Uživatelská příručka k procesoru Intel Broadwell Core i7-5775C

1. Úvod

The Intel Broadwell Core i7-5775C is a 5th Generation processor designed for desktop systems. Built on 14nm process technology, this unlocked processor offers enhanced performance and power efficiency. It features Intel Iris Pro Graphics 6200 and is compatible with LGA 1150 sockets.

Mezi klíčové vlastnosti patří:

• 3.3GHz clock speed with 3.7GHz turbo frequency
• 14nm procesní technologie
• 4 cores, 8 threads
• LGA 1150 socket compatibility
• Integrated Iris Pro 6200 Graphics
• Supports DDR3 1600 MHz memory
• 65W Thermal Design Power (TDP)
• Includes fan and heat sink

Figure 1: Intel Broadwell Core i7-5775C Processor retail packaging.

2. Nastavení a instalace

This section provides general guidelines for installing your Intel Core i7-5775C processor. Always refer to your motherboard's specific manual for detailed instructions, as procedures may vary.

2.1 Bezpečnostní opatření

• Ensure your system is powered off and unplugged from the wall outlet before beginning installation.
• Discharge any static electricity by touching a grounded metal object (e.g., your computer case) before handling components.
• Handle the processor by its edges to avoid touching the gold contacts or the top surface.
• Avoid bending the pins on the processor or the motherboard socket.

2.2 Processor Installation (LGA 1150 Socket)

1. Příprava základní desky: Locate the LGA 1150 CPU socket on your motherboard. Lift the load lever and open the metal load plate.
2. Zarovnání procesoru: Carefully remove the processor from its protective packaging. Align the two notches on the processor with the corresponding keys on the CPU socket. Ensure the gold triangle on the processor aligns with the triangle on the socket.
3. Vložte procesor: Gently lower the processor straight down into the socket. Do not force it. It should sit flush without significant pressure.
4. Zabezpečení procesoru: Close the metal load plate over the processor. Lower the load lever and push it back into place until it clicks, securing the processor firmly in the socket.
5. Naneste teplovzdornou pastu (pokud nebyla předem nanesena): If your heat sink does not have pre-applied thermal paste, apply a small pea-sized dot of thermal paste to the center of the processor's integrated heat spreader (IHS).
6. Instalace chladiče a ventilátoru: Place the included fan and heat sink assembly directly over the installed processor. Align the four fasteners on the heat sink with the holes on the motherboard. Press down firmly on each fastener until it clicks into place. Connect the fan's power cable to the CPU_FAN header on the motherboard.

3. Obsluha procesoru

Once installed, your Intel Core i7-5775C processor will operate automatically. However, certain settings can be adjusted via the motherboard's BIOS/UEFI firmware to optimize performance or manage power.

3.1 Nastavení BIOSu/UEFI

• Přístup k BIOSu/UEFI: During system startup, repeatedly press the designated key (commonly Del, F2, F10, or F12) to enter the BIOS/UEFI setup utility.
• Nastavení paměti: Ensure your DDR3 1600 MHz memory is detected and configured correctly. You may need to enable XMP (Extreme Memory Profile) for optimal performance if your memory supports it.
• Overclocking (Unlocked Processor): The i7-5775C is an unlocked processor, allowing for overclocking. Exercise caution when adjusting CPU core ratios, voltages, and other parameters. Refer to advanced guides and ensure adequate cooling to prevent system instability or damage.
• Integrovaná grafika: The Intel Iris Pro Graphics 6200 is integrated. If you are using a dedicated graphics card, ensure the primary display output is set correctly in the BIOS/UEFI.

3.2 Software a ovladače

Nainstalujte nejnovější ovladače čipové sady od výrobce základní desky website and graphics drivers for the Intel Iris Pro Graphics 6200 from Intel's official webweb pro optimální výkon a stabilitu.

4. Údržba

Správná údržba zajistí dlouhou životnost a optimální výkon vašeho procesoru.

• Odstranění prachu: Regularly clean dust from the CPU heat sink and fan using compressed air. Accumulation of dust can impede airflow and lead to overheating.
• Teplovodní pasta: Over time, thermal paste can dry out. If you notice increased CPU temperatures, consider reapplying fresh thermal paste. This involves carefully removing the heat sink, cleaning off old paste, and applying new paste.
• Aktualizace BIOSu/UEFI: Pravidelně kontrolujte výrobce základní desky webweb s aktualizacemi systému BIOS/UEFI. Tyto aktualizace mohou zlepšit kompatibilitu, stabilitu a výkon.

5. Řešení problémů

If you encounter issues with your processor, refer to the following common troubleshooting steps:

• Žádný displej/Systém se nespustí:
  • Ensure the CPU is correctly seated in the socket and the load lever is fully engaged.
  • Verify that the CPU fan is connected to the CPU_FAN header and spinning.
  • Check that all power cables (24-pin ATX, 8-pin EPS) are securely connected to the motherboard.
  • Zkuste znovu osadit moduly RAM.
  • Clear the CMOS (Complementary Metal-Oxide-Semiconductor) settings on your motherboard (refer to your motherboard manual).
• Přehřátí/Vypnutí systému:
  • Ensure the CPU heat sink is properly installed and making good contact with the processor.
  • Ověřte, zda byla teplovodivá pasta správně nanesena.
  • Clean any dust accumulation from the heat sink fins and fan.
  • Zkontrolujte proudění vzduchu ve skříni a konfiguraci ventilátorů.
• Nestabilita/pády systému:
  • If overclocking, revert to default BIOS settings.
  • Ensure memory is running at its rated speed and timings (enable XMP if applicable).
  • Update motherboard BIOS/UEFI and all relevant drivers.

6. Specifikace

7. Záruka a podpora

7.1 Právní prohlášení

This product is brand new and factory sealed. It ships only to the 48 continental US states. Shipping is not available to AK/HI/PR/APO/FPO/PO boxes.

7.2 Další podpora

For further technical assistance, driver downloads, or warranty claims, please visit the official Intel support webnebo kontaktujte svého prodejce.

Figure 2: Intel technologies supported by the processor.