1. Úvod
Thank you for choosing the ZEUS TZ-500C Electronic Flash. This high-performance flash unit is designed to provide advanced lighting capabilities for your Canon camera, enhancing your photography with powerful and precise illumination. This manual provides detailed instructions for the proper setup, operation, and maintenance of your flash unit.
2. Bezpečnostní pokyny
- Do not disassemble or attempt to repair the flash unit yourself. Refer all servicing to qualified personnel.
- Keep the flash unit dry. Do not expose it to rain, moisture, or high humidity.
- Vyhněte se přímému vystavení očí světlu blesku, zejména zblízka, protože může způsobit dočasné zhoršení zraku.
- Používejte pouze doporučené baterie. Nesprávné typy baterií nebo nesprávná instalace mohou vést k úniku, přehřátí nebo výbuchu.
- Uchovávejte mimo dosah dětí.
- Do not operate the flash in the presence of flammable gases or liquids.
3. Obsah balení
Ověřte, zda balení obsahuje všechny následující položky:
- ZEUS TZ-500C Electronic Flash Unit
- Padded Cordura Case with separate compartment
- Stofen-type Diffuser
- Uživatelská příručka (tento dokument)
4. Vlastnosti produktu
The ZEUS TZ-500C flash unit offers a range of advanced features for versatile lighting control:
- E-TTL Digital Light Control: Automatic exposure control for Canon cameras.
- Horní směrné číslo: Powerful output with a guide number of 50.
- LCD panel: Clear digital display for settings and information.
- Motorizovaný zoom: Automatic and manual zoom head from 18mm to 135mm (14mm with wide-angle diffuser).
- Odolná konstrukce: Features a metal hot shoe and metal battery compartment hinge for enhanced longevity.
- AF Assist Lamp: Manual auxiliary AF lamp for improved autofocus in low-light conditions.
- Synchronizace na zadní lamelu: Supports synchronization with the rear curtain for creative light trails.
- Fast Recycle Time: Doba nabíjení přibližně 3 sekundy.
- Vysokorychlostní kontinuální snímání: Supports up to 8 frames per second.
- Acoustic Warning: Audible alerts for flash readiness and other functions.
- Integrated Diffuser and Reflector Panel: Built-in wide-angle diffuser and retractable reflector panel.
- Více režimů blesku: E-TTL automatic, Manual, and Stroboscopic modes.
- Flash Exposure Compensation: Adjustable in 0.3-stop increments.
- Exposure Confirmation Indicator: Light indicator to confirm correct flash exposure.
5. Nastavení
5.1 Instalace baterie
- Otevřete kryt přihrádky na baterie, který se nachází na boku blesku.
- Vložte čtyři baterie velikosti AA a dbejte na správnou polaritu (+/-) vyznačenou uvnitř přihrádky.
- Close the battery compartment cover securely. The metal hinge ensures durability.
5.2 Mounting the Flash on Your Camera
- Ensure both the flash and your camera are powered off.
- Slide the flash unit's metal hot shoe into your camera's hot shoe mount until it clicks into place.
- Rotate the locking ring or lever on the flash unit to secure it firmly to the camera.
5.3 Zapnutí/vypnutí
Stiskněte a podržte ON/OFF button on the flash unit to power it on or off. The LCD panel will illuminate upon power-on.
Obrázek 1: Přední strana view of the ZEUS TZ-500C Electronic Flash. This image shows the main flash head, the red AF assist lamp, and the overall design of the unit.
Obrázek 2: Nahoře view of the ZEUS TZ-500C Electronic Flash, displaying the LCD panel and control buttons. The LCD shows current settings like flash mode, zoom, and power output. Buttons for C.Fn, Mode, Pilot, Zoom, and On/Off are visible.
6. Návod k obsluze
6.1 režimů blesku
Stiskněte tlačítko MODE tlačítko pro přepínání mezi dostupnými režimy blesku:
- E-TTL (Automatic): The flash automatically determines the optimal light output based on camera metering.
