Uživatelská příručka herní základní desky ASUS Z170 PRO

1. Úvod

This manual provides detailed instructions for the installation, configuration, and maintenance of your ASUS Z170 PRO Gaming ATX Motherboard. This motherboard is designed to support 6th-generation Intel Core i7/i5/i3/Pentium/Celeron processors in the LGA1151 package. It features integrated graphics, memory, and PCI Express controllers, supporting onboard graphics output, two-channel (4-DIMM) DDR4 memory, and 16 PCI Express 3.0/2.0 lanes for robust performance.

2. Obsah balení

Ověřte, zda jsou v balení základní desky přítomny všechny níže uvedené položky. Pokud je některá položka poškozená nebo chybí, obraťte se na prodejce.

• Uživatelská příručka
• I / O štít
• SATA 6Gb/s cable(s) (4 cables included)
• Balení šroubů M.2
• CPU installation tool
• Podpora DVD
• SLI bridge
• 12 in 1 Cable Label (s)

3. Vlastnosti produktu

The ASUS Z170 PRO Gaming motherboard incorporates several features designed to enhance system performance and user experience:

• LGA1151 Socket: Supports 6th Generation Intel Core Desktop Processors with DDR4 memory compatibility.
• SupremeFX Audio: Provides high-fidelity audio output for an immersive sound experience.
• Intel Gigabit Ethernet with LANGuard: Offers high-speed, protected network connectivity.
• USB 3.1 Type A/C & M.2: Enables ultra-speedy data transfer for faster system responsiveness and gaming.
• Gamer's Guardian: Features highly-durable components and smart DIY features for enhanced longevity and ease of assembly.

4. Nastavení a instalace

Before installing any components, ensure your system is powered off and disconnected from the power outlet. Handle the motherboard by its edges to avoid static discharge.

4.1 Rozložení základní desky

Popis obrázku: This image displays a top-down view of the ASUS Z170 PRO Gaming motherboard. Key components visible include the LGA1151 CPU socket at the center, four DDR4 DIMM slots to its right, multiple PCIe expansion slots below the CPU, and various headers and connectors around the board's perimeter. The I/O panel is visible on the left edge, and the Z170 chipset heatsink with "PRO GAMING" branding is located at the bottom right.

4.2 Instalace CPU

The motherboard uses an LGA1151 socket. Carefully align the CPU with the socket, ensuring the golden triangle on the CPU matches the triangle on the socket. Lower the CPU gently into the socket without forcing it. Close the load plate and secure the retention lever.

Popis obrázku: Detailní záběr view of the LGA1151 CPU socket on the ASUS Z170 PRO Gaming motherboard. The metal load plate is open, revealing the pins within the socket. The surrounding area shows power delivery components and heatsinks, indicating the robust design for CPU stability.

4.3 Instalace paměti (RAM)

Insert DDR4 memory modules into the DIMM slots. Ensure the notches on the memory modules align with the keys in the DIMM slots. Press down firmly on both ends of the memory module until the clips on the slots snap into place.

4.4 Instalace paměťového zařízení

The motherboard supports M.2 SSDs and SATA 6Gb/s devices. Install M.2 SSDs into the dedicated M.2 slot and secure with the provided screw. Connect SATA drives using the SATA cables to the SATA ports on the motherboard.

4.5 Instalace rozšiřující karty

Install graphics cards or other PCIe expansion cards into the appropriate PCI Express slots. Ensure the card is fully seated and secured with the case's retention mechanism.

Popis obrázku: Úhlové view of the ASUS Z170 PRO Gaming motherboard, highlighting the multiple PCI Express slots. The red accents on the heatsinks and along the board's edge are visible, contributing to the gaming aesthetic. The I/O panel connectors are also partially visible on the left.

4.6 Připojení napájení

Connect the 24-pin ATX power connector and the 8-pin CPU power connector from your power supply unit (PSU) to the corresponding ports on the motherboard. Ensure all power connections are secure.

4.7 Přední panel a připojení I/O

Connect your case's front panel headers (power button, reset button, USB ports, audio jacks) to the corresponding pins on the motherboard. Refer to the motherboard layout diagram in the full user manual for precise pin locations.

Popis obrázku: This image provides a close-up of the rear I/O panel of the ASUS Z170 PRO Gaming motherboard. Various ports are visible, including USB ports (USB 3.0, USB 3.1 Type-A and Type-C), HDMI, DVI-D, DisplayPort, Gigabit Ethernet, and audio jacks, along with a PS/2 combo port.

5. Operační systém a ovladače

After hardware installation, install your preferred operating system. Following the OS installation, install the necessary drivers for the motherboard components. The included Supporting DVD contains most drivers. For the latest drivers and utilities, visit the official ASUS support website for the Z170 PRO Gaming model.

5.1 Nastavení BIOSu/UEFI

The motherboard features a UEFI BIOS interface. To access the BIOS, press the Vymazat key during system startup. The UEFI provides options for system configuration, boot order, and advanced settings including overclocking. Refer to the full user manual for detailed BIOS navigation and settings.

6. Údržba

Pravidelná údržba pomáhá zajistit dlouhou životnost a optimální výkon vaší základní desky.

• Čištění: Periodically clean dust from the motherboard and case interior using compressed air. Ensure the system is powered off and unplugged before cleaning.
• Aktualizace BIOSu: ASUS regularly releases BIOS updates to improve stability, add new features, and enhance compatibility. Download BIOS updates from the official ASUS support website. Note that updating the BIOS for compatibility with newer CPU generations (e.g., 7th Gen Kaby Lake) may require an older generation CPU (e.g., 6th Gen Skylake) to perform the update.
• Výměna baterie: The motherboard uses a CR2032 lithium coin cell battery for the CMOS. If system time or BIOS settings are frequently lost, the battery may need replacement.

7. Řešení problémů

Tato část se zabývá běžnými problémy, se kterými se můžete setkat.

• Bez napájení/Žádný POST:
  • Ujistěte se, že všechny napájecí kabely (24pinový ATX, 8pinový CPU) jsou bezpečně připojeny.
  • Verify that the CPU, RAM, and graphics card are correctly seated.
  • Check for diagnostic LEDs on the motherboard. These LEDs can indicate issues with CPU, DRAM, VGA, or Boot devices. Refer to the full user manual for specific LED codes and their meanings.
• Nestabilita/pády systému:
  • Ujistěte se, že všechny ovladače jsou aktuální.
  • Check memory modules for errors using diagnostic tools.
  • Sledujte teplotu CPU a GPU, abyste zabránili přehřátí.
• Problémy s aktualizací BIOSu:
  • Always use the correct BIOS file pro váš konkrétní model základní desky.
  • Do not interrupt the BIOS update process.
  • If a BIOS update fails, consult the ASUS support webmísto pro postupy obnovy.

8. Specifikace

9. Záruka a podpora

For warranty information, technical support, or service inquiries, please visit the official ASUS support website. You can find detailed warranty terms and conditions, FAQs, and contact information for customer service specific to your region.

Podpora ASUS Webmísto: www.asus.com/support/