Innova 3100i Diagnostic Code Reader/Scan Tool User Manual

1. Konec produktuview

The Innova 3100i Diagnostic Code Reader/Scan Tool is an entry-level device designed for vehicle maintenance and repair. It is compatible with all 1996 and newer OBD2 cars, light trucks, SUVs, hybrids, and minivans, both domestic and imported.

Klíčové vlastnosti:

• Quickly identifies the cause of "Check Engine" light warnings on 1996 and newer OBD2 vehicles.
• Čte a maže chybové kódy kontrolek ABS u většiny vozidel GM, Ford, Chrysler, Honda a Toyota.
• Performs Battery/Alternator tests to assess vehicle battery and alternator performance.
• Displays Freeze Frame data, showing engine conditions (e.g., fuel trim, engine coolant temperature) at the time the Malfunction Indicator Lamp (MIL) byl nastaven.
• Features Red, yellow, and green LEDs to indicate emissions monitor status.

2. Nastavení

2.1 Vybalení

Verify all components are present:

• Innova 3100i OBD2 Tool
• OBD2 cable
• AA batteries (2) - included
• Stručná referenční příručka

2.2 Připojení k vozidlu

1. Locate the vehicle's Data Link Connector (DLC) port. This is typically found under the dashboard on the driver's side.
2. Ensure the vehicle's ignition is in the "OFF" position before connecting the tool.
3. Plug the OBD2 cable from the Innova 3100i tool firmly into the vehicle's DLC port. The tool will power on automatically once connected.
4. Otočte zapalování vozidla do polohy „ON“ (vypnutý motor).

3. Návod k obsluze

3.1 Čtení diagnostických chybových kódů (DTC)

Once connected and powered on, the tool will automatically link to the vehicle's system. Follow the on-screen prompts to navigate the diagnostic menu.

1. V hlavní nabídce vyberte možnost „Číst kódy“ view stored, pending, or permanent DTCs.
2. The screen will display the DTC along with a brief description of the fault.
3. Use the arrow buttons to scroll through multiple codes if present.

3.2 Clearing Diagnostic Trouble Codes (DTCs)

Clearing DTCs will turn off the "Check Engine" light. Ensure the underlying issue has been resolved before clearing codes.

1. From the main menu, select "Erase Codes".
2. Po zobrazení výzvy potvrďte svůj výběr.
3. The tool will clear the codes and reset the Malfunction Indicator Lamp (MIL).

3.3 ABS Code Reading and Erasing

The Innova 3100i can read and clear Anti-lock Braking System (ABS) codes for specific vehicle makes.

1. V hlavní nabídce vyberte možnost „ABS“.
2. The tool will connect to the ABS system and display any stored codes.
3. Follow on-screen instructions to erase ABS codes if desired.

3.4 Živý datový tok

View real-time engine sensor data to aid in diagnostics.

1. V hlavní nabídce vyberte možnost „Živá data“.
2. The tool will display various parameters such as engine RPM, vehicle speed, coolant temperature, fuel system status, and more.
3. This feature is useful for observing how sensors are performing during vehicle operation.

3.5 Battery/Alternator Test

Zhodnoťte stav baterie a nabíjecího systému vašeho vozidla.

1. From the main menu, select "Battery/Alternator Test".
2. Follow the on-screen prompts, which may include turning headlights on/off or starting the engine.
3. The tool will provide a status report on the battery and alternator performance.

3.6 Emissions Monitor Status

Check the readiness of your vehicle's emission systems using the LED indicators.

• Zelená LED: All monitors are ready for an emissions test.
• Žlutá LED: Some monitors are not ready.
• Červená LED: One or more monitors are not ready, or there are active DTCs.

4. Údržba

4.1 Obecná péče

• Keep the tool clean and free from dust and moisture.
• Store the tool in a dry, cool place when not in use.
• Avoid dropping the tool or subjecting it to harsh impacts.

4.2 Aktualizace softwaru

The Innova 3100i may receive software updates to improve functionality and vehicle compatibility. Refer to the official Innova website or the user manual for instructions on how to update the device's firmware.

5. Řešení problémů

For common issues and troubleshooting steps, refer to page 34 of the comprehensive user manual included with your device. Below are some general tips:

• Tool not powering on: Ensure the OBD2 cable is securely connected to the vehicle's DLC port. The tool draws power directly from the vehicle.
• Žádná komunikace s vozidlem: Verify the vehicle's ignition is in the "ON" position (engine off). Check for any blown fuses related to the OBD2 port in your vehicle.
• Incorrect code readings: Ensure the tool's software is up to date. Confirm the vehicle's make, model, and year are correctly identified by the tool.
• Intermittent issues: Live data stream can help identify intermittent problems by monitoring sensor values in real-time during vehicle operation.

6. Specifikace

6.1 Co je v krabici

• OBD2 Tool
• OBD2 cable
• AA baterie (2)
• Stručná referenční příručka

7. Záruka a podpora

7.1 Informace o záruce

The Innova 3100i Diagnostic Code Reader comes with a one-year seller assurance. Please retain your proof of purchase for warranty claims.

7.2 Zákaznická podpora

For any questions or assistance, Innova customer service is available Monday through Friday from 6 AM to 6 PM Pacific Standard Time. Contact information can be found on the official Innova website or in the included Quick Reference Guide.

7.3 Kompatibilita s vozidly

While Innova products offer a range of impressive features, compatibility may vary across different vehicle makes, years, and models. This is true for all OBD2 scanners. For exact features that will work on your vehicle, check Innova's Coverage Checker tool on their official website. You can also contact customer service for confirmation.