolů na měkký, čistý povrch, abyste zabránili poškození obrazovky.
- Attach the two vertical TV brackets to the back of your television using the screws that fit your TV's VESA holes. Ensure the brackets are centered and securely fastened. Do not overtighten.
4.4 Mounting the Television to the Wall Plate
- With assistance, carefully lift the television with the attached brackets.
- Zavěste držáky televizoru na nástěnnou desku. Ujistěte se, že je televizor bezpečně upevněn na nástěnné desce.
- Engage any safety locking mechanisms on the brackets to prevent accidental dislodgement.
5. Operating the TV Wall Mount
The RICOO S5244 offers flexible viewing options through its full motion capabilities.
5.1 Nastavení natočení
The mount allows for swiveling the TV up to 120 degrees (60 degrees left and 60 degrees right), depending on the TV size and wall clearance. Gently push or pull the TV to the desired angle.
Image 5.1: A television mounted on the S5244, demonstrating its ability to swivel up to 120 degrees for flexible viewIng.
5.2 Nastavení sklonu
The TV can be tilted +12 degrees upwards and -3 degrees downwards. Loosen the tilt adjustment knobs on the TV brackets, adjust to the desired angle, and then re-tighten the knobs to secure the position.
Image 5.2: The S5244 mount allowing a television to tilt up to 15 degrees (shown as 15 degrees up and 15 degrees down, but product specs state +12/-3 degrees).
5.3 Nastavení rotace
For fine-tuning the level of your TV after installation, the front plate allows for a rotation adjustment of +/-3 degrees. This helps correct any slight misalignment.
Image 5.3: Illustration of the +/-3 degree rotation adjustment feature for leveling the television.
5.4 Wall Distance
The mount allows the TV to be positioned at a minimum distance of 80 mm from the wall and extended up to 370 mm.
Image 5.4: Visual representation of the adjustable wall distance, from a minimum of 80mm to a maximum of 370mm.
6. Údržba
Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vašeho nástěnného držáku televizoru.
- Čištění: Otřete držák měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Pravidelné kontroly: Pravidelně kontrolujte všechny šrouby a spoje, zda jsou pevně utažené a bezpečné. V případě potřeby je dotáhněte.
- Hnutí: If the movement becomes stiff, apply a small amount of silicone-based lubricant to the articulating joints. Do not use oil-based lubricants.
7. Řešení problémů
If you encounter issues with your TV wall mount, refer to the following common solutions:
- TV není vodorovně: Use the +/-3 degree rotation adjustment feature to level the TV. Ensure the wall plate was installed level initially.
- Difficulty Moving TV: Check if any cables are snagged or if the tilt/swivel mechanisms are overtightened. Loosen slightly if needed. Ensure the TV weight is within the specified limit.
- Mount se zdá být uvolněný: Immediately remove the TV from the mount. Re-check all wall plate and TV bracket connections. Ensure the wall anchors are appropriate for your wall type and securely installed. If unsure, consult a professional.
8. Specifikace
| Funkce | Specifikace |
|---|---|
| Značka | RICOO |
| Číslo modelu | S5244 |
| Materiál | Slitina oceli |
| Barva | Černý |
| Kompatibilní velikosti TV | 32–55 palce (81–140 cm) |
| Maximální nosnost | 50 kg (110 lb) |
| Kompatibilita VESA | 200x200, 300x200, 300x300, 400x200, 400x400 mm |
| Otočný rozsah | Up to 120 degrees (+/-60 degrees) |
| Rozsah náklonu | +12 až -3 stupňů |
| Nastavení rotace | +/-3 stupňů |
| Vzdálenost od zdi | 80 mm (min) - 370 mm (max) |
| Typ montáže | Držák na zeď |
| Typ pohybu | Articulating, Swivel |
Image 8.1: Detailed technical drawing showing the dimensions and range of motion for the RICOO S5244 wall mount.
9. Záruka a podpora
Specific warranty information for the RICOO S5244 TV Wall Mount is not provided in this manual. For detailed warranty terms, product support, or to contact customer service, please visit the official RICOO webwebu nebo se podívejte na obal produktu.
For further assistance, you may visit the RICOO brand store on Amazon: RICOO Brand Store
