Návod k obsluze bezpečnostní sady Swann NVK-460 Wi-Fi

1. Úvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Swann NVK-460 Wi-Fi Security Kit. This system is designed to provide reliable surveillance with 720p high-definition video, wireless connectivity, and remote viewing capabilities. Please read this manual thoroughly before using the product to ensure proper setup and functionality.

Obrázek 1.1: Nadview of the Swann NVK-460 Wi-Fi Security Kit, showing the Network Video Recorder (NVR) and two wireless cameras.

2. Obsah balení

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact Swann support.

• NVK-460 Network Video Recorder (NVR) with pre-installed 500GB hard drive
• 2 x 720p Wi-Fi Cameras
• Napájecí adaptéry pro NVR a kamery
• Ethernetový kabel
• HDMI kabel
• USB myš
• Montážní šrouby a hmoždinky
• Stručný průvodce (tato příručka obsahuje podrobné pokyny)

3. Nastavení a instalace

Follow these steps to set up your Swann NVK-460 Wi-Fi Security Kit.

3.1 Připojení NVR

1. Připojení k monitoru: Připojte NVR k monitoru pomocí dodaného kabelu HDMI.
2. Připojení USB myši: Plug the USB mouse into an available USB port on the NVR.
3. Internetové připojení: Connect the NVR to your router using the Ethernet cable. This is required for initial setup and remote viewIng.
4. Zapnutí: Connect the NVR power adapter and plug it into an electrical outlet. The NVR will power on automatically.

Obrázek 3.1: Zadní view of the NVR showing connectivity ports for power, Ethernet, HDMI, and USB.

3.2 Instalace kamery

1. Napájené kamery: Connect each Wi-Fi camera to its respective power adapter and plug into an electrical outlet.
2. Montáž: Choose suitable locations for your cameras, ensuring they are within Wi-Fi range of the NVR and have a clear view of the desired surveillance area. Use the provided screws and plugs to securely mount the cameras.
3. Automatické párování: The cameras are designed to automatically pair with the NVR upon power-up. Once connected, video feeds should appear on the connected monitor.

Obrázek 3.2: A single Swann Wi-Fi camera, illustrating its design and antenna for wireless connectivity.

3.3 Mobile App Setup (SwannView Odkaz)

1. Stáhnout aplikaci: Download the "SwannView Link" app from your smartphone's app store (available for iOS and Android).
2. Vytvoření účtu: Otevřete aplikaci a vytvořte si nový účet nebo se přihlaste, pokud jej již máte.
3. Přidat zařízení: Follow the in-app instructions to add your NVR. This typically involves scanning a QR code displayed on your NVR's monitor or manually entering the device ID.
4. Vzdálený Viewing: Po přidání můžete view živé přenosy a nahrané jídlotage from your cameras remotely via the app.

Obrázek 3.3: A smartphone screen showing the SwannView Link app interface with a live camera feed.

4. Návod k obsluze

4.1 Živě View

After successful setup, the NVR will display live video feeds from all connected cameras on the monitor. You can switch between single-camera view a mřížka s více kamerami view using the NVR's interface and USB mouse.

4.2 Nahrávání

• Nepřetržité nahrávání: The system is configured to record continuously to the pre-installed 500GB hard drive.
• Záznam detekce pohybu: You can configure cameras to record only when motion is detected. This can extend recording time and reduce storage usage. Access these settings via the NVR's menu.
• Záznam zvuku: Cameras include built-in microphones for audio capture, which is recorded alongside video footage.

4.3 Přehrávání

Na review zaznamenané footage, access the playback function through the NVR's main menu. You can search by date, time, and event type (e.g., motion detection). The SwannView Link app also allows remote playback.

4.4 Vzdálený přístup

The SwannView Link app enables remote viewing and playback on your smartphone or tablet. Ensure your NVR is connected to the internet and the app is configured correctly.

5. Údržba

• Čištění: Pravidelně čistěte objektivy fotoaparátu měkkým hadříkemamp hadříkem, abyste zajistili ostrý a kvalitní obraz. Nepoužívejte agresivní chemikálie.
• Aktualizace firmwaru: Periodically check the Swann website for firmware updates for your NVR and cameras. Updates can improve performance and add new features.
• Správa pevných disků: Pevný disk s kapacitou 500 GB automaticky přepíše nejstarší soubory.tage when full. Back up important recordings regularly if needed.
• Cyklus napájení: If the system experiences issues, try power cycling the NVR and cameras by disconnecting and reconnecting their power adapters.

6. Řešení problémů

This section addresses common issues you might encounter with your Swann NVK-460 Wi-Fi Security Kit.

6.1 No Video Feed from Cameras

• Zkontrolujte napájení: Ensure cameras are properly powered and their power adapters are securely plugged into outlets.
• Wi-Fi signál: Verify that cameras are within effective Wi-Fi range of the NVR. Obstructions like thick walls can degrade signal strength. Consider repositioning cameras or the NVR.
• Opětovné spárování: If cameras lose connection, you may need to re-pair them with the NVR. Refer to the NVR's on-screen menu for pairing options.

6.2 Dálkové ovládání ViewNefunguje

• Připojení k internetu: Confirm that your NVR is connected to the internet via the Ethernet cable and your router has an active internet connection.
• Konfigurace aplikace: Double-check that the NVR is correctly added to the SwannView Link app and your account is logged in.
• Nastavení routeru: Ensure your router's firewall or security settings are not blocking the NVR's access to the internet. Some users have reported issues with DHCP; setting a static IP for the NVR on your router might resolve connectivity problems. Consult your router's manual for instructions on static IP assignment.

6.3 Špatná kvalita obrazu / Problémy s nočním viděním

• Čistá čočka: Vyčistěte objektiv fotoaparátu podle pokynů v části Údržba.
• překážky: Ensure there are no physical obstructions (e.g., spiderwebs, leaves) blocking the camera's view or infrared LEDs.
• Osvětlení: For night vision, ensure there are no strong light sources directly facing the camera, as this can cause overexposure.

6.4 Adding Additional Cameras

The NVK-460 system supports up to 4 channels. If adding additional Swann Wi-Fi cameras (e.g., NVK-470 compatible models), you may need to connect all cameras (existing and new) directly to your router via Ethernet during the syncing process with the NVR. This ensures proper pairing and integration. Consult Swann support for specific instructions on compatible models and the syncing procedure.

7. Specifikace

8. Záruka a podpora

8.1 Informace o záruce

The Swann NVK-460 Wi-Fi Security Kit comes with a 12měsíční omezená záruka from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full terms and conditions, refer to the warranty documentation included with your product or visit the official Swann webmísto.

Obrázek 8.1: Visual representation of Swann's 12-month warranty and 24/7 support commitment.

8.2 Technická podpora

Swann offers Zákaznická podpora 24/7 for technical assistance. If you encounter issues that cannot be resolved using this manual, please contact Swann technical support.

• Online podpora: Visit the Swann support webweb s nejčastějšími dotazy, průvodci řešením problémů a možnostmi kontaktování.
• Telefonická podpora: Refer to your product packaging or the Swann webweb pro regionální telefonní čísla.