Alpine CDE-151

Alpine CDE-151 CD/MP3/WMA Receiver User Manual

Model: CDE-151

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Alpine CDE-151 CD/MP3/WMA Receiver. Please read this manual thoroughly before using the unit to ensure proper operation and to prevent damage.

2. Bezpečnostní informace

  • Napájení: This unit is designed for 12V DC negative ground electrical systems. Ensure proper voltage, aby nedošlo k poškození.
  • Zapojení: Connect all wires correctly and securely. Incorrect wiring can cause fire or malfunction. Refer to the wiring diagram carefully.
  • Umístění instalace: Nainstalujte jednotku na místo, které nebrání řidiči view or interfere with vehicle operation. Avoid locations exposed to direct sunlight, extreme heat, or moisture.
  • Úroveň hlasitosti: Do not operate the unit at excessively high volume levels for extended periods, as this may cause hearing damage or distract from driving.
  • Demontáž: Do not attempt to disassemble or modify the unit. This may result in electric shock, fire, or other accidents. Refer all servicing to qualified personnel.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

  • Alpine CDE-151 Head Unit
  • Kabelový svazek
  • Montážní pouzdro a ozdobný kroužek
  • Installation Hardware (screws, removal keys)
  • Uživatelská příručka (tento dokument)

4. Instalace

4.1 Zapojení kabeláže

Before making any connections, disconnect the vehicle's negative battery terminal to prevent short circuits. Refer to the wiring diagram below for proper connections. Each wire is color-coded for identification.

Zadní view of Alpine CDE-151 with wiring harness and RCA outputs

Figure 1: Rear Panel and Wiring Connections. This image displays the rear of the Alpine CDE-151 receiver, showing the main wiring harness connector, antenna input, and RCA preamp outputs. The color-coded wires of the harness are visible, indicating connections for power, ground, speakers, and accessory functions. Ensure all connections are secure and insulated.

  • Žlutá (konstantní výkon): Připojte k trvalému napájení 12V ve vozidle.
  • Červená (napájení příslušenství): Connect to the vehicle's ignition-switched 12V power supply.
  • Černá (zem): Připojte k čistému kovovému bodu na podvozku vozidla.
  • Modrá/bílá (dálkové zapnutí): Připojte k dálkovému zapínacímu kabelu externího ampvysílač nebo napájecí anténa.
  • Dráty reproduktorů: Connect to the corresponding vehicle speaker wires (e.g., White/White-Black for Front Left, Gray/Gray-Black for Front Right, Green/Green-Black for Rear Left, Purple/Purple-Black for Rear Right).
  • RCA Preamp výstupy: Připojte k externímu amplifiers for front, rear, or subwoofer channels.

4.2 Montáž jednotky

The CDE-151 is a single-DIN unit. Use the supplied mounting sleeve and hardware to secure the unit in the vehicle's dashboard opening. Ensure the unit is firmly seated and does not vibrate. After mounting, attach the trim ring for a finished appearance.

Strana view of Alpine CDE-151 receiver chassis

Obrázek 2: Strana View of Receiver Chassis. Tento obrázek ukazuje boční profesionálafile of the Alpine CDE-151 receiver, highlighting the metal chassis with ventilation holes and mounting screw points. This view is useful for understanding the unit's dimensions and how it fits into a standard single-DIN opening.

5. Počáteční nastavení

After installation, reconnect the vehicle's negative battery terminal. The unit will power on. Follow these steps for initial setup:

  1. Zapnutí: Stiskněte tlačítko SOURCE/⑂ tlačítko pro zapnutí jednotky.
  2. Nastavení hodin: Access the setup menu to set the correct time. Refer to the 'System Settings' section for detailed instructions.
  3. Počáteční nastavení zvuku: Adjust basic audio parameters like Bass, Treble, Balance, and Fader to your preference.

6. Návod k obsluze

This section details the functions of the front panel controls and various playback modes.

Front panel of Alpine CDE-151 CD receiver

Obrázek 3: Ovládací prvky na předním panelu. This image displays the front face of the Alpine CDE-151 receiver, highlighting the main rotary encoder, source button, bass button, band button, and preset buttons. The display shows 'BASS ENGINE', indicating an active audio feature. This view is essential for understanding how to operate the unit.

