Zavedení
Welcome to the user manual for your OttLite Rimless Pendant LED Magnifier. This manual provides essential information for the safe and effective use of your device. Please read it thoroughly before operation and retain it for future reference.
Důležité bezpečnostní pokyny
- Nedívejte se přímo do světla LED.
- Keep the magnifier away from direct sunlight to prevent fire hazards.
- Tento výrobek není hračka. Uchovávejte mimo dosah dětí.
- Zlikvidujte baterie v souladu s místními předpisy.
- Nekombinujte staré a nové baterie ani různé typy baterií.
- Nepokoušejte se zařízení rozebírat nebo upravovat.
Obsah balení
- OttLite Rimless Pendant LED Magnifier
- Šňůrka
- 2x baterie CR2032
Nastavení
1. Instalace baterie
- Locate the battery compartment on the back of the magnifier.
- Otevřete kryt přihrádky.
- Insert two (2) CR2032 batteries, ensuring correct polarity (+/-).
- Bezpečně zavřete kryt bateriového prostoru.
2. Připevnění šňůrky
Thread the lanyard through the designated loop on the magnifier. Adjust the length for comfortable wear around your neck.
Image: The OttLite Rimless Pendant LED Magnifier, showing its clear rimless lens, white body with the OttLite logo, and an attached grey lanyard. This image illustrates the overall design and how the lanyard connects to the device.
Návod k obsluze
1. Using the Magnifier
Hold the magnifier approximately 1-2 inches above the object you wish to view. Adjust the distance until the object appears clear and magnified.
2. Activating the LED Illumination
Locate the power switch on the side of the magnifier. Slide the switch to the "ON" position to activate the LED light. Slide it to "OFF" when not in use to conserve battery life.
Image: The OttLite Rimless Pendant LED Magnifier with its LED light illuminated, demonstrating the bright light emitted from the lens area. This shows the magnifier ready for use with its lighting feature.
Image: A person's hand holding the OttLite Rimless Pendant LED Magnifier over a detailed chart with small numbers and symbols, illustrating the magnifier in active use for reading fine print.
Image: A person's hands holding the OttLite Rimless Pendant LED Magnifier over a detailed chart, with crafting threads and a thimble visible in the background, demonstrating its utility for hobbies and detailed work.
Údržba
Čištění
To clean the lens, gently wipe with a soft, lint-free cloth. For stubborn smudges, a small amount of lens cleaning solution can be applied to the cloth, not directly to the lens.
Výměna baterie
When the LED light dims or fails to illuminate, it is time to replace the batteries. Follow the battery installation steps in the "Setup" section. Ensure you use two new CR2032 batteries.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| LED světlo se nerozsvítí. | Baterie jsou vybité nebo nesprávně nainstalované. | Replace batteries with new CR2032 cells, ensuring correct polarity. Check that the power switch is in the "ON" position. |
| Magnified image is blurry. | Incorrect distance from object; dirty lens. | Adjust the distance between the magnifier and the object. Clean the lens with a soft, lint-free cloth. |
Specifikace
- Model: MG010PT
- Zvětšení: 3X Optical Grade
- Světelný zdroj: LED
- Zdroj napájení: 2x baterie CR2032
- Materiál: Plast
- Barva: Bílý
- Rozměry (D x Š x V): Přibližně 4.78 x 9.53 x 19.69 cm (1.88 x 3.75 x 7.75 palce)
- Hmotnost: Přibližně 649 g
- Speciální vlastnosti: Rimless design, Lanyard included
Záruka a podpora
For warranty information or technical support, please contact OttLite customer service. Refer to the product packaging or the official OttLite webstránky s aktuálními kontaktními údaji.
Webmísto: www.ottlite.com
