Zavedení
Welcome to the user manual for your new MODSTER Helix 150 Flybarless RC Helicopter. The Helix 150 is designed for beginners, offering extremely stable flight behavior thanks to its sophisticated 6-axis stabilization sensor. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your helicopter to ensure a safe and enjoyable experience.
Bezpečnostní informace
Please read and understand all safety warnings before operating the MODSTER Helix 150. Failure to do so may result in injury or damage to the product.
- Pouze pro vnější použití. Do not operate indoors in confined spaces where damage to property or injury to persons may occur.
- Vyhněte se kontaktu s očima. Keep the helicopter and its components away from your face, especially during operation.
- Uchovávejte mimo dosah otevřeného ohně a přímých zdrojů tepla. This applies to the helicopter, battery, and charger.
- Doporučuje se dohled dospělé osoby for users under the age of 14.
- Neupravujte the helicopter or its components.
- Ujistěte se, že je baterie plně nabitá before each flight and disconnect it after use.
- Operate in open areas free from obstacles, people, and animals.
Obsah balení
Carefully unpack all items and check against the list below. If any items are missing or damaged, please contact customer support.
- MODSTER Helix 150 Helicopter
- Dálkové ovládání (vysílač)
- 300 mAh LiPo Battery
- USB nabíjecí kabel
- Spare Main Rotor Blades (Set)
- Spare Tail Rotor Blades (Set)
- Spare Swashplate Linkage Rod
- Šroubovák s křížovou hlavou
- Imbusový klíč
- User Manual (German/English)
Konec produktuview
The MODSTER Helix 150 is a compact and stable RC helicopter, perfect for learning to fly. Its design incorporates features for ease of use and durability.
Obrázek 1: The MODSTER Helix 150 Flybarless RC Helicopter. This image shows the complete helicopter with its main rotor blades, tail rotor, landing skids, and sleek body design.
Obrázek 2: The MODSTER Helix 150 helicopter alongside its remote control. This image highlights the "Flybarless Heli for Everyone" concept, emphasizing ease of use for beginners with features like auto start/landing and stabilization.
Obrázek 3: Visual representation of key features including 6-axis stabilization, RTF (Ready-To-Fly) out of the box, Gyro stabilization, and a length of 268 mm.
Obrázek 4: The helicopter demonstrating horizontal stabilization during hover flight, a key feature for beginner pilots.
Nastavení
1. Nabíjení letové baterie
- Connect the included USB charging cable to a USB power source (e.g., computer USB port, USB wall adapter).
- Connect the 300 mAh LiPo battery to the USB charging cable.
- The charging indicator light on the USB cable will show the charging status (e.g., red for charging, green for fully charged).
- Charging typically takes approximately 30-60 minutes. Do not overcharge the battery.
2. Vložení baterií do dálkového ovladače
- Otevřete přihrádku na baterie na zadní straně dálkového ovladače.
- Insert the required batteries (typically 4x AAA, not included) ensuring correct polarity (+/-).
- Bezpečně uzavřete přihrádku na baterie.
3. Propojení vrtulníku a dálkového ovládání
- Ensure the helicopter's battery is disconnected and the remote control is turned off.
- Zapněte dálkové ovládání.
- Connect the flight battery to the helicopter. Place the helicopter on a flat, stable surface.
- The helicopter's indicator light will flash, and the remote control will beep.
- Move the throttle stick (left stick for Mode 2) all the way up, then all the way down.
- The indicator lights on both the helicopter and remote control should become solid, indicating a successful binding.
Návod k obsluze
1. Předletové kontroly
- Ujistěte se, že je letová baterie plně nabitá.
- Check that the remote control batteries are sufficient.
- Zkontrolujte listy rotoru, zda nejsou poškozené nebo prasklé.
- Ensure all linkages are securely connected.
- Pro let si vyberte otevřený a čistý prostor, mimo dosah lidí, zvířat a překážek.
2. Take-off (Auto Start)
After binding, place the helicopter on a flat surface. Press the "Auto Take-off" button (often marked with an arrow pointing up or a take-off icon) on the remote control. The helicopter will automatically ascend to a stable hover height.
3. Basic Flight Controls (Mode 2)
The remote control supports both Mode 1 and Mode 2. This manual describes Mode 2, which is common for RC helicopters. Refer to your remote control's specific instructions for switching modes if needed.
- Levá páčka (plyn/stáčení):
- Nahoru/dolů: Controls altitude (throttle).
- Vlevo/vpravo: Controls yaw (rotation around its vertical axis).
- Pravá páčka (náklon/klopení):
- Nahoru/dolů: Ovládá výšku tónu (pohyb vpřed/vzad).
- Vlevo/vpravo: Ovládá klopení (pohyb do stran).
4. Landing (Auto Landing)
To land the helicopter, press the "Auto Landing" button (often marked with an arrow pointing down or a landing icon) on the remote control. The helicopter will automatically descend and land gently.
Alternatively, you can manually land by slowly lowering the throttle stick until the helicopter gently touches down. Once landed, immediately pull the throttle stick all the way down and hold for a few seconds to stop the rotors.
Údržba
- Čištění: Use a soft, dry cloth to wipe down the helicopter after each flight. Avoid using water or solvents.
- Kontrola rotorových listů: Regularly check main and tail rotor blades for any signs of damage (cracks, bends, chips). Replace damaged blades immediately using the included spare parts and screwdriver.
- Péče o baterie:
- Always disconnect the battery from the helicopter after use.
- Baterii skladujte na chladném a suchém místě, mimo dosah přímého slunečního záření a extrémních teplot.
- Do not store fully charged or fully discharged for extended periods. For long-term storage, charge to approximately 50%.
- Kontrola propojení: Periodically check all control linkages for looseness or damage. Use the provided tools for adjustments or replacements.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Vrtulník nereaguje na dálkové ovládání. | Not bound, low remote control battery, helicopter battery low. | Re-bind the helicopter and remote. Replace remote control batteries. Charge helicopter battery. |
| Vrtulník se během visení pohybuje vpředu. | Trim settings incorrect, minor damage to blades, strong wind. | Adjust trim buttons on remote. Inspect and replace damaged blades. Fly in calm conditions. |
| Rotors spin but helicopter does not lift off. | Low helicopter battery, damaged main rotor blades, motor issue. | Charge helicopter battery. Replace main rotor blades. Contact support if motor issue suspected. |
| Krátká doba letu. | Baterie není plně nabitá, stárnoucí baterie, agresivní létání. | Ensure full charge. Battery life decreases over time; consider replacement. Practice smoother flying. |
Specifikace
| Funkce | Detail |
|---|---|
| Název modelu | šroubovice 150 |
| Číslo modelu | HeliX 150 Flybarless 1S RTF |
| Průměr rotoru | 245 mm |
| Délka | 268 mm |
| Hmotnost | 52 g |
| Stabilizace letu | 6-Axis Gyro Stabilization |
| Doba letu | Až 15 minut |
| Baterie | 300 mAh LiPo |
| Typ ovládání | Radio Control (Mode 1 & Mode 2 switchable) |
| Speciální funkce | Auto Start/Landing, Horizontal Hover Stabilization |
| Doporučený věk | 14 let a více |
| Hlavní materiál | Plast |
| Barva | Bordeaux |
Záruka a podpora
For warranty information, please refer to the documentation provided at the time of purchase or visit the official MODSTER webmísto.
If you encounter any issues not covered in this manual or require further assistance, please contact MODSTER customer support. You can typically find contact details on the product packaging or the official MODSTER website. When contacting support, please have your product model number (HeliX 150 Flybarless 1S RTF) and purchase information ready.