AMS F5962

Uživatelská příručka k nástěnným hodinám s rádiovým ovládáním AMS F5962

Model: F5962

1. Úvod

Thank you for choosing the AMS F5962 Radio-Controlled Wall Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new clock. Please read these instructions carefully before use and retain them for future reference.

2. Konec produktuview

The AMS F5962 is a radio-controlled wall clock featuring an antique-style beige dial with dark brown Arabic numerals. Its painted metal housing ensures durability, and the radio-controlled movement provides accurate timekeeping by automatically synchronizing with a time signal.

AMS F5962 Radio-Controlled Wall Clock front view

Obrázek 1: Přední strana view of the AMS F5962 Radio-Controlled Wall Clock, showcasing its antique-style beige dial and dark brown Arabic numerals.

3. Obsah balení

Po vybalení zkontrolujte obsah balení. Ujistěte se, že jsou všechny položky přítomny a nepoškozené.

4. Nastavení

4.1 Instalace baterie

  1. Najděte přihrádku na baterie na zadní straně hodin.
  2. Insert one AA (or specified type) battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
  3. Bezpečně zavřete kryt bateriového prostoru.

Důležité: Use only the recommended battery type. Remove depleted batteries promptly to prevent leakage.

4.2 Počáteční synchronizace času

After battery installation, the clock will automatically attempt to receive the radio time signal.

  1. Place the clock near a window or in an open area, away from electronic devices that may cause interference.
  2. The hands will typically move to the 12 o'clock position and then begin searching for the signal.
  3. This process can take several minutes to several hours, depending on signal strength and location. Once the signal is received, the clock will automatically set itself to the correct time.

Poznámka: If the clock does not set itself after a few hours, try repositioning it or manually initiating a signal search if your model has that feature (refer to troubleshooting).

4.3 Montáž hodin

The AMS F5962 is designed for indoor wall mounting.

  1. Choose a suitable location on an indoor wall, ensuring it is sturdy enough to support the clock's weight (approximately 1.22 kg).
  2. Install a nail or wall anchor with a screw, ensuring it protrudes sufficiently (at least 2 cm) to securely hold the clock.
  3. Hang the clock using the hanging mechanism on the back.
AMS F5962 Wall Clock with dimensions

Figure 2: The AMS F5962 Wall Clock showing its approximate dimensions of 32cm diameter. The overall product dimensions are 35.4 x 35.2 x 7.4 cm.

5. Návod k obsluze

Once set up, the AMS F5962 operates automatically.

6. Údržba

6.1 Čištění

Chcete-li hodiny vyčistit, jemně otřete povrch měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky, rozpouštědla ani chemické spreje, protože by mohly poškodit povrchovou úpravu nebo vnitřní součásti.

6.2 Výměna baterie

Když se ručičky hodin přestanou pohybovat nebo se čas stane nepřesným, je pravděpodobně čas vyměnit baterii.

  1. Vyjměte starou baterii z přihrádky.
  2. Insert a new, fresh battery of the correct type (e.g., AA), observing polarity.
  3. The clock will then attempt to re-synchronize with the radio signal as described in Section 4.2.

Poznámka k životnímu prostředí: Please dispose of used batteries responsibly according to local regulations.

7. Řešení problémů

ProblémMožná příčinaŘešení
Clock hands do not move or stop.Vybitá baterie.Vyměňte baterii za novou.
Clock does not set to the correct time.
  • Slabý nebo žádný rádiový signál.
  • Rušení od jiné elektroniky.
  • Incorrect time zone setting (if applicable, though this model is typically automatic).
  • Move the clock to a different location, preferably near a window and away from electronic devices.
  • Allow several hours for the clock to receive the signal.
  • Ensure the battery is fresh.
Time is incorrect after DST change.Clock did not receive the DST signal.
  • The clock should automatically adjust. If not, try removing the battery for a few minutes and reinserting it to force a re-synchronization.
  • Ensure the clock is in a location with good signal reception.

8. Specifikace

ZnačkaAMS
Číslo modeluF5962
Typ zobrazeníAnalog
Speciální funkceRadio-Controlled Time Synchronization
MateriálMalovaný kov
BarvaBeige (dial), Brown (housing)
StylStarožitný
Rozměry produktu35.4 x 35.2 x 7.4 cm (Overall); Case diameter 32cm
Hmotnost položky1.22 kg
Zdroj napájeníNapájení z baterie
Vnitřní/venkovní použitíKrytý

9. Záruka a podpora

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. You may also visit the official AMS webstránky pro další pomoc.

Související dokumenty - F5962

Předview AMS 5898 / 5893 Radio-Controlled Clock User Manual
Detailed instructions for setting up and operating the AMS 5898 and AMS 5893 radio-controlled clocks, including time setting, alarm functions, temperature display, and maintenance.
Předview Návod k obsluze nástěnných hodin AMS
Návod k obsluze nástěnných hodin AMS, zahrnující instalaci baterií, výměnu a obecné použití v několika jazycích.
Předview Manuál k zkušební sadě adaptérové ​​desky ams AS5600L
Tato příručka poskytuje komplexní informace o adaptérové ​​desce ams AS5600L-WL_EK_AB, včetně obsahu sady, popisu desky, montážních pokynů, podrobností o zapojení pinů, provozu v režimu I2C, schémat zapojení hardwaru, rozvržení desky plošných spojů a informací o objednání.
Předview Uživatelská příručka k 14bitovému rotačnímu snímači polohy ams AS5048
Tato uživatelská příručka poskytuje podrobné informace o snímači polohy ams AS5048, 14bitovém rotačním snímači polohy s digitálním úhlem a PWM výstupem. Zahrnuje adaptérovou desku AS5048, montáž, zapojení pinů, operační obvody (SPI, Daisy Chain) a kódování firmwaru, např.ampsoubory a hardwarová schémata. Nezbytné pro inženýry, kteří tento senzor integrují do svých systémů.
Předview Manuál k vyhodnocovací sadě adaptérové ​​desky ams AS5048
Tato příručka podrobně popisuje adaptérovou desku ams AS5048 (AS5048-EK-AB), vyhodnocovací sadu pro magnetický snímač polohy AS5048. Zahrnuje hardware, provozní režimy (SPI, I2C), software, např.amples, and contact information for ams AG.
Předview Návod k obsluze hodin AMS a průvodce výměnou baterií
Pokyny k obsluze a výměně baterie v hodinách AMS s vícejazyčným vedením.