1. Úvod
The Morimoto XB LED Foglights are designed as a direct replacement and upgrade for your vehicle's factory fog lights. These units feature high-performance LED chips and projector optics to provide superior illumination, enhancing visibility and safety. They are engineered for a plug-and-play installation, requiring no special wiring or modifications to your vehicle's existing system. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your new fog lights.
Image 1.1: Morimoto XB LED Foglights and packaging.
This image displays the Morimoto XB LED Foglights alongside their product packaging, highlighting the sleek design of the fog lights and the branding on the box.
Mezi klíčové vlastnosti patří:
- Powered by three Philips Luxeon-T 5000K LEDs, producing approximately 1200 raw lumens per side for a total of 2400 lumens.
- Projector-based optics concentrate light into a wide and perfectly distributed beam pattern.
- SAE, DOT, and ECE approved for legal on-road use.
- Durable polycarbonate lens and powder-coated cast aluminum housing for long-term resistance to wear, UV, moisture, and road debris.
- Plug-and-play design for easy installation into factory power outlets.
2. Bezpečnostní informace
Please read and understand all safety instructions before installing or operating the Morimoto XB LED Foglights. Failure to follow these instructions may result in injury or damage to the product or vehicle.
- Elektrická bezpečnost: Always disconnect the vehicle's battery before performing any electrical work to prevent short circuits or electrical shock.
- Profesionální instalace: If you are not comfortable with automotive electrical systems or vehicle disassembly, it is recommended to seek professional installation.
- Zacházení: Handle the fog lights carefully to avoid damaging the lens or internal components.
- Teplo: The fog light housings act as heat sinks for the LEDs and may become warm during operation. Avoid touching them immediately after use.
- Ochrana očí: Wear appropriate eye protection during installation.
- Proper Aiming: Ensure fog lights are aimed correctly after installation to avoid blinding oncoming drivers and to maximize their effectiveness.
3. Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny a nepoškozené.
- 2x Morimoto XB LED Foglight Assemblies (Left and Right)
- Necessary Connectors
- Gumové těsnění
- Pigtails for Plug-and-Play Installation
Obrázek 3.1: Přední strana view of two Morimoto XB LED Foglights.
This image shows the front perspective of two Morimoto XB LED Foglights, highlighting their clear lenses and internal projector elements.
4. Instalační příručka
The Morimoto XB LED Foglights are designed for a straightforward plug-and-play installation. The process may vary slightly depending on your vehicle's make and model. For specific vehicle disassembly instructions, consult your vehicle's service manual or an online resource.
4.1. Kroky před instalací
- Sbírejte nástroje: You will typically need basic hand tools such as screwdrivers, wrenches, and possibly trim removal tools.
- Odpojit baterii: For safety, disconnect the negative terminal of your vehicle's battery.
- Access Fog Light Area: Depending on your vehicle, this may involve removing fender liners, bumper covers, or accessing from underneath the vehicle.
4.2. Postup instalace
- Remove Existing Fog Lights: Carefully unclip or unscrew the factory fog lights from their mounting points. Disconnect the electrical connector from the back of the factory fog light. For some vehicles like the F-150, butter knives (taped to prevent scratching) can be used to unlock tabs and 'pop' them out from the front after removing the adjusting screw and spring.
- Connect New Fog Lights: Take one Morimoto XB LED Foglight assembly. Connect the provided pigtail to the fog light. Then, connect the pigtail to your vehicle's factory fog light harness. Ensure the connection is secure. Note that these lights are continuity sensitive; ensure correct positive and negative wiring. For some Ford F-150 models, with the wire lock on top, the positive wire is on the left for both driver and passenger sides. Confirm polarity before fully seating wires into the plug, as removal can be difficult.
- Secure New Fog Lights: Mount the Morimoto XB LED Foglight assembly into the factory fog light opening. Ensure all mounting points align and the light is securely fastened.
- Opakujte pro druhou stranu: Perform steps 1-3 for the other fog light.
- Upravit cíl: The aim of the fog lights can be adjusted just like stock units using the integrated adjustment mechanism. It is recommended to adjust the aim on a level surface, ensuring the beam pattern is low and wide, not pointing upwards.
- Znovu připojte baterii: Once both fog lights are installed and secured, reconnect the negative terminal of your vehicle's battery.
- Test funkčnosti: Turn on your vehicle's fog lights to ensure they are functioning correctly.
Obrázek 4.1: Zadní strana view of Morimoto XB LED Foglights.
This image displays the rear of the Morimoto XB LED Foglights, showing the integrated heat sinks and the electrical connectors for installation.
Image 4.2: Morimoto XB LED Foglights installed on a vehicle.