- Manuál (M): Allows you to manually set the flash power output (e.g., 1/1, 1/2, 1/4, up to 1/128).
- Stroboscopic (Multi): Fires a series of rapid flashes during a single exposure to capture multiple images of a moving subject.
6.2 Kompenzace expozice blesku (FEC)
In E-TTL mode, you can adjust the flash exposure compensation to fine-tune the flash output. Use the directional buttons (usually up/down) to adjust the FEC in 0.3-stop increments.
6.3 Nastavení zoomu
The flash head features a motorized zoom. In E-TTL mode, it typically adjusts automatically to match the lens focal length. You can also manually adjust the zoom by pressing the ZOOM button and using the directional controls.
6.4 AF Assist Lamp
The auxiliary AF assist lamp automatically illuminates when the camera's autofocus system is engaged in low-light conditions, aiding in precise focusing. This feature can usually be toggled on/off via custom functions (C.Fn).
6.5 Rear Curtain Sync
This feature allows the flash to fire just before the second curtain closes, creating a natural-looking blur behind a moving subject. Activate this setting through your camera's flash function menu.
6.6 Using Built-in Diffuser and Reflector
- Širokoúhlý difuzor: Pull out the small panel from the flash head to spread the light for wider coverage (effective for 14mm focal length).
- Reflektorový panel: Pull out the white reflector card from the flash head to create a catchlight in the subject's eyes when bouncing the flash.
6.7 Using the Stofen-type Diffuser
The included Stofen-type diffuser can be attached to the flash head to soften the light and reduce harsh shadows, providing a more even illumination. Simply slide it over the flash head until it is securely in place.
7. Údržba
- Čištění: K čištění blesku použijte měkký, suchý hadřík. V případě odolných nečistot jej lehce otřete.amphadřík vodou. Nepoužívejte organická rozpouštědla ani silné čisticí prostředky.
- Skladování: When not in use for extended periods, remove the batteries to prevent leakage. Store the flash in its padded case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Péče o baterie: Vyměňujte všechny baterie najednou. Nekombinujte staré a nové baterie ani různé typy baterií.
8. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Blesk se nespouští. | Low or dead batteries; Flash not securely mounted; Flash powered off; Camera settings incorrect. | Replace batteries; Re-mount flash securely; Power on flash; Check camera flash settings. |
| Výkon blesku je příliš slabý/silný. | Incorrect FEC setting; Manual power setting too low/high; Subject too far/close. | Adjust FEC; Adjust manual power setting; Move closer/further from subject. |
| AF asistent lamp nesvítí. | Low light conditions not met; Feature disabled in custom functions. | Ensure camera is attempting to focus in low light; Check flash custom function settings. |
| Dlouhá doba recyklace. | Low battery power; High power output setting. | Replace batteries; Use lower power settings if possible. |
9. Specifikace
| Funkce | Specifikace |
|---|---|
| Značka | ZEUS |
| Model | TZ-500C |
| Směrné číslo | 50 |
| Rozsah zoomu | 18-135mm (14mm with wide-angle diffuser) |
| Režimy blesku | E-TTL, Manual, Stroboscopic |
| Recyklovat čas | Cca. 3 sekund |
| Zdroj napájení | 4x AA baterie |
| Kompenzace expozice s bleskem | +/- 0.3 stop increments |
| AF Assist Lamp | Integrovaný |
| Hot Shoe | Kov |
| Výrobce | ZEUS |
| ASIN | B00URMP8SK |
10. Záruka a podpora
10.1 Informace o záruce
Please refer to the warranty card included with your product for specific warranty terms and conditions. Typically, ZEUS products come with a limited manufacturer's warranty covering defects in materials and workmanship for a specified period from the date of purchase. Keep your proof of purchase for warranty claims.
10.2 Zákaznická podpora
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact ZEUS customer support. Contact information can usually be found on the manufacturer's official webmístě nebo na obalu produktu.