Scheppach DM460T Lathe User Manual

1. Úvod

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Scheppach DM460T Lathe. Please read these instructions thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

The Scheppach DM460T lathe is designed for hobbyists and model makers requiring precision in woodturning. It features a solid cast iron frame and a powerful 550 Watt induction motor for vibration-free operation. Key features include a robust cast frame, 5 speed settings for various materials, a smooth-running 0.75 HP motor, and a compact, lightweight design for portability. The bed, tailstock, and tool rests are constructed from cast iron.

Figure 1: Scheppach DM460T Lathe, a robust woodturning machine.

2. Bezpečnostní pokyny

Vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem a zranění osob. Uschovejte si tento návod pro budoucí použití.

2.1 Obecná bezpečnost

• Read and understand all instructions before operating the lathe.
• Používejte vhodné osobní ochranné prostředky (OOP), včetně ochranných brýlí, ochrany sluchu a protiprachové masky.
• Ujistěte se, že pracovní prostor je čistý, dobře osvětlený a bez překážek.
• Udržujte děti a neoprávněné osoby v dostatečné vzdálenosti od stroje.
• Neobsluhujte stroj pod vlivem drog, alkoholu nebo léků.
• Secure the workpiece firmly before turning.
• Nikdy nenechávejte stroj bez dozoru.
• Před prováděním úprav, výměny příslušenství nebo údržby odpojte napájení.

2.2 Elektrická bezpečnost

• Ujistěte se, že napájecí zdroj odpovídá objtage specified on the machine's rating plate (230 V).
• Nevystavujte stroj dešti nebo mokru.
• Vyhněte se použití stroje v damp nebo vlhkých místech.
• Do not abuse the power cord. Never use the cord for carrying, pulling, or unplugging the machine.
• Udržujte napájecí kabel mimo dosah tepla, oleje, ostrých hran nebo pohyblivých částí.

3. Komponenty přesview

Familiarize yourself with the main components of the Scheppach DM460T Lathe:

• Vřeteník: Contains the motor, spindle, and speed control.
• Vřeteno: The rotating shaft that holds the workpiece.
• Koník: Supports the free end of the workpiece, adjustable along the bed.
• Lathe Bed: The main frame providing stability and guiding the tailstock and tool rest.
• Opěrka nástroje: Adjustable support for turning tools during operation.
• Motor: 550 Watt induction motor providing power for turning.
• Ovládání rychlosti: Mechanism to select one of the 5 available spindle speeds.
• Vypínač: Power control for the machine.

Figure 2: Main components of the Scheppach DM460T Lathe. The headstock is on the left, tailstock on the right, and the tool rest is in the center.

4. Nastavení

4.1 Vybalení a kontrola

1. Opatrně vyjměte všechny součásti z obalu.
2. Inspect for any shipping damage. Report any damage to your supplier immediately.
3. Ujistěte se, že jsou přítomny všechny díly uvedené v dodacím listu.

4.2 Montáž soustruhu

1. Place the lathe on a sturdy, level workbench or stand capable of supporting its weight (approx. 38 kg).
2. Secure the lathe to the workbench using appropriate fasteners through the mounting holes in the base. This prevents movement during operation.

4.3 Připojení napájení

• Connect the power cord to a grounded 230 V AC outlet.
• Ensure the power switch is in the "OFF" position before plugging in the machine.

4.4 Optional Bed Extension

The DM460T lathe can be extended to accommodate longer workpieces. If using the optional bed extension, follow the manufacturer's instructions for secure attachment.

Figure 3: Scheppach DM460T Lathe illustrating the attachment of an optional bed extension for increased workpiece capacity.

5. Návod k obsluze

5.1 Selecting Spindle Speed

The DM460T offers 5 spindle speeds to suit various materials and turning operations. Adjust the belt position on the pulleys inside the headstock to change speeds. Always disconnect power before adjusting belts.

• Available speeds: 650, 1100, 1450, 2000, 3000 RPM.
• Use lower speeds for larger diameter workpieces, roughing cuts, or harder woods.
• Use higher speeds for smaller diameter workpieces, finishing cuts, or softer woods.

5.2 Upevnění obrobku

1. Ensure the workpiece is balanced and free of defects that could cause it to break apart during turning.
2. Mount the workpiece securely between the headstock drive center and the tailstock live center.
3. Tighten the tailstock firmly to hold the workpiece in place.
4. Rotate the workpiece by hand to ensure it clears the tool rest and bed.

Figure 4: A workpiece securely mounted between the headstock and tailstock on the Scheppach DM460T Lathe, ready for turning.

5.3 Adjusting the Tool Rest

• Position the tool rest as close as possible to the workpiece without touching it.
• Adjust the height of the tool rest so that the cutting edge of your turning tool is slightly above the center line of the workpiece.
• Ensure the tool rest is securely locked in position before starting the lathe.

5.4 Spouštění a zastavování

• Before starting, ensure all adjustments are tight and the workpiece is secure.
• Turn the lathe ON using the designated power switch.
• Allow the machine to reach full speed before beginning to cut.
• To stop, turn the lathe OFF using the power switch and wait for the spindle to come to a complete stop before approaching the workpiece.

6. Údržba

Regular maintenance ensures the longevity and safe operation of your lathe. Always disconnect the machine from the power supply before performing any maintenance.

6.1 Čištění

• After each use, clean wood dust and chips from the lathe bed, headstock, tailstock, and motor housing.
• Use a brush or compressed air. Avoid using water or solvents that could damage electrical components or painted surfaces.

6.2 Mazání

• Periodically apply a light coat of machine oil to the lathe bed and tailstock quill to ensure smooth movement.
• Do not over-lubricate, as excess oil can attract dust.

6.3 Belt Inspection and Replacement

• Regularly inspect the drive belt for wear, cracks, or damage.
• If the belt shows signs of wear, replace it with an original Scheppach replacement part to maintain optimal performance.

7. Řešení problémů

This section addresses common issues you might encounter with your Scheppach DM460T Lathe.

8. Specifikace

9. Záruka a podpora

For warranty information, technical support, or to order replacement parts, please contact your authorized Scheppach dealer or visit the official Scheppach webwebu. Uschovejte si účtenku jako doklad o koupi.