1. Konec produktuview
The Peavey PRO 18 Low Frequency Audio Speaker is designed for robust audio reproduction. It features a Kevlar-impregnated cellulose cone, ensuring durability and sound quality. The speaker has a frequency range of 40 Hz to 1.5 kHz, making it suitable for low-frequency applications. It incorporates a 3.0-inch diameter voice coil constructed from thermally bonded copper wire, a Kapton former, and a Nomex stiffener for reliable performance.

Figure 1: Peavey PRO 18 Low Frequency Audio Speaker. This image displays the front view of the speaker, highlighting its cone and frame design.
2. Bezpečnostní informace
Please read and understand all safety instructions before operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Zdroj napájení: Ensure the speaker is connected to an appropriate power source as specified in the technical specifications.
- Větrání: Nezakrývejte žádné větrací otvory. Nainstalujte v souladu s pokyny výrobce.
- Voda a vlhkost: Nevystavujte tento přístroj dešti ani vlhkosti. Nepoužívejte tento přístroj v blízkosti vody.
- Teplo: Neinstalujte v blízkosti zdrojů tepla, jako jsou radiátory, tepelné regulátory, kamna nebo jiná zařízení (včetně amplifikátory), které produkují teplo.
- Ochrana sluchu: Dlouhodobé vystavení vysokým úrovním hlasitosti může způsobit trvalé poškození sluchu. Při nastavování úrovní hlasitosti buďte opatrní.
- Montáž: If wall mounting, ensure the mounting surface can support the weight of the speaker and use appropriate hardware.
3. Nastavení
This section guides you through the initial setup of your Peavey PRO 18 speaker.
3.1 Vybalení
Carefully remove the speaker from its packaging. Inspect the speaker for any signs of damage that may have occurred during transit. If any damage is found, contact your dealer immediately. Note that the product includes the speaker unit only; no additional components are included in the box.
3.2 Umístění
Optimal placement is crucial for sound performance. Consider the following:
- Akustika místnosti: Position the speaker to minimize reflections and standing waves.
- Typ montáže: This speaker is designed for wall mount applications. Ensure secure installation.
- Rozměry: The product dimensions are 20"D x 19"W x 9"H. Allow adequate space around the speaker for proper ventilation and sound dispersion.
3.3 Připojení
The Peavey PRO 18 is a passive low-frequency speaker and requires an external amplifikátor. Zajistěte amplifier's output impedance matches the speaker's impedance (1 Ohm).
- Turn off all audio equipment before making any connections.
- Připojte reproduktor k amplifier's speaker output terminals using appropriate gauge speaker wire. Ensure correct polarity (positive to positive, negative to negative).
- The subwoofer connectivity technology is wired, utilizing an auxiliary connection.
4. Návod k obsluze
Follow these steps for proper operation of your Peavey PRO 18 speaker.
- Zapnutí: After all connections are secure, power on your ampzvlhčovač a zdroj zvuku.
- Ovládání hlasitosti: Začněte s amplifier's volume at its lowest setting. Gradually increase the volume to a comfortable listening level.
- Zvukový výstup: The speaker provides stereo audio output when connected to a compatible ampživější.
- Způsob ovládání: While the speaker itself is passive, it is compatible with systems that utilize voice control for overall audio management.
- Doporučené použití: This speaker is recommended for home theater and home entertainment systems, as well as personal electronic device usage when paired with an appropriate ampživější.
5. Údržba
Správná údržba zajistí dlouhou životnost a výkon vašeho reproduktoru.
- Čištění: K čištění vnější strany reproduktoru používejte měkký, suchý hadřík. Nepoužívejte tekuté čisticí prostředky ani aerosoly.
- Prach: Regularly dust the speaker grille and cone to prevent accumulation that could affect sound quality.
- Prostředí: Keep the speaker in a dry environment, away from direct sunlight and extreme temperatures. The speaker is not waterproof.
6. Řešení problémů
If you encounter issues with your Peavey PRO 18 speaker, refer to the following common problems and solutions.
6.1 Žádný zvuk
- Zajistěte amplifier je zapnutý a funguje správně.
- Zkontrolujte všechna připojení kabelů reproduktorů jak na reproduktoru, tak na amplifier. Verify correct polarity.
- Zkontrolujte, zda se přehrává zdroj zvuku a zda je jeho hlasitost nastavena na vyšší úroveň.
6.2 Distorted Sound or Rattling
- Snižte hlasitost na vašem amplifier. Overdriving the speaker can cause distortion.
- Zkontrolujte, zda nejsou uvolněné spoje nebo poškozený kabel reproduktoru.
- Inspect the speaker cone for any physical damage or debris.
- Ujistěte se, že je reproduktor bezpečně upevněn a nevibruje o jiné povrchy.
6.3 Intermittent Sound
- Zkontrolujte uvolněné nebo zkorodované spoje.
- Zajistěte amplifier is not overheating, which can cause it to cut out.
If these steps do not resolve the issue, contact Peavey customer support or a qualified service technician.
7. Specifikace
| Funkce | Specifikace |
|---|---|
| Číslo modelu | 497090 |
| Značka | Peavey |
| Typ reproduktoru | Subwoofer |
| Průměr basového reproduktoru | 18 palce |
| Frekvenční rozsah | 40 Hz až 1.5 kHz |
| Impedance (Znom) | 8 Ohms (Revc: 6.30 Ohms) |
| BL (T/M) | 25.10 |
| Sd (Square Meters) | 0.126 |
| Průměr kmitací cívky | 3.0 palců |
| Maximální výstupní výkon reproduktoru | 800 wattů |
| Technologie připojení | Auxiliary, Wired |
| Režim zvukového výstupu | Stereo |
| Rozměry produktu | 20"H x 19"Š x 9"V |
| Hmotnost položky | 19.01 libry |
| Typ montáže | Držák na zeď |
| Barva | Černý |
| UPC | 014367136302 |
8. Záruka a podpora
This Peavey PRO 18 Low Frequency Audio Speaker comes with a Full Warranty. For specific terms and conditions of your warranty, please refer to the documentation provided at the time of purchase or visit the official Peavey webmísto.
Pro technickou podporu, servisní dotazy nebo view additional product information, please visit the Obchod značky Peavey or contact Peavey customer service directly.