Zavedení
This manual provides instructions for the installation, operation, and maintenance of the LASCO HC-69 Lavatory/Kitchen Faucet Handle. Designed for Briggs brand faucets, this clear Lucite style handle includes hot and cold index buttons and features an F-broach fitting with a 1-15/16-inch height. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your faucet handle.
Konec produktuview
Figure 1: LASCO HC-69 Faucet Handle. This image shows the clear Lucite handle from a top-down view a strana view, highlighting its faceted design and the central hot/cold index button area.
The LASCO HC-69 faucet handle is a replacement part designed for specific Briggs brand lavatory and kitchen faucets. It is constructed from clear Lucite, providing a durable and aesthetically pleasing finish. The handle comes equipped with pre-installed hot and cold index buttons for easy identification of water temperature. Its internal F-broach design ensures a secure fit onto compatible faucet stems.
- Materiál: Clear Lucite
- Kompatibilita: Designed for Briggs brand faucets
- Broach Type: F-broach
- Výška: 1-15/16 palce
- Vlastnosti: Includes hot and cold index buttons
Nastavení a instalace
Installation of the LASCO HC-69 faucet handle is straightforward. Ensure you have the necessary tools before beginning.
Požadované nástroje:
- Screwdriver (Phillips or flathead, depending on existing handle screw)
- Adjustable wrench (optional, for removing old handle if stuck)
- Čistící hadřík
Kroky instalace:
- Vypněte přívod vody: Locate the hot and cold water supply valves under the sink and turn them off completely. Turn on the faucet to drain any remaining water from the lines.
- Odstraňte starou rukojeť:
- Carefully pry off the decorative cap or index button on the top of the old handle to expose the retaining screw.
- Using a screwdriver, loosen and remove the retaining screw.
- Gently pull the old handle straight up and off the faucet stem. If it is stuck, a slight rocking motion or a few drops of penetrating oil may help.
- Clean Faucet Stem Area: Use a cleaning cloth to wipe away any mineral deposits or grime from the faucet stem and surrounding area. This ensures a clean fit for the new handle.
- Instalace nové rukojeti:
- Align the F-broach opening of the new LASCO HC-69 handle with the faucet stem. The handle should slide down smoothly.
- Insert the retaining screw into the top of the handle and tighten it securely with a screwdriver. Do not overtighten, as this can crack the Lucite.
- Ensure the hot and cold index buttons are correctly oriented (Hot on left, Cold on right, or as per your preference).
- Obnovení zásobování vodou: Slowly turn the hot and cold water supply valves back on. Check for any leaks around the handle base.
- Testovací provoz: Turn the faucet on and off to ensure the new handle operates smoothly and controls water flow correctly.
Návod k obsluze
The LASCO HC-69 faucet handle operates like a standard faucet handle. Rotate the handle to control the water flow and temperature (if applicable to your faucet's design).
- Zapnutí/vypnutí: Rotate the handle counter-clockwise to turn on the water and clockwise to turn it off.
- Ovládání teploty: For single-handle faucets, rotating the handle typically adjusts temperature from cold to hot. For two-handle faucets, the HC-69 is designed for either hot or cold side, indicated by its index button.
Údržba
Proper maintenance will extend the life and maintain the appearance of your Lucite faucet handle.
- Čištění: Clean the handle regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can scratch or damage the Lucite finish.
- Inspekce: Periodically check the handle for any looseness. If the handle feels wobbly, gently tighten the retaining screw located under the index button.
- Vyhněte se dopadu: While durable, Lucite can crack or chip if subjected to strong impacts. Handle with care.
Odstraňování problémů
Zde jsou některé běžné problémy a jejich řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Rukojeť je uvolněná nebo se kymácí. | Retaining screw is loose. | Remove the index button, tighten the retaining screw with a screwdriver. Do not overtighten. |
| Handle does not turn smoothly. | Mineral buildup on faucet stem or internal faucet issue. | Remove handle and clean faucet stem. If issue persists, the problem may be with the faucet's internal cartridge or valve, requiring professional plumbing assistance. |
| Po vypnutí stále kape voda. | This is typically a faucet internal issue (e.g., worn washer or cartridge), not the handle itself. | Consult your faucet's manual or a qualified plumber for repair of the faucet's internal components. |
Specifikace
| Atribut | Hodnota |
|---|---|
| Značka | LASCO |
| Číslo modelu | HC-69 |
| Materiál | Lucite |
| Barva | Jasný |
| Rozměry produktu | 2.12 x 2.12 x 1.9 palce |
| Hmotnost položky | 0.353 unce |
| Specifická použití | Lavatory and Kitchen Faucet |
| Výška rukojeti | 1-15/16 palce |
| Broach Type | F-broach |
| Speciální funkce | Snadná instalace |
Informace o záruce
All LASCO merchandise is warranted to be free of manufacturing defects. For any questions regarding warranty claims or defective part replacement, please revert to the retail place of purchase for resolution. This warranty covers manufacturing defects and does not cover damage resulting from improper installation, misuse, or normal wear and tear.
Zákaznická podpora
For plumbing questions, warranty claims, or defective part replacement, please contact the retail place of purchase. For general information about LASCO products, you may visit the official LASCO website or consult your local plumbing supply professional.
