Zavedení
This manual provides comprehensive instructions for the installation, use, and maintenance of the Emtek 91033 3.5" x 3.5" Plain Bearing 5/8" Radius Corners Mortise Hinge. Please read these instructions carefully before proceeding with installation to ensure proper function and longevity of your product. Retain this manual for future reference.
Konec produktuview
The Emtek 91033 hinge is designed for residential and light commercial door applications. It features a plain bearing mechanism for smooth operation and 5/8" radius corners for compatibility with standard door preparations. This product is sold as a pair.
Obrázek 1: Emtek 91033 3.5" x 3.5" Plain Bearing Mortise Hinge. This image displays the Emtek 91033 mortise hinge. It features two leaves connected by a central pin, with rounded corners and screw holes on each leaf. The finish appears to be a dark, brushed metal, identified as Tumbled White Bronze.
Klíčové vlastnosti:
- Rozměry: 3.5 palců (délka) x 3.5 palců (šířka)
- Typ ložiska: Plain Bearing for reliable function
- Typ rohu: 5/8 inch Radius Corners
- Materiál: Durable Stainless Steel construction
- Dokončit: Unfinished (Color: Tumbled White Bronze)
- Montáž: Držák na dveře
- Množství: Sold as a pair (2 pieces)
Pokyny k instalaci
Proper installation is crucial for the optimal performance and longevity of your hinges. If you are unsure about any step, it is recommended to consult a professional.
Požadované nástroje:
- Tužka
- Měřicí páska
- Dláto
- Kladivo
- Vrtejte vhodnými vrtáky
- Šroubovák (ruční nebo elektrický)
- Ochranné brýle
Kroky instalace:
- Prepare Door and Frame: Ensure that the door and door frame are properly prepared with mortises (recesses) that match the dimensions of the hinge leaves (3.5" x 3.5" with 5/8" radius corners). The depth of the mortise should allow the hinge leaf to sit flush with the surface.
- Označit otvory pro šrouby: Place one hinge leaf into the prepared mortise on the door edge. Use a pencil to mark the locations for the screw holes. Repeat this for all hinges on the door.
- Vrtací pilotní otvory: Using an appropriate drill bit (slightly smaller than the screw diameter), drill pilot holes at the marked locations. This prevents wood splitting.
- Připevnění pantů ke dveřím: Secure the hinge leaves to the door using the provided screws. Ensure the hinges are flush and firmly attached.
- Position Door: Carefully position the door within the door frame, aligning the hinges on the door with the mortises on the frame. Use shims if necessary to maintain proper spacing.
- Mark Frame Screw Holes: Once aligned, mark the screw holes on the door frame through the hinge leaves.
- Drill Pilot Holes (Frame): Drill pilot holes into the door frame at the marked locations.
- Attach Hinges to Frame: Secure the hinges to the door frame using the remaining screws.
- Testovací provoz: Open and close the door several times to check for smooth operation and proper alignment. Adjust screws if necessary to achieve optimal performance.
Důležité: Během instalace vždy používejte vhodné ochranné pomůcky, například ochranné brýle.
Funkčnost
The Emtek 91033 plain bearing hinge is designed for smooth and consistent door movement. Once properly installed, the hinge allows the door to pivot freely between its open and closed positions. No specific operational steps are required beyond normal door usage.
- Hladký pohyb: The plain bearing design ensures a consistent pivot action.
- Trvanlivost: Constructed from stainless steel for long-lasting performance.
Údržba
Regular maintenance can extend the life and ensure the smooth operation of your Emtek hinges.
- Čištění: Clean the hinges periodically with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani agresivní chemikálie, protože by mohly poškodit povrchovou úpravu.
- Mazání: For optimal performance, apply a small amount of silicone-based lubricant to the hinge pin and knuckles annually, or if squeaking occurs. Wipe off any excess lubricant.
- Utahovací šrouby: Periodically check all mounting screws for tightness. Loose screws can lead to door sagging or improper operation. Tighten gently to avoid stripping the screw heads or wood.
- Inspekce: Inspect hinges for any signs of wear, damage, or corrosion. Replace hinges if significant damage is observed.
Odstraňování problémů
Most issues with door hinges can be resolved with simple adjustments.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Vrzání dveří | Nedostatek mazání | Apply silicone-based lubricant to hinge pins. |
| Door sags or rubs | Uvolněné montážní šrouby | Utáhněte všechny šrouby upevnění pantu. |
| Dveře se nezavírají správně | Nesouosost během instalace | Check hinge alignment and adjust screws. Ensure mortises are correctly cut. |
Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | 91033 |
| Značka | EMTEK |
| Rozměry (D x Š) | 3.5" x 3.5" |
| Typ rohu | 5/8" Radius |
| Typ ložiska | Plain Bearing |
| Materiál | Nerez |
| Dokončit | Unfinished (Tumbled White Bronze color) |
| Typ montáže | Držák na dveře |
| Množství | Pair (2 pieces) |
| Číslo dílu | 91033TWB |
Záruka a podpora
Informace o záruce:
Emtek products are manufactured to high-quality standards. For specific warranty details regarding the Emtek 91033 hinge, please refer to the official Emtek website or contact Emtek customer service directly. Warranty terms typically cover manufacturing defects.
Zákaznická podpora:
If you encounter any issues or have questions not covered in this manual, please contact Emtek customer support. You can usually find contact information on the official Emtek webweb (www.emtek.com) or through your authorized Emtek dealer.