Zavedení
The Hach Pocket Pro Low Range TDS Tester is designed to provide accurate and reliable measurements of Total Dissolved Solids (TDS) in various water samples. This compact and easy-to-use device features built-in diagnostics, replaceable batteries, and a large, easy-to-read LCD screen, making it ideal for field and laboratory use. This manual provides essential information for the proper setup, operation, and maintenance of your TDS tester.
Co je v krabici
- Hach Pocket Pro Low Range TDS Tester
- 4 AAA baterie
- Šňůrka
- Kalibrační roztok
- Průvodce rychlým startem
Klíčové vlastnosti
- Confidence in results
- Ušetřete čas a peníze
- Snadné použití
Nastavení
Instalace baterie
- Najděte kryt přihrádky na baterie na zadní straně testeru.
- Odstraňte kryt.
- Insert 4 AAA batteries, ensuring correct polarity as indicated inside the compartment.
- Bezpečně nasaďte kryt prostoru pro baterie.
Počáteční kalibrace
For optimal accuracy, it is recommended to perform an initial calibration upon first use or after prolonged storage. Use the provided calibration solution for this process. Refer to the quick start guide for detailed calibration steps specific to your model.
Návod k obsluze
Zapnutí/vypnutí
Press the power button (circular arrow icon) to turn the tester on. Press and hold the power button for a few seconds to turn it off.
Měření
- Ensure the tester is clean and dry before use.
- Immerse the probe end of the tester into the samproztoku a ujistěte se, že je senzor zcela ponořený.
- Allow a few moments for the reading to stabilize on the large LCD screen. The display will show the TDS value and temperature.
- Record the measurement as needed.
- Rinse the probe with distilled water after each measurement to prevent cross-contamination.
Pochopení displeje
The LCD screen displays the primary measurement (TDS) and the temperature. The device includes built-in diagnostics to assist with troubleshooting and ensure reliable readings.
Údržba
Čištění sondy
Regular cleaning of the probe is crucial for accurate readings. Rinse the probe thoroughly with distilled or deionized water after each use. For stubborn residues, gently wipe the probe with a soft cloth or cotton swab. Avoid abrasive materials that could damage the sensor.
Výměna baterie
When the battery indicator appears on the display, replace the 4 AAA batteries as described in the Setup section. Always use fresh batteries for optimal performance.
Skladování
Store the tester in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the probe is clean and dry before storage. If storing for extended periods, remove the batteries to prevent leakage.
Odstraňování problémů
Nepřesná čtení
- Ujistěte se, že je sonda čistá a bez nečistot.
- Perform a calibration using fresh calibration solution.
- Check for air bubbles around the probe during measurement.
- Ověřte sample temperature is within the operating range.
No Display/Power Issues
- Zkontrolujte, zda jsou baterie správně vloženy a zda jsou dostatečně nabité. V případě potřeby je vyměňte.
- Ujistěte se, že je kryt bateriového prostoru bezpečně uzavřen.
Pomalá doba odezvy
- Clean the probe thoroughly.
- Allow sufficient time for the reading to stabilize, especially in samples with varying temperatures.
Specifikace
| Atribut | Hodnota |
|---|---|
| Číslo modelu | 9531200 |
| Značka | HACH |
| Typ měření | Měřič TDS |
| Zdroj napájení | Napájení z baterie |
| Jsou vyžadovány baterie | 4 baterie AAA (součástí balení) |
| Hmotnost položky | 9.6 unce |
| Rozměry balení | 8.74 x 4.72 x 2.36 palce |
| Výrobce | Hach |
| Datum první dostupnosti | 16. prosince 2014 |
Záruka a podpora
Hach products are manufactured to high standards of quality and reliability. For specific warranty information pertaining to your Hach 9531200 Pocket Pro Low Range TDS Tester, please refer to the documentation included with your purchase or visit the official Hach webmísto.
For further assistance, technical support, or to explore other Hach products, please visit the HACH Store on Amazon.