Návod k obsluze náhradního venkovního senzoru pohybu Defiant 270 stupňů v černé barvě

1. Konec produktuview

The Defiant DF-5716-BK is a 270-degree black replacement outdoor motion sensor designed to enhance security and convenience for outdoor lighting systems. This sensor detects motion within its specified range and activates connected lights, providing illumination when needed. It is suitable for various outdoor applications, including gardens, terraces, and walkways, and is compatible with Heath Zenith Par Lights.

Image 1: Defiant DF-5716-BK 270 Degree Black Replacement Outdoor Motion Sensor. This image displays the compact, black-colored motion sensor unit with its distinctive curved detection lens and adjustable mounting base.

2. Bezpečnostní informace

Před instalací nebo provozem tohoto produktu si prosím přečtěte a pochopte všechny pokyny. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo jiným nebezpečím, která by mohla způsobit škody na majetku nebo zranění osob.

• VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Před instalací nebo servisem odpojte napájení v jističi nebo v pojistkové skříni.
• Ujistěte se, že všechna elektrická připojení jsou provedena v souladu s místními předpisy a vyhláškami.
• This product is designed for outdoor use and is waterproof. However, ensure proper sealing during installation to maintain its integrity.
• Do not attempt to modify or repair the sensor. Refer all servicing to qualified personnel.
• Uchovávejte obalové materiály mimo dosah dětí.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• Defiant 270 Degree Replacement Motion Sensor (Model DF-5716-BK)
• Mounting hardware (typically screws and wire nuts)
• Návod k použití (tento dokument)

4. Specifikace

5. Instalace

This section provides general guidelines for replacing an existing motion sensor. Specific wiring diagrams may vary; always consult the original fixture's instructions or a qualified electrician if unsure.

1. Vypnout napájení: Locate the circuit breaker or fuse that supplies power to the outdoor light fixture and turn it OFF. Verify power is off using a voltage tester.
2. Demontáž starého senzoru: Carefully disconnect the wiring from the old motion sensor. Note the wire connections (typically Line, Load, and Neutral/Ground).
3. Příprava nového senzoru: Thread the wires from the new Defiant motion sensor through the mounting plate or fixture opening.
4. Kabelová připojení:
   • Připojte černý vodič from the sensor to the černý (žhavý) drát z napájecího zdroje.
   • Připojte červený drát from the sensor to the black (load) wire svítidla.
   • Připojte bílý drát from the sensor to the bílý (neutrální) vodič from the power supply and the light fixture.
   • Připojte zemnící vodič (bare copper or green) from the sensor to the fixture's ground wire and the house ground wire.

   Zajistěte všechna spojení drátěnými maticemi a elektrickou páskou.

5. Montáž senzoru: Securely attach the new motion sensor to the fixture or mounting box using the provided hardware. Ensure it is oriented correctly for optimal detection.
6. Spoje těsnění: Apply weather-resistant sealant around the mounting base to prevent water intrusion, especially if exposed to direct weather.
7. Obnovit napájení: Znovu zapněte napájení jističem.

6. Nastavení a seřízení

After installation, adjust the sensor's settings for optimal performance.

• Testovací mód: Most motion sensors have a test mode. Upon initial power-up, the sensor may enter a test mode where lights turn on for a short period (e.g., 5-10 seconds) with each detection, regardless of ambient light. This allows for quick aiming and sensitivity testing.
• Nastavení citlivosti: Use the sensitivity dial (if present) to adjust how easily the sensor detects motion.
  • Turn clockwise for higher sensitivity (detects smaller movements or at greater distances).
  • Turn counter-clockwise for lower sensitivity (reduces false triggers from small animals or distant objects).
• Úprava času: Use the time dial (if present) to set how long the light remains on after motion is no longer detected. Common settings range from a few seconds to several minutes.
• Light Level (Dusk-to-Dawn) Adjustment: Some sensors include a photocell adjustment to determine the ambient light level at which the sensor becomes active. This prevents the light from turning on during daylight hours.
• Aiming the Sensor: Physically adjust the sensor head to cover the desired detection area. Walk through the intended detection zone to verify coverage and make fine adjustments.

7. Návod k obsluze

Once installed and adjusted, the Defiant motion sensor operates automatically:

• During nighttime (or when ambient light is below the set threshold), the sensor will detect motion within its 270-degree, 100-foot range.
• Upon detection, the connected light fixture will illuminate for the duration set by the time adjustment dial.
• If motion continues to be detected, the light will remain on or reset its timer.
• After motion ceases and the set time expires, the light will turn off.
• During daylight hours (or when ambient light is above the set threshold), the sensor will typically remain inactive, conserving energy.

8. Údržba

The Defiant motion sensor requires minimal maintenance to ensure continued performance.

• Čištění: Pravidelně otírejte čočku snímače měkkým hadříkemamp cloth to remove dust, dirt, or debris that may obstruct its view. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Inspekce: Annually inspect the sensor and its wiring for any signs of damage, wear, or loose connections. Ensure the mounting remains secure.
• překážky: Keep the detection area clear of growing foliage, branches, or other objects that could block the sensor's view or cause false triggers.

9. Řešení problémů

If your motion sensor is not functioning as expected, try the following steps:

10. Záruka a podpora

This Defiant motion sensor comes with a 1letá omezená záruka od data nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání.

For warranty claims, technical assistance, or further inquiries, please contact Defiant customer support. Keep your proof of purchase for warranty validation.

Contact information for Defiant customer support can typically be found on the product packaging or the official Defiant webmísto.