Návod k obsluze sprchového ventilu Phylrich s vyváženým tlakem

Zavedení

This instruction manual provides detailed guidance for the installation, operation, maintenance, and troubleshooting of your Phylrich Pressure Balanced Shower Rough Valve, Model DFPHY. Please read this manual thoroughly before beginning installation or use to ensure proper function and safety.

The Phylrich DFPHY is a high-quality rough valve designed to provide consistent water temperature and pressure for your shower system. Its pressure-balanced design helps prevent sudden temperature changes when other water sources in the home are used.

Bezpečnostní informace

VAROVÁNÍ:

• Před zahájením jakékoli instalace nebo údržby vždy vypněte hlavní přívod vody.
• Pokud si nejste jisti některou částí instalace, poraďte se s kvalifikovaným instalatérem.
• Během instalace používejte vhodné osobní ochranné prostředky (OOP), jako jsou ochranné brýle a rukavice.
• Ujistěte se, že všechna připojení jsou bezpečná a těsná, aby nedošlo k poškození vodou.
• This product is designed for specific plumbing applications. Do not modify the valve or use it for purposes other than its intended design.

Nastavení a instalace

Kontrolní seznam před instalací

• Verify that all necessary components are present and undamaged.
• Ensure that the rough-in dimensions in your wall cavity are compatible with the valve.
• Confirm that your water supply lines are ready for connection.

Požadované nástroje

• Nastavitelný klíč
• Řezačka trubek nebo pila na železo
• Měřicí páska
• Úroveň
• Solder and flux (for copper connections) or appropriate sealant (for threaded connections)
• Screwdriver (Phillips/Flathead)

Kroky instalace

1. Vypněte přívod vody: Locate the main water shut-off valve for your home and turn it off. Open nearby faucets to drain residual water from the lines.
2. Prepare Rough-in Opening: Ensure the wall opening is appropriately sized for the valve body. The valve should be securely mounted to a stud or blocking within the wall.
3. Připojení vodovodního potrubí: Identify the hot and cold water inlets on the valve. Connect the hot water supply to the port marked 'H' and the cold water supply to the port marked 'C'. Connect the shower outlet to the top port and the tub spout outlet (if applicable) to the bottom port. Use appropriate plumbing techniques (soldering, threading with sealant) to ensure watertight connections.
4. Zajistěte ventil: Mount the valve securely to the framing using appropriate fasteners. Ensure the valve is level and plumb.
5. Zkouška těsnosti: Once all connections are made, slowly turn on the main water supply. Inspect all connections for leaks. If leaks are detected, turn off the water, tighten connections, and retest.
6. Instalace sady obložení: After successful leak testing and wall finishing, install the decorative trim kit (handle, escutcheon, etc.) according to the trim kit's specific instructions.

Image: The Phylrich Pressure Balanced Shower Rough Valve (Model DFPHY) showing its brass construction and connection points for hot, cold, and outlet lines. This image illustrates the core component before the decorative trim is installed.

Návod k obsluze

The Phylrich Pressure Balanced Shower Rough Valve operates in conjunction with its corresponding trim kit. The rough valve itself controls the mixing of hot and cold water to maintain a consistent temperature, even with fluctuations in water pressure from other household fixtures.

• Ovládání teploty: Rotate the handle (part of the trim kit) to adjust the water temperature. Typically, rotating counter-clockwise increases hot water, and clockwise increases cold water.
• Ovládání hlasitosti: If your trim kit includes a separate volume control, rotate or pull the handle to adjust the water flow rate.
• Diverter (if applicable): If your system includes a tub spout, use the diverter on the trim kit to switch water flow between the showerhead and the tub spout.

The pressure-balancing mechanism within the valve automatically adjusts to maintain your selected temperature, providing a comfortable and safe showering experience.

Údržba

Regular maintenance ensures the longevity and optimal performance of your Phylrich Pressure Balanced Shower Rough Valve.

• Čištění: Clean the visible parts of the trim kit regularly with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads, as they can damage the finish.
• Kontrola kazety: If you notice a decrease in water flow, inconsistent temperature, or persistent dripping, the internal cartridge may need inspection or replacement. This typically requires turning off the water supply and removing the trim kit. Consult a professional plumber if you are unsure.
• Kontroly těsnosti: Periodically check for any signs of leaks around the valve body or connections, especially during routine plumbing inspections.

Odstraňování problémů

If troubleshooting steps do not resolve the issue, it is recommended to contact a qualified plumber or Phylrich customer support.

Specifikace

Záruka a podpora

For specific warranty information regarding your Phylrich Pressure Balanced Shower Rough Valve, please refer to the warranty documentation included with your purchase or visit the official Phylrich webZáruční podmínky se obvykle vztahují na výrobní vady po stanovenou dobu.

For technical support, replacement parts, or further assistance, please contact Phylrich customer service. Contact information can usually be found on the manufacturer's webmístě nebo na obalu produktu.

Doporučuje se uschovat si doklad o koupi pro případ reklamace.