SOUNDSATION KS-10 Nastavitelný ocelový stojan na klávesy Uživatelská příručka

1. Úvod

Thank you for choosing the SOUNDSATION KS-10 Adjustable Steel Keyboard Stand. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your new keyboard stand. Please read this manual thoroughly before use and retain it for future reference.

The KS-10 stand is designed to provide stable support for various keyboards and small to medium-sized workstations. Its robust steel construction and adjustable height mechanism ensure optimal comfort and performance for musicians.

2. Bezpečnostní informace

Pro zajištění bezpečného provozu a prevenci poškození dodržujte prosím následující bezpečnostní opatření:

• Always ensure the stand is placed on a flat, stable, and non-slip surface.
• Do not exceed the maximum weight capacity of the stand. While not explicitly stated, ensure the stand can comfortably support your instrument.
• Before placing an instrument, verify that all adjustment mechanisms are securely locked in place.
• Keep fingers and clothing clear of moving parts during adjustment to prevent pinching.
• Do not allow children to play with or climb on the stand.
• Regularly inspect the stand for any signs of wear, damage, or loose components. Do not use if damaged.

3. Obsah balení

The SOUNDSATION KS-10 package typically includes:

• 1 x SOUNDSATION KS-10 Keyboard Stand (main frame)
• 4 x Rubber end caps for feet (pre-installed or separate)
• 4 x Rubber sleeves for instrument support arms (pre-installed or separate)
• Assembly tool (if required for initial setup, e.g., Allen key)

Note: Components may vary slightly. Please check all packaging carefully.

4. Pokyny k nastavení

Follow these steps to assemble and set up your KS-10 keyboard stand:

4.1 Rozložení stojanu

1. Opatrně vyjměte stojan z obalu.
2. Place the folded stand on a flat surface.
3. Gently pull the two main sections of the stand apart until the X-frame begins to open.

Figure 1: The SOUNDSATION KS-10 Keyboard Stand in its open X-frame configuration. This image shows the stand ready for use, with the top arms and bottom feet extended.

4.2 Nastavení výšky

The KS-10 features a 5-position snap mechanism for quick and easy height adjustments:

1. Locate the central adjustment mechanism on the stand. This typically involves a spring-loaded pin and a series of holes.
2. Press the spring-loaded pin to disengage it from its current position.
3. While holding the pin, adjust the height of the stand by moving the X-frame inwards or outwards.
4. Once the desired height is reached (between 640mm and 980mm), release the pin, ensuring it securely locks into one of the five available holes.
5. Gently test the stand's stability before placing your instrument.

Figure 2: Illustration of the quick height adjustment feature, showing the stand can be adjusted between 640mm and 980mm using a 5-position snap mechanism.

5. Obsluha stojanu

Once assembled and adjusted, using your KS-10 stand is straightforward:

1. Ensure the stand is stable and on a level surface.
2. Carefully place your keyboard or workstation onto the support arms of the stand. Ensure it is centered and balanced.
3. The rubber sleeves on the support arms provide grip and protect your instrument from scratches.
4. Before playing, gently push down on the instrument to confirm it is securely seated and the stand remains stable.

Figure 3: A musician using the SOUNDSATION KS-10 stand with a keyboard in a typical indoor setup, demonstrating its practical application.

Figure 4: The SOUNDSATION KS-10 stand being used by musicians in an outdoor setting, emphasizing its lightweight and portable design for various environments.

6. Údržba

Proper maintenance will extend the life of your keyboard stand:

• Čištění: Otřete stojan měkkým hadříkemamp cloth to remove dust and dirt. Avoid abrasive cleaners or solvents that could damage the epoxy finish.
• Inspekce: Periodically check all joints, bolts, and the adjustment mechanism for tightness and proper function. Ensure the rubber end caps and sleeves are intact and not worn.
• Skladování: When not in use, fold the stand for compact storage. Store in a dry environment away from extreme temperatures.

7. Řešení problémů

If you encounter issues with your KS-10 stand, refer to the following:

• Stojan se zdá být nestabilní:
  • Ujistěte se, že stojan stojí na rovném a vodorovném povrchu.
  • Verify that the height adjustment pin is fully engaged in one of the holes.
  • Check that all rubber feet are present and making contact with the ground.
• Obtížnost nastavení výšky:
  • Ensure the spring-loaded pin is fully depressed before attempting to adjust.
  • Check for any obstructions in the adjustment mechanism.
  • Apply a small amount of silicone-based lubricant to the moving parts if resistance persists (avoid oil-based lubricants).
• Instrument sliding on support arms:
  • Ensure the rubber sleeves on the support arms are clean and free of dust or debris.
  • Verify that the instrument is centered and balanced on the stand.

8. Specifikace

Poznámka: Specifikace se mohou změnit bez předchozího upozornění.

9. Záruka a podpora

SOUNDSATION products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or spare parts, please refer to the warranty card included with your purchase or visit the official SOUNDSATION webmísto.

For further assistance, please contact your local dealer or SOUNDSATION customer service.