This image shows the Morimoto XB LED Foglights seamlessly integrated into the front bumper of a vehicle, demonstrating their appearance once installed.
5. Návod k obsluze
The Morimoto XB LED Foglights operate in conjunction with your vehicle's existing fog light switch. Once installed, they will function identically to your factory fog lights.
- Aktivace: Turn on your vehicle's fog lights using the dedicated switch or control on your dashboard or steering column.
- Vzor paprsku: These fog lights produce a super wide and low beam pattern, designed to illuminate the road directly in front of and to the sides of your vehicle, especially useful in conditions with reduced visibility such as fog, rain, or snow. They are not intended to be driving lights that project far down the road.
- Deaktivace: Turn off your vehicle's fog lights using the same switch or control.
6. Údržba
The Morimoto XB LED Foglights are designed for durability and require minimal maintenance.
- Čištění: Clean the polycarbonate lens periodically with a soft cloth and mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the lens.
- Inspekce: Periodically inspect the fog lights for any signs of damage, loose connections, or debris accumulation. Ensure the housing remains free of dirt and mud to allow for proper heat dissipation.
- Žádné díly opravitelné uživatelem: The internal LED components are not user-serviceable. Do not attempt to open the sealed housing.
7. Řešení problémů
If you encounter issues with your Morimoto XB LED Foglights, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Fog lights do not turn on. | Loose or incorrect electrical connection. Blown fuse in vehicle's fog light circuit. | Check all electrical connections, ensuring they are secure and correctly polarized. Refer to Section 4.2. Inspect and replace the vehicle's fog light fuse if necessary. |
| One fog light is not working. | Faulty connection to that specific light. Damaged light assembly. | Verify the connection to the non-functioning light. Ensure proper polarity. If connections are good, contact Morimoto support for warranty assistance. |
| Light output is dim or flickering. | Nedostatečné napájení. Uvolněné spojení. | Ensure the vehicle's electrical system is functioning correctly. Zkontrolujte těsnost všech připojení. |
| Condensation inside the lens. | Extreme temperature changes or high humidity. Compromised seal (unlikely due to IP67 rating). | Minor condensation may dissipate with normal operation. If persistent or excessive, contact support. |
If you are unable to resolve an issue using the troubleshooting steps above, please contact Morimoto customer support for further assistance.
8. Specifikace
Detailed technical specifications for the Morimoto XB LED Foglights:
| Značka | Morimoto |
| Model | Typ F2 |
| Specifické použití pro produkt | Mlhová světla |
| Světelný zdroj | 3x Philips Luxeon-T LEDs per side |
| Teplota barev | 5000K (čistě bílá) |
| Syrové lumeny | Approx. 1200 per side (2400 total) |
| Wattage | 9 wattů |
| Materiál čočky | Polykarbonát |
| Materiál bydlení | Powder-coated Cast Aluminum |
| Hodnocení voděodolnosti | Certifikováno IP67 |
| Certifikace | SAE, DOT, ECE Approved |
| Rozměry (D x Š x V) | 5.4 x 9.5 x 4 palce |
| Hmotnost položky | 2.1 libry |
| UPC | 851469006061 |
Image 8.1: Morimoto XB LED Foglight dimensions diagram.
This technical drawing illustrates the key dimensions of the Morimoto XB LED Foglight assembly, including length, width, and height in millimeters.
9. Kompatibilita
The Morimoto XB LED Foglights (Type F2) are designed to fit a wide range of modern vehicle applications. These include, but are not limited to, certain models from Subaru, Honda, Acura, Ford, and Nissan.
- Known to fit 2015-2016 Ford F-150 models.
- Known to fit 2017 Ford F-150 models.
It is highly recommended to verify compatibility with your specific vehicle's make, model, and year before purchase and installation. Consult the product listing or contact Morimoto support for a comprehensive list of compatible applications.
10. Informace o záruce
Morimoto stands behind the quality and durability of its products. The Morimoto XB LED Foglights come with a 10-letá záruka.
- Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání.
- For detailed terms, conditions, and limitations of the warranty, please refer to the official Morimoto warranty policy available on their webnebo kontaktujte jejich zákaznickou podporu.
- Uschovejte si doklad o koupi pro záruční reklamaci.
11. Podpora a kontakt
For further assistance, technical support, or warranty inquiries regarding your Morimoto XB LED Foglights, please contact Morimoto customer service through their official channels.
- Online podpora: Visit the official Morimoto webweb s nejčastějšími dotazy, články podpory a kontaktními formuláři.
- Amazon Store: Můžete také navštívit Morimoto Store on Amazon for product information and seller contact options.
