Řetězová pila Stihl 2 v 1 File Návod k použití držáku

1. Úvod

This manual provides instructions for the Stihl 2-in-1 File Holder, an essential tool for maintaining the sharpness and performance of your chainsaw chain. This device is designed to sharpen the cutting teeth and file down the depth gauges simultaneously, ensuring optimal cutting efficiency for 3/8" pitch chains with 5.2mm diameter files.

Image: The Stihl 2-in-1 File Holder, a compact tool with a grey body and orange accents, designed for precise chainsaw chain sharpening.

2. Bezpečnostní informace

Always prioritize safety when working with chainsaws and sharpening tools. Adhere to the following guidelines:

• Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and gloves, when sharpening chainsaw chains.
• Ensure the chainsaw is turned off, the spark plug cap is removed, and the chain brake is engaged before beginning any maintenance or sharpening.
• Secure the chainsaw firmly to prevent movement during sharpening. Using a vise to hold the guide bar is highly recommended.
• Zacházet s files with care to avoid injury. Files are sharp and can cause cuts.
• Udržujte děti a kolemjdoucí mimo pracovní oblast.

3. Součásti a specifikace produktu

The Stihl 2-in-1 File Holder (Model 5605-750-4305) is an integrated tool that includes two round files for sharpening the cutting teeth and a flat file for reducing the depth gauges. This specific model is designed for 3/8" pitch chainsaw chains and uses 5.2 mm (13/64") diameter files.

Obrázek: Detailní záběr view of the Stihl 2-in-1 File Holder, showing the 3/8" / Ø 5,2 mm marking, indicating compatibility with specific chain types and file průměry.

Image: A single Stihl round file, featuring a textured surface for effective sharpening.

Technické specifikace

4. Nastavení a příprava

Before you begin sharpening, ensure your chainsaw and the file holder are properly prepared:

1. Secure the Chainsaw: Place your chainsaw on a stable, flat surface. Engage the chain brake and ensure the engine is off. For optimal stability and safety, clamp the chainsaw bar firmly in a vise.
2. Identify Chain Direction: Observe the cutting teeth on your chainsaw chain. They are typically angled in one direction. You will sharpen all teeth facing one way first, then either flip the chainsaw or move to the other side to sharpen the remaining teeth.
3. Umístěte File Držák: The Stihl 2-in-1 File Holder has visual markings, including arrows, indicating the correct direction for filing. Align the file holder with a cutting tooth, ensuring the two round files rest on the cutting edge and the flat file rests on the depth gauge. The arrows on the tool should point in the direction of chain travel (away from the engine).

Image: A user positioning the Stihl 2-in-1 File Holder onto a chainsaw chain, demonstrating the correct alignment for sharpening.

5. Operating Instructions (Sharpening Process)

The Stihl 2-in-1 File Holder is designed to sharpen both the cutting tooth and the depth gauge simultaneously, simplifying the sharpening process.

1. Initial Pass: s file holder correctly positioned on a tooth, apply light, even pressure and push the tool across the cutting tooth and depth gauge in a single, smooth stroke. Only sharpen on the forward stroke; lift the tool slightly on the return stroke to prevent dulling the file.
2. Repeat Strokes: Perform approximately three to five strokes per tooth. The exact number of strokes may vary depending on the dullness of the tooth. Ensure consistent pressure and maintain the correct angle for each stroke.
3. Zkontrolujte otřepy: After sharpening, carefully check the back of the cutting tooth for a small burr. This burr indicates that the tooth has been sharpened effectively. The burr can be removed by lightly filing the back of the tooth with a flat file, if necessary, or it may wear off during initial use.
4. Move to Next Tooth: Advance the chain to the next cutting tooth facing the same direction and repeat the sharpening process. Continue this until all teeth on one side of the chain are sharpened.
5. Sharpen Opposite Side: Once all teeth facing one direction are sharpened, either flip the chainsaw or move to the other side of the guide bar. Reposition the file holder for the opposite direction (the arrows on the tool will now point the other way) and sharpen the remaining teeth following the same procedure.
6. Konzistence: Maintain a consistent number of strokes for each tooth to ensure uniform sharpness and length across the entire chain, which is crucial for balanced cutting.

6. Údržba

To ensure the longevity and continued effectiveness of your Stihl 2-in-1 File Holder, follow these maintenance tips:

• Čistý Files: Po každém použití vyčistěte files with a wire brush to remove metal filings and debris. This prevents clogging and maintains filing efficiency.
• Kontrolovat Files: Pravidelně kontrolujte files for wear. Worn files will not sharpen effectively and should be replaced. The round files are consumable items and are designed to be replaced when dull.
• Skladování: Uložte file holder in a dry place to prevent rust and corrosion.
• Péče o rukojeť: Keep the tool's handles clean and free of oil or grease for a secure and comfortable grip during use.

7. Řešení problémů

If you encounter issues while sharpening your chainsaw chain, consider the following common problems and solutions:

• Chain Not Cutting Effectively:
  • Tupý Files: Replace worn or clogged files. Files lose their effectiveness over time.
  • Nesprávný úhel: Zajistěte file holder is aligned correctly with the markings on the tool and the chain. An incorrect angle will result in poor cutting performance.
  • Insufficient Depth Gauge Filing: If the depth gauges (rakers) are too high, the cutting teeth cannot bite into the wood effectively. While the 2-in-1 tool automatically addresses this, verify the flat file is making proper contact.
  • Nerovnoměrné ostření: Ensure a consistent number of strokes and pressure on each tooth to achieve uniform sharpness and length.
• Chain Pulling to One Side:
  • This often indicates that one side of the chain is sharper or longer than the other. Re-sharpen the chain, paying close attention to applying equal strokes to all teeth on both sides.
• Files Slipping:
  • Zajistěte files are securely seated in the holder.
  • Clean any oil, sawdust, or debris from the chain teeth and the files themselves to improve grip and filing action.

8. Záruka a podpora

For information regarding warranty coverage, service, or replacement parts for your Stihl 2-in-1 File Holder, please refer to the official Stihl website or contact an authorized Stihl dealer. It is recommended to keep your purchase receipt as proof of purchase.

For additional support or inquiries, you may visit the official Stihl webmísto: www.stihlusa.com.