Návod k obsluze ultrazvukové meteorologické stanice Furuno 200WX

Zavedení

The Furuno 200WX Ultrasonic Weather Station is an advanced, all-in-one sensor designed to provide essential weather readings with high precision and accuracy. It detects instantaneous changes in weather conditions and operates continuously, even in adverse environments. This station measures apparent and true wind speed and direction, air temperature, and wind chill temperature. It also integrates a 3-Axis solid-state compass and a 3-Axis Rate Gyro for superior compass and pitch/roll accuracy. The 200WX supports both CanBUS/NMEA2000 and NMEA 0183 connectivity, allowing direct connection to compatible marine navigation systems like NavNet TZtouch/NavNet 3D DRS Radar sensors. Power is supplied via the NMEA 2000 bus, facilitating flexible installation. Its UV-stabilized, compact, and fully waterproof housing is resistant to chemicals and sunlight, ensuring durability.

A white cylindrical device with a grey band, labeled 'AIRMAR WeatherStation® 200WX', designed for outdoor weather monitoring.

Nastavení

This section details the initial setup of your Furuno 200WX Ultrasonic Weather Station.

Vybalení a kontrola

• Opatrně vyjměte všechny součásti z obalu.
• Ověřte, zda jsou přítomny všechny dodané komponenty:
  • Furuno 200WX Ultrasonic Weather Station unit
  • Montážní hardware
  • Propojovací kabel
• Zkontrolujte všechny součásti, zda nevykazují známky poškození. V případě zjištění poškození kontaktujte zákaznickou podporu.

Mounting the Weather Station

The 200WX features a standard 1-inch mount, accommodating existing mounted hardware. Ensure the mounting location provides an unobstructed view of the sky for accurate readings.

1. Select a suitable mounting location, free from obstructions that could interfere with wind or precipitation measurements.
2. Secure the mounting hardware according to the provided instructions.
3. Attach the 200WX unit to the mounted hardware, ensuring it is firmly in place.

Elektrické připojení

The 200WX supports both CanBUS/NMEA2000 and NMEA 0183. Power is supplied from an NMEA 2000 bus.

1. Connect the provided cable to the NMEA 2000 port on the 200WX unit.
2. Connect the other end of the cable to your NMEA 2000 bus or compatible NavNet TZtouch/NavNet 3D DRS Radar sensor.
3. Ujistěte se, že všechna spojení jsou bezpečná a vodotěsná.

Návod k obsluze

The Furuno 200WX Ultrasonic Weather Station provides continuous weather readings with no moving parts. Data is converted and distributed throughout the NavNet TZtouch/NavNet 3D Ethernet network.

Získávání dat

• The unit automatically measures and transmits:
  • Apparent and True Wind Speed and Direction
  • Teplota vzduchu
  • Chladicí teplota větru
  • Barometrický tlak
• The integrated 3-Axis solid-state compass and 3-Axis Rate Gyro provide accurate compass and pitch/roll data.

Interfacing with Display Units

Connect your display unit (e.g., NavNet TZtouch/NavNet 3D) to the NMEA 2000 network to view the weather data. Refer to your display unit's manual for specific instructions on configuring data displays.

The system is designed for continuous operation, even in adverse weather conditions.

Údržba

The Furuno 200WX Ultrasonic Weather Station is designed for minimal maintenance due to its lack of moving parts.

Rutinní úklid

• Periodically inspect the unit for any accumulation of dirt, salt, or debris.
• Vyčistěte vnější část jednotky měkkým, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Ensure the ultrasonic transducers (located on the top of the unit) are clear of obstructions.

Ohledy na životní prostředí

The UV-stabilized, compact housing is fully waterproof and resistant to chemicals and sunlight, ensuring long-term durability in marine environments.

Odstraňování problémů

This section provides solutions to common issues you may encounter with your 200WX Weather Station.

No Data Displayed

• Zkontrolujte napájení: Ensure the NMEA 2000 bus is powered and the 200WX unit is receiving power.
• Připojení kabelů: Verify that the NMEA 2000 cable is securely connected to both the 200WX and the network.
• Konfigurace sítě: Confirm that your display unit is correctly configured to receive data from the NMEA 2000 network. Refer to your display unit's manual.

Inaccurate Wind Readings

• překážky: Check for any physical obstructions near the unit that could be interfering with wind flow (e.g., mast, rigging, other sensors).
• Místo montáže: Ensure the unit is mounted in a location with clear, undisturbed airflow.
• Čistota senzoru: Clean the ultrasonic transducers as described in the Maintenance section.

Incorrect Compass/Pitch/Roll Data

• Kalibrace: If available, perform a compass calibration procedure on your connected display unit or through the 200WX configuration.
• Magnetické rušení: Ensure the unit is not mounted too close to strong magnetic fields (e.g., large metal objects, electrical cables).

Specifikace

Záruka a podpora

For warranty information and technical support, please refer to the official Furuno website or contact your local Furuno dealer. Keep your purchase receipt and product serial number handy for any inquiries.

Další zdroje:

• Official Furuno Manuals
• Furuno Support Page

Související videa o produktech

The following videos provide additional information about weather stations and related products. Please note that these videos may feature different models or brands, but offer general insights into weather monitoring technology.