1. Úvod
Thank you for choosing the Teka E 1C CN Stainless Steel Sink. This manual provides essential information for the safe installation, proper operation, and effective maintenance of your new sink. Please read these instructions carefully before installation and retain them for future reference.

Image showing the overall design of the Teka E 1C CN single bowl stainless steel sink.
2. Bezpečnostní pokyny
- Před zahájením jakékoli instalace nebo údržby se vždy ujistěte, že je přívod vody uzavřen.
- It is recommended that installation be performed by a qualified professional to ensure proper sealing and connection.
- Během instalace používejte vhodné osobní ochranné prostředky, jako jsou rukavice a ochrana očí.
- Check for leaks thoroughly after installation and before regular use.
- Do not use corrosive or abrasive cleaning agents that could damage the stainless steel finish.
- Ensure proper ventilation when using sealants or adhesives.
3. Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:
- 1 x Teka E 1C CN Stainless Steel Sink
- 1 x Uživatelská příručka
4. Nastavení a instalace
This sink is designed for countertop installation. Follow these general steps for installation:
- Připravte pracovní desku: Measure and cut an opening in your countertop according to the sink's external dimensions (28 cm x 40.5 cm). Ensure the edges are smooth and clean.
- Naneste tmel: Apply a continuous bead of silicone sealant around the perimeter of the sink's flange that will contact the countertop.
- Umístění dřezu: Carefully lower the sink into the prepared countertop opening, ensuring it is properly aligned.
- Zajistěte dřez: Use the provided mounting clips (if included, or standard countertop sink clips) to secure the sink firmly to the underside of the countertop. Tighten evenly to ensure a good seal.
- Připojení instalatérství: Install the drain assembly (1 1/2 inch) and connect it to your household plumbing. Connect the faucet (not included) according to its manufacturer's instructions.
- Zkouška těsnosti: Turn on the water supply and fill the sink. Check all connections for any signs of leakage. Tighten connections as necessary.
5. Návod k obsluze
The Teka E 1C CN sink is designed for standard kitchen use. Simply use your faucet to control water flow and temperature. Ensure the drain stopper is properly seated when filling the sink and removed for drainage.
6. Údržba a čištění
To maintain the appearance and longevity of your stainless steel sink, follow these guidelines:
- Denní úklid: Clean the sink regularly with warm water, a mild detergent, and a soft cloth or sponge. Rinse thoroughly and dry with a clean cloth to prevent water spots and mineral buildup.
- Vyvarujte se brusiva: Do not use abrasive cleaners, steel wool, wire brushes, or scouring pads, as these can scratch the stainless steel surface.
- Chemikálie: Avoid prolonged contact with strong acids, alkalis, bleach, or harsh chemical cleaners, which can stain or corrode the stainless steel. If contact occurs, rinse immediately and thoroughly.
- Zabraňte vzniku skvrn: Do not leave wet sponges, tea bags, or other items that can cause stains on the sink surface for extended periods.
- Péče o odtok: Regularly clean the drain area to prevent blockages and odors.
7. Řešení problémů
Zde jsou některé běžné problémy a jejich možná řešení:
- Pomalé odvodnění:
- Zkontrolujte, zda je vypouštěcí zátka zcela otevřená.
- Odstraňte veškeré viditelné nečistoty z odtokového otvoru.
- If the issue persists, a blockage may be further down the plumbing. Consult a plumber if necessary.
- Skvrny/skvrny od vody:
- These are often caused by mineral deposits from hard water. Dry the sink thoroughly after each use.
- For existing spots, use a stainless steel cleaner or a solution of vinegar and water, then rinse and dry.
- úniky:
- Check all plumbing connections under the sink. Tighten any loose fittings.
- Inspect the sealant around the sink's edge. If damaged, reapply sealant.
- If leaks persist, professional assistance may be required.
8. Specifikace
| Značka | Teka |
| Číslo modelu | E 1C CN (10132001) |
| Materiál | 18/10 CN Stainless Steel |
| Dokončit | Matná nerezová ocel |
| Barva | Šedá |
| Rozměry produktu (D x Š x V) | 28 x 40.5 x 15 cm |
| Hmotnost | 1.66 kg |
| Hloubka mísy | 15 cm |
| Velikost odtoku | 1 1/2 palce |
| Způsob instalace | Pracovní deska |
| Tvar | Obdélník |
| Počet misek | 1 |
9. Záruka a podpora
For warranty information and customer support, please refer to the documentation provided with your purchase or contact your retailer. Teka strives to provide high-quality products and support.