Littelfuse FLM3-2/10 FLM3.20 Cartridge Fuse User Manual

1. Úvod

This manual provides essential information for the safe and proper use of the Littelfuse FLM3-2/10 FLM3.20 Cartridge Fuse. This fuse is designed to protect electrical circuits from overcurrent conditions, preventing damage to equipment and reducing fire hazards. Please read this manual thoroughly before installation or replacement.

2. Bezpečnostní informace

VAROVÁNÍ: Electrical shock hazard. Improper installation or handling of electrical components can result in serious injury or death. Always follow these safety guidelines:

• Před instalací, kontrolou nebo výměnou pojistek vždy odpojte napájení obvodu.
• Use only fuses with the correct voltage a amperage ratings for the specific application. Using an incorrect fuse can lead to inadequate protection or circuit damage.
• Neobcházejte ani tamps pojistkami.
• If you are unsure about any electrical work, consult a qualified electrician.
• Při práci s elektrickými obvody používejte vhodné osobní ochranné prostředky (OOP), jako jsou izolační rukavice a ochranné brýle.

3. Konec produktuview

The Littelfuse FLM3-2/10 FLM3.20 is a cartridge fuse designed for reliable overcurrent protection. It features a 3-2/10 Amp current rating and a 250 Volt voltage rating, suitable for various electrical applications. The fuse is constructed from ceramic, metal, and plastic components, and is designed for through-hole mounting.

Figure 1: Image of the Littelfuse FLM3-2/10 FLM3.20 Cartridge Fuse. This image displays the cylindrical body of the fuse, typically with metal end caps and markings indicating its current and voltage hodnocení.

4. Instalace a nastavení

Follow these steps for safe installation or replacement of the fuse:

1. Odpojit napájení: Ensure that the main power supply to the circuit is completely turned off and locked out, if applicable. Verify with a voltage tester.
2. Identifikace držáku pojistky: Locate the fuse holder or circuit board where the fuse is to be installed or replaced.
3. Vyjměte starou pojistku (pokud je k dispozici): Carefully remove the old or blown fuse from its holder. Note its orientation if it's a directional fuse (though cartridge fuses are typically non-directional).
4. Verify Ratings: Confirm that the new Littelfuse FLM3-2/10 FLM3.20 fuse matches the required amperage (3-2/10 Amp) a svtage (250V) ratings for the circuit.
5. Vložte novou pojistku: Insert the new fuse into the fuse holder. For through-hole mounting, ensure the leads are correctly aligned with the holes on the circuit board or terminal block.
6. Zabezpečené připojení: Ensure the fuse is securely seated in its holder or properly soldered if it's a permanent through-hole mount.
7. Obnovit napájení: Once the fuse is securely installed, restore power to the circuit.

5. Princip fungování

The Littelfuse FLM3-2/10 FLM3.20 fuse functions as a sacrificial device designed to protect electrical circuits. When an overcurrent condition occurs (current exceeding 3-2/10 Amps), the metallic element inside the fuse melts, creating an open circuit and interrupting the flow of electricity. This prevents damage to more expensive components or wiring downstream from the fuse. The fuse does not require any active "operation" by the user; its function is passive and automatic upon an overcurrent event.

6. Údržba

Fuses are generally maintenance-free components. Their primary function is to blow and protect the circuit. Regular maintenance involves:

• Pravidelná prohlídka: Visually inspect fuses during routine equipment maintenance for any signs of damage or discoloration, though a blown fuse is often not visually obvious without removal.
• Nahrazení: A blown fuse must always be replaced with a new fuse of the exact same type, amperage, a svtage rating (e.g., Littelfuse FLM3-2/10 FLM3.20). Never attempt to repair a blown fuse.

7. Řešení problémů

If a fuse blows, it indicates an overcurrent condition in the circuit it protects. Follow these troubleshooting steps:

1. Identifikace spálené pojistky: Disconnect power and visually inspect the fuse. Some fuses have an indicator, or you can use a multimeter to check for continuity.
2. Zjistěte příčinu: Před výměnou pojistky zjistěte a odstraňte příčinu nadproudu. Mezi běžné příčiny patří:
   • Short circuits in wiring or components.
   • Overloaded circuits (too many devices drawing power).
   • Faulty electrical appliances or equipment.
3. Vyměnit pojistku: Only after the cause has been identified and corrected, replace the blown fuse with a new Littelfuse FLM3-2/10 FLM3.20 fuse of the identical rating.
4. Repeated Blowing: If the new fuse blows immediately or shortly after replacement, it indicates that the underlying problem has not been resolved. Disconnect power and seek professional assistance.

8. Specifikace

9. Záruka a podpora

Littelfuse products are manufactured to high-quality standards. For specific warranty information, please refer to the official Littelfuse webwebu nebo se obraťte přímo na jejich zákaznickou podporu. Uschovejte si doklad o koupi pro případ reklamace.

For technical support or inquiries, please visit the Littelfuse official webmísto nebo kontaktujte jejich oddělení zákaznických služeb.