Zavedení
This manual provides essential information for the proper installation, operation, and maintenance of your GeneralAire 990-13 Humidifier Water Pad. This product is a replacement component designed to ensure optimal performance of compatible GeneralAire whole-house humidifiers. Please read these instructions carefully before proceeding with installation or maintenance.
Compatible Humidifier Models
The GeneralAire 990-13 Water Pad is compatible with the following GeneralAire power humidifier (drain type) models:
- SL-16 series
- série 709
- série 990
- série 1040
- série 1042
- série 1137
Specifikace produktu
| Funkce | Popis |
|---|---|
| Číslo modelu | 990-13 |
| Rozměry (přibližné) | 9-3/4 inches (W) x 12-1/4 inches (H) x 1-1/2 inches (D) |
| Materiál | Aluminum evaporator material enclosed in heavy wire frame and channeling |
| Povlak | Super absorbent coating for maximum water distribution; non-soluble wetting agent for increased efficiency |
| Hmotnost | Přibližně 1.5 libry |
Poznámka: This is a custom-sized filter. Filters are built to tolerances of +/- 1/8 inch.
Pokyny k instalaci
Before beginning, ensure your humidifier's power supply is disconnected to prevent accidental operation.
- Access the Humidifier: Refer to your specific GeneralAire humidifier model's manual for instructions on how to safely open the unit and access the existing water pad. This typically involves removing a cover or panel.
- Remove Old Water Pad: Carefully slide out the old water pad from its housing. Dispose of the old pad responsibly.
- Prepare New Water Pad: The new water pad may have excess coating that can shake off before first use. This is normal and does not affect performance.
- Insert New Water Pad: Slide the new GeneralAire 990-13 Water Pad into the humidifier's housing, ensuring it is seated correctly and securely.
- Secure Humidifier: Close and secure any covers or panels that were removed.
- Obnovit napájení: Reconnect the humidifier's power supply.
This image shows two GeneralAire 990-13 Humidifier Water Pads, removed from their packaging. Each pad consists of an aluminum evaporator material enclosed within a heavy wire frame. The textured surface of the pad, designed for maximum water absorption and distribution, is clearly visible.
Operace
The GeneralAire 990-13 Water Pad functions as the primary evaporative surface within your humidifier. Once installed, the humidifier's system will automatically draw water onto the pad, and air will pass through it, facilitating the evaporation process and adding humidity to your indoor environment. No direct user interaction with the pad is required during operation.
Údržba a výměna
Regular replacement of the water pad is crucial for maintaining your humidifier's efficiency and ensuring optimal humidity output.
- For optimum performance, it is recommended to replace the filter twice per heating season.
- At a minimum, change the water pad annually.
Failure to replace the water pad as recommended can lead to reduced humidification efficiency, increased energy consumption, and potential mineral buildup within the humidifier unit.
This image displays two GeneralAire 990-13 Humidifier Water Pads, still sealed in their individual retail packaging. The packaging highlights key features such as compatibility with various GeneralAire humidifier models (709, 990, 1040, 1042, 1137 & SL16 series), dimensions, and replacement recommendations. A QR code and the GeneralAire brand logo are also visible.
Odstraňování problémů
If you experience reduced humidity output from your GeneralAire humidifier after installing a new water pad, consider the following:
- Nesprávná instalace: Ensure the water pad is correctly seated within its housing and that all humidifier components are properly reassembled.
- Vodovod: Verify that the humidifier is receiving an adequate water supply and that the water distribution system is functioning correctly.
- Humidistat Settings: Check your humidistat settings to ensure it is set to an appropriate humidity level for your home.
- Proud vzduchu: Confirm that there is proper airflow through the humidifier. Blockages can impede evaporation.
- Stav podložky: If the pad is old or heavily scaled, replace it according to the maintenance schedule.
For persistent issues, consult your GeneralAire humidifier's main instruction manual or contact GeneralAire customer support.
Záruka a podpora
For specific warranty information regarding your GeneralAire 990-13 Water Pad or for further technical assistance, please visit the official GeneralAire webwebu nebo se přímo obraťte na jejich zákaznickou podporu.
Oficiální Webmísto: www.generalfilters.com