6.1 Základní ovládací prvky

  • Rotary Encoder (Volume Knob): Turn to adjust volume. Press to access audio settings or confirm selections.
  • SOURCE/⑂ Button: Press to switch between input sources (CD, USB, AUX, Tuner). Press and hold to turn the unit off.
  • Tlačítko BASS: Directly access Bass Engine settings for quick bass adjustments.
  • Tlačítko BAND: In Tuner mode, press to switch between FM1, FM2, FM3, and AM bands.
  • Přednastavená tlačítka (1–6): Store and recall radio stations. In CD/USB mode, these may function as direct track selection or folder navigation.
  • Forward/Backward Buttons (◀◀/▶▶): Skip tracks/files or seek radio stations.

6.2 Přehrávání CD

  1. Insert a CD into the disc slot with the label side up. The unit will automatically load and begin playback.
  2. Use the ◀◀/▶▶ buttons to skip tracks.
  3. Press the Rotary Encoder to pause/play.

6.3 Přehrávání z USB

  1. Connect a USB storage device to the front USB input.
  2. Stisknutím tlačítka SOURCE vyberte USB.
  3. Use the ◀◀/▶▶ buttons to navigate tracks. Use the preset buttons for folder navigation if applicable.
  4. Přístroj podporuje audio formáty MP3 a WMA files.

6.4 Pomocný vstup

  1. Connect an external audio device (e.g., smartphone, portable music player) to the front 3.5mm auxiliary input jack.
  2. Press the SOURCE button to select AUX.
  3. Ovládejte přehrávání z připojeného zařízení.

6.5 Rádiový tuner

  1. Press the SOURCE button to select Tuner.
  2. Press the BAND button to select FM1, FM2, FM3, or AM.
  3. Use the ◀◀/▶▶ buttons to seek for stations. Press and hold for manual tuning.
  4. To store a preset: Tune to the desired station, then press and hold one of the preset buttons (1-6) until you hear a beep.
  5. To recall a preset: Briefly press the desired preset button (1-6).

6.6 Nastavení zvuku

The CDE-151 features a 3-Band Equalizer and Bass Engine for sound customization.

  • Accessing Audio Settings: Press the Rotary Encoder to enter the audio menu. Turn the encoder to navigate through options like Bass, Mid, Treble, Balance, Fader, and Subwoofer level (if connected). Press the encoder to select an option and turn to adjust.
  • Bass Engine: Press the BASS button for quick access to bass enhancement features.

7. Údržba

  • Čištění jednotky: Přední panel otřete měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
  • Péče o disky: S CD manipulujte za hrany. Udržujte je čisté a bez škrábanců.
  • USB port: Udržujte USB port bez prachu a nečistot.

8. Řešení problémů

Problém Řešení
Žádná síla Check power connections (Yellow, Red, Black wires). Ensure vehicle battery is charged. Check vehicle fuses.
Žádný zvuk Check speaker wire connections. Ensure volume is not muted or too low. Verify amplifier remote turn-on (Blue/White wire) if using external amps.
CD/USB se nepřehrává Ensure disc is inserted correctly and is not scratched/dirty. For USB, ensure device is formatted correctly (FAT16/32) and contains supported file types (MP3/WMA).
Příjem rádia je špatný Check antenna connection. Ensure antenna is fully extended (if applicable). Try tuning to a stronger station.

9. Specifikace

  • Rozměry produktu: 9.06 x 3.94 x 10.63 palce
  • Hmotnost položky: 3.1 libry
  • Výstupní výkon: 50 Watts x 4 Channels (Max), 18 Watts x 4 Channels (RMS)
  • Počet kanálů: 4
  • Technologie připojení: Pomocný, USB
  • Speciální funkce: Equalizer (3-Band EQ, Bass Engine)
  • Režim výstupu zvuku: Stereo
  • Kompatibilní zařízení: Smartphone, reproduktor
  • Výrobce: Vysokohorský

10. Záruka a podpora

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Alpine webUschovejte si účtenku jako doklad o koupi pro případ reklamace.