RYOBI Table Saw Switch Assembly Instruction Manual

1. Úvod

This manual provides essential information for the installation, operation, and maintenance of the RYOBI Table Saw Switch Assembly, part number 089110109712. Please read these instructions carefully before proceeding with any installation or repair to ensure safe and correct usage.

2. Konec produktuview

The RYOBI Switch Assembly 089110109712 is a genuine replacement part designed for various RYOBI table and band saw models. This component serves as the primary on/off control for your power tool, featuring a robust design with four electrical prongs for secure connection.

Kompatibilní modely:

• RYOBI BS1001SV 10" Band Saw
• RYOBI BS902 9" Band Saw
• RYOBI BS903 9" Band Saw
• RYOBI BTS15 10" Table Saw
• RYOBI BTS20 10" Portable Table Saw
• RYOBI BTS20R 10" Table Saw
• RYOBI BTS20R-1 10" Table Saw
• RYOBI BTS21 10" Table Saw
• RYOBI OSS500 Oscillating Spindle Sander
• RYOBI BTS16 10" Table Saw
• RYOBI RTS30 10" Portable Table Saw
• RYOBI RTS20 Portable Table Saw with Quick Stand
• RYOBI RTS10 10" Table Saw
• RYOBI BTS211 10" Table Saw
• Stolní pila RYOBI RTS21 10 palců

Obrázek 2.1: Přední view of the RYOBI Table Saw Switch Assembly. This image displays the red and yellow push-button controls for the switch, housed within a black plastic casing. The yellow button typically serves as the 'ON' control, and the red button as the 'OFF' control.

Obrázek 2.2: Zadní view of the RYOBI Table Saw Switch Assembly. This image shows the back of the switch assembly, revealing the four electrical prongs where the power tool's wiring connects. The mounting holes are also visible, indicating how the switch is secured.

3. Bezpečnostní informace

WARNING: Always disconnect the power tool from its power source before performing any assembly, adjustments, or repairs. Failure to do so can result in serious personal injury or electrical shock.

• Ensure the power tool is unplugged before beginning any work on the switch assembly.
• Používejte vhodné osobní ochranné prostředky (OOP), jako jsou ochranné brýle a rukavice.
• If you are unfamiliar with electrical wiring or power tool repair, seek assistance from a qualified technician.
• Verify all connections are secure and correctly wired before restoring power to the tool.
• Udržujte děti a kolemjdoucí mimo pracovní oblast.

4. Instalace

This section outlines the general procedure for replacing the switch assembly. Specific steps may vary depending on your table saw model. Always refer to your power tool's original instruction manual for detailed disassembly and reassembly procedures.

1. Odpojit napájení: Unplug the table saw from the electrical outlet.
2. Přístup k přepínači: Locate and access the existing switch assembly on your table saw. This may involve removing covers or panels.
3. Zapojení dokumentů: Before disconnecting any wires, carefully note or photograph the existing wiring configuration. The switch has four prongs; ensure you understand which wire connects to each prong.
4. Demontáž starého spínače: Disconnect the wires from the old switch and unmount it from its housing.
5. Instalace nového přepínače: Position the new RYOBI Switch Assembly (089110109712) into the housing.
6. Připojení kabeláže: Connect the wires to the four prongs of the new switch, ensuring they match the documented configuration from step 3. Double-check all connections for security.
7. Bezpečný přepínač: Mount the new switch assembly securely in place using the original fasteners.
8. Znovu sestavit: Znovu nasaďte všechny odstraněné kryty nebo panely.
9. Test funkčnosti: Plug the table saw back into the power outlet. Carefully test the ON and OFF functions of the new switch to ensure proper operation before using the tool for any work.

5. Provoz

The switch assembly provides simple ON/OFF control for your power tool.

• Zapnout: Stiskněte žluté tlačítko.
• Vypnout: Stiskněte červené tlačítko.

Ensure the switch operates smoothly and consistently. If you experience any issues, refer to the Troubleshooting section.

6. Údržba

The RYOBI Switch Assembly 089110109712 is designed for durability and typically requires minimal maintenance.

• Pravidelná kontrola: Periodically inspect the switch for any signs of physical damage, loose connections, or excessive wear.
• Čištění: Keep the switch area clean and free from sawdust, debris, or moisture, which can interfere with its operation. Use a dry cloth or compressed air for cleaning.
• Vyhněte se tekutinám: Do not use liquid cleaners directly on the switch or electrical components.

7. Řešení problémů

If your table saw is not functioning correctly after switch installation, consider the following:

8. Specifikace

• Číslo dílu: 089110109712
• Číslo modelu výrobce: TTI-089110109712-V2
• UPC: 687927072152
• Number of Prongs: 4
• Přibližné rozměry balení (D x Š x V): 3.98 x 3.43 x 1.89 palce
• Hmotnost položky: 2.08 unce
• Materiál: Plast
• Výrobce: Ryobi

9. Záruka a podpora

This RYOBI Switch Assembly is covered by a omezená záruka. For specific details regarding warranty coverage, duration, and terms, please refer to the documentation provided with your original RYOBI power tool or contact RYOBI customer support directly.

For technical assistance, troubleshooting beyond this manual, or to inquire about warranty claims, please visit the official RYOBI webnebo kontaktujte jejich oddělení zákaznických služeb.